Voron 2.4 5:20 speed Benchy

Voron 2.4 5:20 speed Benchy

Josh Murrah

3 года назад

514,203 Просмотров

Ссылки и html тэги не поддерживаются


Комментарии:

@josephboen178
@josephboen178 - 22.01.2024 07:18

What hotend is this?

Ответить
@petersilva4242
@petersilva4242 - 21.01.2024 14:42

Very cool.I'm just about to put a 2.4 together myself,any mods, upgrade parts or advice you would give also.what is the name of the hotend and how's it perform on overhang cooling in normal printing conditions.cheers mate

Ответить
@tl1921
@tl1921 - 16.01.2024 02:55

I literally laughed out loud when it started

Ответить
@Armor3dprinting
@Armor3dprinting - 15.01.2024 07:52

You're running the sherpa mini on this? What stepper motor on it?

Ответить
@silver_dart23
@silver_dart23 - 22.12.2023 02:30

All sickly obsessed with speed and wanting to get a boring benchi in 10 minutes. Once again it has been proven, quality and speed do not go together.

Ответить
@NewfieMeltdown
@NewfieMeltdown - 18.12.2023 00:16

Is it just me, or did I see smoke come off the smoke stack of the benchy when the tool head moved away??

Ответить
@MichaelJeffers75
@MichaelJeffers75 - 17.12.2023 17:52

Do you know what grade alloy your extrusions are? I'm trying to source extrusions for my 2.4 build, but that info isn't always readily available and I'd like to have a good benchmark.

Ответить
@osthyvel100
@osthyvel100 - 30.11.2023 22:16

Hello great video! Where can i find the stl for those nozzle fan ducts? :D

Ответить
@daniilolenev4593
@daniilolenev4593 - 04.10.2023 21:13

фигурное дристание пластиком)

Ответить
@adrianosilvamontadordemove4394
@adrianosilvamontadordemove4394 - 21.09.2023 04:05

Does high speed heat the engine?

Ответить
@elgrefa
@elgrefa - 08.09.2023 20:57

Next time try to put the phone in the middle, to see even less

Ответить
@JSPHism
@JSPHism - 01.09.2023 08:15

That looks like my first print on my Annet a8

Ответить
@ProjectMoonshot
@ProjectMoonshot - 24.08.2023 09:04

What color is this? I love it! Its absolutely insane!

Ответить
@AaronWoodburn
@AaronWoodburn - 02.07.2023 01:07

be nice if we could see the entire actual print happening...

Ответить
@1neAdam12
@1neAdam12 - 28.06.2023 20:17

All that, for an Everlasting Gobstopper?

Ответить
@robinjitsingh3733
@robinjitsingh3733 - 11.06.2023 08:08

Pretty good at this insane speed really good 👍

Ответить
@steveu235
@steveu235 - 24.05.2023 15:09

What is the point of all this speed when your results are just crap,

Ответить
@Stefdlbrck
@Stefdlbrck - 22.05.2023 13:25

🤮

Ответить
@OlegMalykin
@OlegMalykin - 09.05.2023 20:57

for what?????????????

Ответить
@gennadysmirnov5362
@gennadysmirnov5362 - 06.05.2023 11:52

Wow

Ответить
@grathado28
@grathado28 - 03.05.2023 11:31

This video is the I built a voron 2.4

Ответить
@DougieeeTripDrip
@DougieeeTripDrip - 01.05.2023 02:57

You can see the smoke come off the smoke stack

Ответить
@maciejprus407
@maciejprus407 - 25.04.2023 17:29

Maciek wake up and return to your Ender 😅

Ответить
@ChargedPulsar
@ChargedPulsar - 23.04.2023 22:46

Print looks like a mess, what are you measuring exactly? How fast you can break the machine by outputting garbage mass?

Ответить
@burgerman7160
@burgerman7160 - 19.04.2023 15:53

The speed of tilt and bed mesh is more surprising. Can you share the speed settings?
If you have a github link, can you share it?

Ответить
@Span2Four
@Span2Four - 15.04.2023 22:30

Its kinda like a Harley! Tighten all fasteners between trips or its gonna rattle itsself apart! VERY COOL!

