Комментарии:
Tip for soldering caps: you can scratch the middle pad between the TOKIN solder pads and have the negative pad soldered onto there. I did that on a CECHC04 just recently. (and before anyone jumps to scold me - I have had pulled the syscon log - 1001 and 1002s only.)
ОтветитьEsses capacitores de tantalo sao de quantos uf e volts?
ОтветитьVery interesting repair.
You mentioned the RRD of the 360. Did you ever fix one and find out exactly what the issue was? I have a 360 that was repaired by MS and after about 6 months it returned. But not fully. After getting the RRD, again I shut down and restarted and it kept going. But I Kinda gave up and got an Xbox One. So haven't used the 360 since. Just wondering your opinion and findings. Thanks 👍
I know this is 2 years ago but I need this work done!
ОтветитьAwesome work. Even the system is working better than before
ОтветитьI got mine scratch free. How lucky am I?
ОтветитьHow long has this fix lasted? Curious to know 👍
ОтветитьGreat to see a YLOD PS3 good as new. I'm still scarred from it happening to me back in the day. I remember playing Lost Planet 2 when it first came out, when all of a sudden "black screen blinking yellow light" during an online match out of nowhere. I had the launch model with BC for PS2.
ОтветитьGarbage star heads
ОтветитьWhat solder tip did you use to remove the terminal from the pad?
ОтветитьCan you give some tips on how to desolder the terminals? I don’t want to use a heat gun and wicking only worked for one of my terminals. For the life of me I can’t get the other terminals to stick to the wick. I also don’t have a thin solder tip to slice it off like you did
ОтветитьPlease Help....I have a ps3 Fat backwards cap. that works but crashes when playing large games. I'm desperately looking for someone that knows how to repair this issue anywhere in the US. please please help
ОтветитьThanks for the tutorial.
My PS3 just turned yellow light of death.
my ps3 has no scratches but it has the yellow light of death..
ОтветитьWould you fix mine for me
Ответитьawesome! thank you!
Ответитьi have same problem with that one screw thats not coming out. can i just use cooking oil?
ОтветитьGood job man! I'm doing this Fix actually in mine! But, it's really hard job to take the noken/tokin caps. I watched that It can works easy with a wood chisel😅 i realized after get a mess with my Mainboard hahaha. I tried to get off with a knife so it's a bad idea. Micro caps and a voltage regulator flew away😅
ОтветитьOn my PS3, I removed the motherboard and any attached plastic. Placed in oven to reflow solder. Our machine solder was experiencing heat stress fractures from frequent on/off. Repair went well and lasted for weeks. Each subsequent repair lasted about half as long. Found that if you leave the machine ON indefinitely it doesn't experience the heat/cool stresses any longer.
ОтветитьWhat materials did you use? I was planning to fix my ps3 XD
Ответитьi have same model console and same problem, im going to try fix, nice work and great video.
ОтветитьActually this console is one of the newer versions
Ответитьis this fix permanent?
ОтветитьNice. I could do with stripping my PS3 down and giving it a good internal clean before it packs up.
ОтветитьSave data will be deleted?
Ответитьaye, you're playing LittleBigPlanet! what an absolute classic that game is
ОтветитьPlease assist. Need my ps3 slim repaired. I’m in the DC area.
ОтветитьWatched your Lynx II video, a very nice refurb which didn't work since I suspect 9V has already fried the cpu. The algorithim recomended me this video, and I have a PS3 sitting in my connection with this same issue. Might get to it one day. Subscribed. Very nice videos, thanks. I recently got a Lynx II, no power, and wired 5V onto the capacitor and got it to power on. So i've ordered all the components to reburb mine as you did yours.
ОтветитьHi, where can i send u mine??? I love how u take care of them and i love to play mine again
Ответить@BorderlineOCD What liquid did you put on the warranty sticky to prevent damaging it?
ОтветитьHow much you charge to repair those old ps3's?
ОтветитьI remember having to use a blow dryer to get it working again😂
ОтветитьWhere can I get mines fixed?
ОтветитьIm late, but that broken piece is a foot of the disk drive.
ОтветитьI assume this repair would be relatively similar for the CECHB01? I got this model recently and the system will start and play for various periods of time before completely freezing and discoloring the screen
ОтветитьAfter a few years, does the PS3 still work good?
ОтветитьGreat work 👍You could just paint the surface of the cover with Klvierlack.
ОтветитьYES I LOVE IT!
ОтветитьThat exact same screw stripped for me too
ОтветитьYour chuckle after it worked was priceless,no better feeling then a job well done!
ОтветитьWhere did you get the tool you used when removing the seal? What’s it called?
ОтветитьAmazing video very complicated I am scary to open and clean
Nothing about for repair... great 👍👍👍👍
I know this is an older video, and yeah i know 'ThErMaL pAsTe'
I just generally prefer to spread mine on the IHS, especially when there is only 2 mount locations.
Good Job Well Done
ОтветитьIs there a company that can do all this plus more upgrades on my ps3?
ОтветитьWhere are you located sir? I have the original fat ps3 (60 gig) and have this problem. If you live close to me I would pay you to fix it🙏😭
ОтветитьI just picked up a ps3 with the same issue. Could you fix mine?
ОтветитьHad a similar experience with the screw getting stripped. It was actually around the same location lol.
Ответить