Комментарии:
What’s the skil tool that was used to sand the handle?
ОтветитьBeutiful handle locust is a very hardwood not easy to work with hand tools amazing results ❤ 😊
ОтветитьAbsolutely fantastic, only draw back is it was almost too lovely to use.
ОтветитьVery nice work on the hammer head. I like locust for ball pein handles but I have always made mine from green wood on the shavehorse using a drawknife. I learned from a third gen handle carver who had extraordinary skills. I watched him make one of these for me one day - from start to finish it took him 6 minutes. When he handed it to me all I had to do was let it season then hand sand and oil. I made some myself but it was always a challenge to get a nice oval shape that was comfortable in the hand. This was especially important if I wanted to used the tool for forge work on my anvil. I finally got his seal of approval but it took a lot of shavings to get there. Now I use a pnuematic drum sander with 4 grits for the sanding and I oil with walnut oil. It dries to a hard water resistant finish very quickly and isn't sticky. Overall - nice job and what a beautiful shop!
ОтветитьI made my handle out of ⅛ “ plywood. It only worked for one swing
ОтветитьOnly the army buys $80 hammers and $200 toilet seats.
ОтветитьI have 1 actual problem with this handle and it is polishing it. Something like this is very likely to slip out of the hand. I work quite much with hammers so I know. For finish I would sand to 120-150 grit and use boiled linseed oil. Nice hammer nonetheless.
ОтветитьThe handle is perfect, very fine job all around. New long life for this ball peen which will surely be treasured.
Ответить❤🎉
ОтветитьIt's such a beautiful hammer I would look forward to hitting my finger with it.
Ответитьdisappointed you didnt reuse the handle. LOL
ОтветитьAm I the only one that just wants to watch, not read? Reading is a distraction from the relaxing aspect of these clips.
ОтветитьFrom junk to junk , waste
ОтветитьIt is just a hammer, 1000's of them.. To much drama for a hammer
ОтветитьAmazing Restoration! One thing is for sure you will not find that handle in a store anywhere on earth. 👍👍
ОтветитьAre those machines brand new 😳..otherwise you are ocd pro max
Ответить😁👍🏼
ОтветитьYour wood... In my hands? I don't think my girlfriend would be cool with that. I'll have to pass. LOL
Ответить$80 ? It’s a hammer, no different than one in any hardware store. Give me a break!
ОтветитьDoes that liquid bluing work on a rusted gun barrel? And where can I find it
Ответить👍👍
ОтветитьTalk in your videos.
ОтветитьIt's amazing how one can turn a $5 hammer into an $80 hammer with only $5 in materials and $70 in labor. 😂 Good thing yt pays so well, because that "$80 hammer" that cost about $80 to make is already worth $1,000+ in ad revenue by now
ОтветитьFor all that time and effort I could have bought this for $20 bucks at my local hardware store 😂
ОтветитьNot sure where you buy your tools ….. but 80.00 for a ball peen hammer…. Tell you what I have a rock I found in my driveway…. It’s your for 2,000.00 ….😂😂😂😂
ОтветитьI have a ball peen hammer with a broken handle. I need to replace it. Maybe I’ll restore it like this one.
Ответитьin my barrio the new wood is $4 USD , saving time, effort,
polish the hammer heard is easy and so: kick my anus (or intriduce it through)
Thank you for not using filler on the metal rust holes. I hate it when they do that. There's no way to fix metal once it's eaten away by rust, unless you do a deep grinding or melt the whole thing and recast, which probably wouldn't make too much sense.
ОтветитьYou are a Master at restoration Man ! Fascinating to watch, thanks for sharing !
ОтветитьThe best
ОтветитьI just got an old Ball Peen hammer from an estate sale, in about the same shape. Cheers
ОтветитьThe attachment makes the work TWICE AS EASY, not half as easy.
ОтветитьYup still works like it did before!
Ответить2 Pound hammer
ОтветитьLooks great, but that claw hammers are for knocking in nails, this hammer is for riveting metal work, the ball end rounds the other end of the rivet.
ОтветитьAround the 6 minute mark, I think you mean to say the Attachment makes the work twice as easy, or half as hard !
ОтветитьYes. De-pitting the chewed up metal would be too much. Easier to just 'like how it looks'.
Ответить"Half as easy?" Do you mean , "half as hard instead?" LOL
Ответить“Half as easy” implies the attachment makes the job more difficult. I think you meant to say “half as difficult” which would imply you cut the difficulty in half, thus making it easier.
ОтветитьI really don't understand why people restore simple tools to this extent in many ways but it still made me watch till the end so I guess it worked 🤣
Ответитьthat was my dads hammer we lost it in 64 while building a pigeon coop just outside Glasgow well it looks like it! really it does lol turned out real nice in the end well done
ОтветитьBeautiful hammer!!!!
Ответить80 bucks for a little chunk of iron? It's an old chunk of iron? Hmmm.
ОтветитьVery nice work.99.9% of people would have gone to Home Depot for a new handle. The same percentage would have tossed it in the scrap bin to begin with.
ОтветитьNice job,
If you’d like a tip never do gloves and rotating parts.
Blink and your fingers will be gone?
Are your fingers stronger than all that rubber wound into a cable? Who knows.
Really satisfying. High quality job.
ОтветитьIt were only left out side for an hour in Scotland 😂😂
ОтветитьI love these videos. Someone restoring and saving old pieces of history. Thank you.
ОтветитьStunning job Mr Cool.
Ответить