Комментарии:
Can you use the ADAT on the Babyface Pro instead?
ОтветитьHello I need to help. Can I hook up wireless microphone go to Preamp go to compressor go to Di box dbx DI4 Active 4-Channel Direct Box.
Di box go to mixer. It is work. Can you let me know thank you so much.
I have this exact set except the compressor. So do i use the TRS cable from the slate into the mic input of the rme and then his pad in the totalmixer???
Ответитьnoob question here but... Do I set my input gain on my interface to 0db and then adjust the gain on the compressor?
ОтветитьHay sir can u help me with interference. When playing karaoke from KaraFun my laptop top with the Yamaha usb. Every song gets hit with some interference. Help
ОтветитьThank you! I appreciate the information!
ОтветитьMIC works.. but the Compressor Needle dont what can i do ?
ОтветитьI'm relatively new to this so I keep asking one question: When a preamp is connected to an interface to a line input, what happens in the recording. Is the recorded sound bypassing the interface amplifier and recording the sound from the preamplifier. Or no matter what the line input is, the preamplifier on the interface has an influence on the recording? I hope I made the question understandable. I wanted to say, if you have a good preamp, does it even matter what the usb interface is.
ОтветитьHi. Can i ask question? I have Apollo twin usb, Evo Sp8 mic preamp which has connect by adat and Klark teknik eqp-kt. How can i connect them? I checked my eq after i connected but no sound difference. I setup in uad console. I put Clock source Adat, Digital input Adat in uad console. I put digital source as well on my evo. What should i do? Do i need more things? cables... or??? Please help me.😢😢😢 🙏🙏🙏 Thanks.
ОтветитьWrong mic to use a mic pre and compressor with lol that's a modeling mic..
ОтветитьExactly what I was looking for, thank you sm
ОтветитьI have 1073 to a 5254. When do you use the return and sends?
ОтветитьYou still use this same chain when you these Dec 2022?
ОтветитьExcellent video. Clear and very demonstrative. I loved how you showed us where the wires go (input and output).
ОтветитьI have a focusrite 2i2 and am picking up a wa73eq.
Can I run a balanced trs cable from wa73 output into the 2i2?
Can I use this same setup for home studio, just with different mic and different interface?
WA87 R2 mic and Focusrite Scarlett
Would I need phantom power with this setup?
Edit: *Phantom power question I BELIEVE was answered (engage PP to Pre-Amp not Interface)
I use a mic pre to an evo 4. Mic pre manufacturer said I should use trs into the interface. But via xlr sounds better like what you did I have more headroom and gain to spare. Need your help, I don’t want to break anything. Thanks
ОтветитьSir,Thanks for Great Tutorial.I request tutorial for hooking up dual Compressor.
ОтветитьMy interface already has a preamp. Do I need a preamp to make my compressor work?
ОтветитьGreat video, very informative. The only thing i am still confused about is, if your preamp has a phantom power switch, should i use this as well as the phantom power within Totalmix Fx?
Ответитьthanks
ОтветитьTurn down the gain in interface and use the preamp?
ОтветитьCan you use this on forcusrite?
ОтветитьCould I connect that ML-1 directly to the RME or the interface of my choice? Looking at getting this awesome mic.
Ответитьstop jumping in 100 video cuts , jump direct to the problem , i dont want to see ur f face
ОтветитьThanks bro 🙏🔥
ОтветитьThanks for the video. I didn't know that you can hook a compressor to slate vms. Sounds great
ОтветитьCool
Ответить