Комментарии:
love all your tips and tricks. I am a newbie but learning fast thanks to you. Thanks Jim in Texas
ОтветитьI just noticed you have the eyes of Nicolas Cage
ОтветитьYeah Sly Stallone is into 3D printing now ! Nice 😆❤❤❤
ОтветитьЭто примитивно.Разве что только абсолютно незнакомый с Cura человек этого не знает.
ОтветитьI believe that if you take the original one and use that settings block in the insides and lower the quality of that specific area, you'd get a similiar result
Ответить0.6 Nozzle will bring it down to just over 3 hour and since there are no over hangs or to bigger curves 0.32 layer height is a good multiple for a 0.6 nozzle add 0.62 to line width and you be surprised on print quality
ОтветитьIt boggles the mind
ОтветитьLove the slicer hacks!
Ответить3 hours to print, 1 hour to edit, and not the design wanted.
Seems like you could have just cranked up exterior wall speed for the same exact result with no other changes
Wow! I've still got so much to learn about what Cura can do. Didn't even know these settings existed.
Ответитьabsolutely based, fucking love it
ОтветитьHow do u get cost of materials to display in cura
ОтветитьThis is good stuff. I just ordered my 1st 3D printer, a Neptune 3 Pro and been looking at different videos. Definitely going to check out the rest of your videos as am sure it’ll help me learn more about printing.
ОтветитьSeriously pro tips right here.
ОтветитьNot sure why. When I done this, my walls are really weak. Been trying to fix this for a long time and still can’t figure it out… 😢
ОтветитьFantastic video, new to 3d print I have a ender 3 neo, will this profile work on that?
ОтветитьHi! Im new into this 3D community, and i can truly say that your videos really makes it worth watch tutorials! Keep it up !
ОтветитьCan you share stl file of this spool holder please
ОтветитьIma be fr but you look and sound like nicolous cage
ОтветитьVery [ef word] clever mate 😄👍
ОтветитьThat's great but you didn't speed up the original part, this is a different model. It's not really how you can print faster.
ОтветитьTricky 😉😃😃😃
ОтветитьYou could cut the time down even more if you got rid of half the of the redundant bracing that is holding it together
ОтветитьVery smart use of slicer settings and infill pattern.
This trick also simplify the modeling, you save time since you don't need to create the pattern, instead of that you rely on the slicer to do it for you.
Another benefits, you can change the pattern without changing the model, and you can print a closed version.
As said very smart, thank you for sharing.
Earned my subscription! Very 🆒️
ОтветитьOf course, I just started a print that would have significantly reduced the 22 hours its going to take but Now I Know!! Thanks Chuck!
ОтветитьCan you do a video on support blocker using tree support on a certain overhang I don’t know if it’s possible.
ОтветитьSuper triks, very usefull.
ОтветитьWill this work with the Remove All Holes setting as I would like to add infill to a select part of a model.
Ответитьi get a "unable to slice" when i do the overlap setting :(
ОтветитьHey there, I just wanted to let you know turning up extrusion width can be quite useful in designing prints.
With a XX nozzle, you can set it up to XX
0.4, 0.2
0.6, 0.4
0.8, 0.6
Thanks for the awesome video!
Hi Chuck, Love the videos. One question, you have the faster print file for the arm, but I would still have to print the slow version to get the arm holder.
Is there a chance you have just the holder file?
Колдовство какое-то :))))
ОтветитьFirst video I've watched on this channel, and my first thought was "Hey, I didn't knew Stallone was into 3D printing! Cool!"
ОтветитьExcellent tips, thank you. 👍🏻
ОтветитьWhat if you just printed at say 120mm/s speed instead of 60? Would that compromise PLA or PETG ?
ОтветитьHi there I need some help with my ender3 3d printer can you help me please
ОтветитьThank you! I'm slowly getting my head around cura
ОтветитьThanks from Israel! really cool and useful👏👏
ОтветитьThis is only really useful for this specific print...
ОтветитьCould you use the blocker trick to change the interior's quality settings on the original "outer skin only" version instead?
Ответить9 hours is considered a long print? My last print took me 3 days. But i prefer quality over speed.
ОтветитьWhy not just make the handle skeletonized completely..remove in lay and make hollow with simpler design w/ borders only for the handle? Newbie question
ОтветитьAbsolutely fantastic. Thanks. Now all I have to do is remember all the tricks! Having thoroughly learned Prusa slicer I'm going to change back to Cura 5!
ОтветитьThis is awesome......
Never thought about tricking the inner design to be infill. Genius dude.
I just got an ender 3 and would love to see ypur settings. I know all printers are different but would love a nice set of settings to go off of and tweak a bit
ОтветитьCan you show use your cura settings for the ender 3?
ОтветитьIf printing was as simple as clicking print, i can see this technology becoming more widespread. Unfortunately, printing anything successfully takes a lot more than just clicking print.
ОтветитьGreat tips, cura is really powerful tool
ОтветитьGreat! Thank you
Ответить