Ответить
@angeloctaviocruzmartinez345
@angeloctaviocruzmartinez345 - 09.04.2023 01:46

this is a bbt v1.0 12864 ???

Ответить
@yoyofargo
@yoyofargo - 30.03.2023 12:04

I wonder if you got rid of the fans, added a silicone aquarium airline tube and a custom shroud for the printhead, hooked the tube up to a shop vac on the blower side, or a squirrelcage floor drying fan. That way it's not manual, and integrated into the design of the printer. though at that point you might need to slap heat sinks onto your steppers.

Ответить
@subhradeepsharma
@subhradeepsharma - 04.03.2023 14:29

WTF

Ответить
@arikm8430
@arikm8430 - 23.02.2023 07:21

I love the purple! What a cool printer

Ответить
@groonworld3921
@groonworld3921 - 22.02.2023 16:19

Wow, that is incredible.
Have you thought about doing more to dampen vibrations? Attaching some dead weight might really help, either covering the extrusions and filling them with sand, or just placing the whole Voron on a big slap of concrete with rubber feet underneath that. I'm sure there's more possibilities than that, too. Deadening the vibrations might help a little with the insane accellerations you're running.

Anyway this is super impressive, thanks for sharing!

Ответить
@paperfoldschannel607
@paperfoldschannel607 - 26.01.2023 16:40

my one curiosity is how it extrudes that fast

Ответить
@paperfoldschannel607
@paperfoldschannel607 - 26.01.2023 16:39

AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA SHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAAAAAAAKKKKKKKKKKKKEEEEEEEEEEEEEEE

Ответить
@shadowlordalpha
@shadowlordalpha - 23.01.2023 12:39

For cooling mounted on the sides as long as it says with computer standard (which I don't believe most currently do) I think its fine as those are decently standard parts

Ответить
@clashofclanswithbrian8822
@clashofclanswithbrian8822 - 22.01.2023 19:51

Bruh how is that possible

Ответить
@pasplusvite
@pasplusvite - 21.01.2023 15:02

c'est d'un ridicule !
it's utterly ridiculous !, it's a farce !

Ответить
@stereoturk7986
@stereoturk7986 - 17.01.2023 19:29

nice positioning from your phone dude loool

Ответить
@RoteFahne_
@RoteFahne_ - 16.01.2023 20:09

This Benchy is an absolute mess. What is the reason for those pseudo "high speed" tests?

Ответить
@JohnJerde
@JohnJerde - 12.01.2023 22:54

How would someone go about making this same kit. Anyone have a link? TIA

Ответить
@SebaGT
@SebaGT - 08.01.2023 19:43

The phone between printed part and camera…..what an idiot

Ответить
@Flumphinator
@Flumphinator - 31.12.2022 00:53

My first printer was made of plywood.

Can’t wait for my parts kit.

Ответить
@noway8233
@noway8233 - 22.12.2022 16:03

Try to do in my Cr10 ...and the house start 'the Mambo"

Ответить
@noway8233
@noway8233 - 22.12.2022 15:58

420mm/s , very nice , i kmpress about the acceleratios , maybe 15.000 mm/s2 ? Ah, that cooling setup is like the petsfang , its very good

Ответить
@TheJacklwilliams
@TheJacklwilliams - 21.12.2022 00:22

I cannot hear you, above the noise. You need to mic up, and talk over it, or? Lay the audio track over it and mute the machine/room audio.

Ответить
@isozero7265
@isozero7265 - 20.12.2022 17:29

Not too shabby?????????🤣

Ответить
@fisheye3d1727
@fisheye3d1727 - 18.12.2022 08:45

Where did you get the rasp pi camera mount?

Ответить
@kittrelleberwine
@kittrelleberwine - 04.12.2022 23:48

Where did you get the purple frame? I really like that shade

Ответить
@nio731
@nio731 - 30.11.2022 06:28

Whaaatt the shit thats AMAZING

Ответить
@flaviobr1576
@flaviobr1576 - 30.11.2022 03:53

My shit comes out faster than this piece, and it looks prettier.

Ответить
@jawzpaintball2021
@jawzpaintball2021 - 26.11.2022 00:14

Is this video fast forwarded?

Ответить