Комментарии:
If i dont have the amd default backplate ? is this necessary for installation, or there is another solution
ОтветитьAre the USB connections required if not using the software to configure lights
ОтветитьHow do you set ur fans to exhaust?
ОтветитьOh god thank you! I thought I was going to have to buy a different liquid cooler so I could connect to my rectangle motherboard thing XD
Ответитьwhat happens if you smuge the past on the pump?
ОтветитьMine wont connect to the ICUE Software and wont light up
ОтветитьCould not unistall the brackets had to order some old ones and they wont be here until 2 fucking weeks, corsair why did you have to change this??
ОтветитьSuper cool, I only got 2 out of 4 screws to mount my bracket in the box. Lol.
ОтветитьCan someone help me
I am using the AM4 bracket that came with my mobo. Put the stand offs in and the y are very lose. How do you fix this
I have a r5 7600x oc 5.3 ghz and I think I have a problem, I have 85° C at 80-100% usage and 50° idle while my cpu is at 88° (5 mins stress test) my cpu cooling is at 36°, I screwed the screws as best as possible. When I turn off Cpu z my cpu has 53 degres after 20 sec. Someone in my case ?
ОтветитьThere are not the same cables that came in my H60x elite
ОтветитьWhy is there no manual included for the H100i RGB ELITE? Nothing in box, and no manual on the product page under downloads or support tab.
ОтветитьThe usb-c plug… Riiight right because mine came with that. Why are there so many variations of the same product? My pump only came with a 3-pin for the cpu path and a 4-pin for the pump. Provides 0 RGB to the pump.
ОтветитьThis is nothing like the h60x, all the wiring totally different
ОтветитьIve got the H100i and I’m having a lot of trouble with it because of it constantly saying the pump is failing even though I just bought it and installed it through this video, I don’t even know what to do anymore
ОтветитьDoes this support am5
ОтветитьMy cooler doesent have a usbc cable or place to plug it in to the pump header to
ОтветитьIs this cooler compatible with the AMD Ryzen 7 1700, and can it fit in a NZXT H510 case?
ОтветитьMy H100x RGB Elite came with 3 sets of Intel standoffs and I'm not sure which to use with LGA 1700 socket. One standoff is small (about 8mm body length) with a short wider screw on one side that I believe if LGA 2033. However, the other two are about 10mm (body) and 11mm (body) respectively and have thin screws on either side. I'm guessing one of these is the 1700 compatibility kit but none of these are labelled.
ОтветитьIm having a heck of a time installing this. I dont have any usb c plug into the motherboard. I'm assuming there's different versions of this cooler? I might have to go back and use my old liquid cooler because this one does not seem to have everything it needs.
ОтветитьHey there no install information for the H60X Elite there is no sata for power
ОтветитьCan I install the LCD expansion in this model?
ОтветитьGuys you might need to people to install this Cooler the standoffs are fucking tiny mate so you need to keep the backplate pressed so u can screw it on
Ответитьthere's no instruction manual and scanning the QR code on the box that says it goes to the manual actually just takes you to the web page advertising the item you've just bought, which is not at all helpful. I got it installed and figured it out but I'm really surprised how completely unhelpful Corsair is in regards to installing their own product.
ОтветитьEverything is installed correctly so why will my H60X not show up in iCUE?
ОтветитьIt good info but some wish it was a bit a little slower when talking about connecting all the wire. Some us are not that PC Savy.
ОтветитьWhy is the pump so loud even in quiet mode? It's audible
Ответитьcan i use backplate that is installed from my old corsair liquid cooler ?
ОтветитьI have no idea why you don't show which screws to use on the radiator. :(
ОтветитьYou guys should totally ship with instructions, instead of 1 video that covers 3 products each with different wires. Also maybe make your wires actually work? I’ve spent $700 on coolers from you this month and still don’t have a working PC. The LCD series is riddled with hardware issues and Corsair support is the biggest joke I’ve ever heard
Ответитьhow do I turn off the RBG? it is to bright at night
ОтветитьThere is absolutely NO information in the packet that refers to any mounting guide. Not a word! Nada!
This is way too bad!
What motherboard are you using???
Ответитьis there a way to set Pump speed to something lower without the huge 1 gigabyte iCue-Softtware? I've got a brand new PC and the pump is set to full-speed (DC) in Bios. Can i safely change that to something lower? Or is that ill advised?
ОтветитьWhy would they put a qr code to this video when the wiring is no where near the fucking same
ОтветитьI bought one of these off Newegg and it didn't come with the mounting hardware
Ответитьgreat product. one issue with this video. your manual says to have the fan as intake to run optimally but the video shows it as exhaust
ОтветитьBruh, mine didn't come with the screws wtf
ОтветитьHey, where did you get the clips on the side for the mounting(for the pump head)? I've been looking for them for ages as mine won't fit.
ОтветитьI have an H60x icue Elite. There's nowhere where I can plug any USB-C cable on it. I could not find any good documentation and quite disappointed that Corsair could not release a good tutorial or documentation. I have already placed the cooler on my CPU now. I see a little plastic with a cross, probably for a screwdriver but now that the cooler is on the mobo, it's not possible to reach that plastic thing. Anyone knows what's that plastic thing with the cross and why that exists?
ОтветитьOn a Corsair H60x RGB ELITE can you control the light,leds without having to buy the CORSAIR iCUE COMMANDER CORE XT Smart RGB Lighting and Fan Speed Controller
ОтветитьTried reaching out to Corsair to ask about the AM4 cpu bracket being slightly loose when installing the am4 brackets, couldn't get to a person. Was on hold for an hour and the Interactive Voice Response (IVR) System told me after holding for all that time to call back later or send an email & hung up on me. Corsair really really really needs to hire more staff for their call centers & pay a wage fair to the complexity of the devices they sell.
Ответитьnothing about how to determine air flow direction for orientation of the fans.....
Ответитьthanks for the video. I thought I might have an answer to a question about attaching the back plate. I wonder how did you manage to install the four pump screws without backplate kickback problem. did you start over and cut in the video? it is impossible to screw the pump if the back plate is not fixed. a comment helped us. the person is not sure why you missed something. I don't say anything, I'm a beginner. Lionel of France
ОтветитьI never realized the rubber corners on the fans were there to let us know when to stop pushing deeper with screw… I think I need to open up my case and unscrew them a little.
Ответитьis the iCUE Commander Core XT controller necessary for the cooler to work?
Ответить