Тэги:
#wireless #transmitter #lexus #key #remote #programming #chip #theft #immobilizer #engine #toyota #fob #alarm #deterrent #bypass #how_to #dealership #price #locksmith #DIY #lock #unlock #door #ignition #starter #code #security #light #indicator #techstream #software #GS300 #GS400 #IS300 #ES300 #RX350 #smart #cutting #duplication #automotive #ebay #aftermarket #trunk #release #pedals #FFC #electronics #add #camry #erase #lost #start #mode #range #replacement #battery #program #keyless #sienna #highlander #proximity #button #push #hack #scion #dealer #switchКомментарии:
I tried to program the remote. It does all of the steps when done including the last step when I hit the lock button on the key remote, but after that it doesn’t respond to the remote
ОтветитьThe busted master key did the car turn on with it still before you programmed the new key?
ОтветитьI have 1992 SE 400 and I’m pretty sure they used ignition and doorhandle lock from parts car car used to start and run fine but VATS went off and now I can’t get my Lexus to crank over even after It stops beeping.
ОтветитьWorked for me on my 2003 Camry LE. Thanks!!!
ОтветитьWill this work for the 2005 lexus rx330?
ОтветитьWhat if you not have original key?
ОтветитьThis will unlock the doors and trunk but it won't start the car correct?
Ответитьare you trolling me?
ОтветитьI have a 2003 Lexus LS 430 with a master key. I bought one new key with buttons on Ebay. I have been trying to program the transponder to make the car start unsuccessful, despite I have followed your instructions to do so within 35 seconds. I had repeat those steps many times already. The security light not staying solid before I insert new key after 5gas,6brake,1 gas but it keeps flashing forever, it seems never go out. I don't know why I am unable to program transponder key to make it work but I was able to program the buttons to lock, unlock doors. Do I need to buy a OBD cable with techstream software connect to a laptop to program my new key.?. Thanks
ОтветитьProbably should mention that this works on 2008 and older Toyota/Lexus vehicles. I tried this on a 2013 Highlander and it wouldn’t work. Have to either take the car to the dealership or get a key programming tool for anything newer.
ОтветитьHelp I programmed my remote, but the transmitter part won’t work n it wont start the car only unlock n lock with the buttons 06 lexus es330
ОтветитьGreat video! Thank you!!
Question: When you follow these reprogramming steps, will the old key(s) still work? Or do these steps somehow change the car’s programming so the old key(s) are inoperable?
I succeeded by watching your video. Thank you.
ОтветитьThis worked like a charm on my ‘99 Land Cruiser, even though it doesn’t have the security light. Followed all the instructions and just made sure to leave the key in for 60 seconds. Now if I could just get the key fob to work outside of the truck.
ОтветитьWill this trick work with Lexsu RX300?
ОтветитьSame steps for lexus ls 430? And can you change the key? These ones are old. Can you do this programming on the new types of keys in which key pops out when you press the button
ОтветитьGoing to do this soon, but my lock acuators get weak around 2-3 tries so I’ll fix that before I program a new key. Im tired of locking my passenger door by hand lmao
ОтветитьI have a 2000 model lexus es300. Is there any tricks or hacks because i removed some fuses to check if they were blown and the battery kept draining dead in like 2 mins after the car was off and now it won't do shit when i try to crank it. It does nothing. ANY SUGGESTIONS WOULD BE GREATLY APPRECIATED
ОтветитьI did exactly what you said and completed the cycle and with the confirmation that the remote has been programmed and everything but my remote still doesn’t work. Any other suggestions you can give me? Appreciate it!!!
ОтветитьBut will this also work on a 2004 ES 330? All remotes online say that locksmith needed to program key and fob
ОтветитьGracias por el video ya lo programe me solo bloque las puertas estando dentro y afuera no hace nada
ОтветитьWill this work for my Camry 2008?
ОтветитьIdk what im doing wrong because it doesn't work with my gs300
ОтветитьDoesn’t work on my 2006 RX 330. Any ideas?
ОтветитьMy original key remote was working fine until I replaced my dead battery. I can't get my remote to work after new battery was installed. Any suggestions? I've a 2005 Lexus ES330.
ОтветитьI would have to change my door actuator cuz my lock doesn’t work on my passenger side would that stop me ?
ОтветитьGoood my friend ❤❤
ОтветитьI get my locks to cycle when I try to get my fob programmed but pressing the buttons on fob doesn't do anything. Thoughts?
ОтветитьWill this work with a 97 ls400
ОтветитьIf i have the second key and i try to reprogramme the new key - it doesn't work...
ОтветитьI try everything you say do in the video but I can’t get the chip to program for the door lock can you help
ОтветитьFor unknown reasons (batteries in each remote entry key measure 3.05V), the programming steps succeed for both keys, but then after a few cycles of lock/unlock with the remote the next lock action disables both keys, and the driver's door has to be opened manually with the key--WHICH SETS OFF THE SECURITY ALARM until the key is inserted and turned to ON. Neither key will lock or unlock the doors.
Have any idea why the keys "forget" the programming (or the ECU does)?
everything i do is exactly like in the video but when i close the door to get out of programming mode and test it out, it doesn’t work
ОтветитьHey awesome video, do you think this would on a 2005 Lexus ES330, I know the pedal dance stopped working after some model years
ОтветитьI started with a virginized IC900 (as per your immobilizer hack video) and it was able to program the first key, but using this pedal dance here was unsuccessful. Any help would be appreciated. Btw, it's an 03 RX 300
ОтветитьDoes not work in 2009 Lexus RX350.
ОтветитьOn my GS2 the programming didn‘t work although the programming was confirmed by the computer with cycling the lock once. By „accident“ i used the key on the drivers door to cycle all windows down and up. After this procedure the remote was recognized by the computer and everything works fine now… Strange, but maybe a solution for some!
ОтветитьWill this work for a 2000 Lexus es300
Ответитьdoes the remote lock/unlock procedure work on a 2007 Lexus RX350?
ОтветитьDidn't work on 2006 RX400h
ОтветитьIt would be great if you could do one of these on a 93SC 400 with factory keys. I lost one of the original keys found it replaced the battery, but it still does not lock or unlock the doors. Can you help?
ОтветитьNot working
All I have is working spare key without remote function to start . Does that make difference?
Will this work if the master keys electronics are all broken. Can I use the master key with just the key?
ОтветитьI have a key that starts the car and works on all locks (doors, glovebox, trunk) but cannot get the remote to work no matter what I do. 2001 es300. I can get it into programming mode but it won't complete the process. Im thinking the max amount of keys might be at capacity ? Doing the on off with the key 2 times instead of one is supposed to program a new and erase all old but that won't work for me either. HELPPPP!!!
ОтветитьDoes this programming method work on a 2009 lexus rx350?
ОтветитьWill this work for and is250 2006 with smart key fob
ОтветитьAnyone have key code 12BBY-08? I bought the flip key on ebay and realized its a different key code like HYQ1512V - 4C or something and doesn't work with my GS400 even though it is the same shape as the remote. Couldn't program it at all
Ответитьdoes this work if my master key does t he same thing as my unprogrammed jey
Ответить