How To Hook Up An Amp to a Home Stereo

U need to get 2 subwoofers asap before u blow out ur speakers🤦‍♂️🤦‍♂️🤦‍♂️

Using the rca inputs on the back of that power amp directly to the crown is useless from what i heard. The pre out voltage from the avr is low and won’t drive the crown well. Is it true that I should be using a CleanBox Art Pro inbetween the avr and amp to convert the rca signal to balanced at a higher preamp voltage?

Funny as hell I can't hear you. Selling sound and you don't turn it up? Please big guy turn it up so I can turn it down. Isn't it obvious that I can't turn it up any louder?

Isn’t the receiver an amplifier anyway ?

I have a question, is it possible to connect the receiver with the subwoofer output to the car amplifier and power the subwoofer

I am totally blind. I have no vision whatsoever. I recently purchased a Sony receiver model number STR Dash K700 and it did not come with a remote sadly to say. I have a Alexa echo dot from 2021 is shaped like a hockey puck it has one power input slot, and I believe it’s a auxiliary out slot. I would call it, I was curious to know if I can connect this Alexa echo dot to my receiver because this particular model Sony STR Dash K 700 does not have an auxiliary out slot in the front or on the face of the receiver. It only has a microphone out slot so if there is a way I can hook this thing up with a particular style of cord or RCA cord. Would it be possible for you to leave me the name and the model of that particular cord because right now it is just a huge paperweight without the remote I can’t even change the tune up or tune down for AMN FM stations, thank you so much. I pray you can help keep up the great work.

man! was hard to find this video, this is exactly what i was wondering, if i added an external amp for my front speakers AND using the preouts of my recievers the volumen control of my receiver will work! and only this video has the answer! thank you :) i know a pre amp is the better way, at least that is what the expert always tell, but 1300$ for a parasound preamp? man... no bueno... at least not rightnow but maybe in the future

This is great for old high-end stuff or new lower-end stuff. How about wiring from a preamp with the 2 RCA's to a 5-channel amp that has only one RCA input per channel, but 5 altogether?

My reciever has a sub out, what can I connect to that?

What if I want to power a subwoofer?

Hi, i have a Sony STR-DH590 in my living room and a vintage receiver in my she cave. My Sony keeps saying protect i think and then cuts off. I took a shelf out of my cabinet to keep it cooler because i feel alot of heat coming from the top of it. What do you recommend? I thought of maybe hooking a small fan to the wall behind it to blow cooler air onto it. It used to never do this. 😊

Good shit. Now can you show how to hook up a car app to a receiver?

Now how do you hook up a subwoofer

Omg I have fell down a rabbit hole with stereo equipment, I had a nice onkyo receiver did not have a pre out so I bought a 1000$ yamaha integrated amp, it clips and had to have it replaced. Now I have a new one, but it clips, the reason are my huge cerwin vega xls 215 $1700 a pair speakers , you can not hook up a amp to a integrated amp so I am out the 1000$ I spent on my Yamaha, from your video If not mistaken, I need to
1. Buy a receiver the has “pre out” my original onkyo did not”
2. Buy a amp and plug into the preout on my new receiver.
3. My cerwin vega xls 215 are rated at 500 watts, make sure the amp I buy will put out at least 400 watts

I do not have connected to tv only phono cd turn table cassette and xm satellite

Do you have to manually turn the amplifier off every time before you turn off your receiver? Basically I want to continue using my remote to turn my receiver on and off. I don't want to have to get up and turn off the amplifier and then turn the receiver off, and vice versa, get up and turn the amplifier on manually, then turn on the receiver.

This was good video . But I still needed it dumbed down for the 2nd portion where he was making connections in front of the TV. It’s definitely one of those it’s not you it’s me moments I suppose . I’ll keep re watching to make sure I got it right .
Thanks for your instruction and video .

Well done! I knew it was simple but needed the visual!

I have the same Onkyo. I have 4 speakers on the “A” channel and 4 speakers on the “B” channel. The A channel is in my house and the B channel is in my garage. It seems like the set up you describe will make the switch no longer work. Am I right?

Hello sir. Can you run another amp from the amp you installed in the video?

Thank you so much for making this video. It helps me to understand how to connect. My question is I have two AVR CAN I use one of them to amplify the front Chanels LCR ? My home theater system is 7.2 thanks 😊

Hey thanks for the video. Quick question. Where did you get that tv/HT table at? I just ordered a new marantz and two amps and need more room and that one looks perfect.

Sub woofer still through onkyo?

'LOVE THIS!! THANKS!!!

Something I've never quite understood about adding an amplifier - my stereo receiver is a 100-watt output unit, and if I put the volume up past 3 or 4 on the dial, it's so loud my walls shake and my ears bleed. Why on earth would anyone need 400 watts? You can't possibly listen to anything that loud.

Do you know of any good reciever with a pre out setup like that with HDMI as well? I cant find anything.

Thanks boss

But can i use the receiver and amp with speakers in both?

I have a receiver pioneer but I want to connect another amp for more Power my pioneer receiver does not have pre-out How can I connected or do I need a device

What about if the receiver doesn't have pre Amp out

Are those the Cerwin Vega E712? Ironically, those are the speakers I am hooking up right now.

I was thinking about getting a crown xls also but wasn't sure how much hiss I would get from the tweeters on my klipsch

OMG I need help setting up my new to me sony 5130 tuner. I didn't see it has no volume control. I feel like such an idiot.

Question for ya- my pre amp is a 90's Carver and obviously doesn't have any way to sense the signal for trigger power from my receiver (so I will be pressing the power button every time). Do you know of a way to simplify this chance?

Can I hook a dj sub up too amp

what speakers are you using?

What if you ain't got no preamp or no spots where your speaker wires go on your amplifier

what if the stereo doesn't have a pre amp rca

The volume will be controlled by the receiver not the amp, correct?