How to Make an RTX 3060 Better.

so is it safe to oc vram +1000 for rtx 3060?

Still better then the crap cards amd makes😂

This GPU should have gotten at least 30SMs, if not 32. It has never been a real 60 class, way too slow, rather a 3050 Ti

HOLY SHIT MY PC JUST HAD A SEIZURE SETTING FAN SPEED TO MAX

My 3060 has a factory memory overclock of 15080mhz and ive had it stable up to 18000.

I just got my hands on this card paired with a i5 12600k and seeing what this overclocking stuff is and you was by far the most helpful and im loving this build

Why is your core voltage set to 0

This sounds intriguing. I’ve never overclocked anything before. Is this sort of technique for over-clocking perfectly safe for the GPU and all other computer components? It’s not going to fry the CPU or memory components I hope?

back ground music name?

/\

Just sold my 3060 and got a second hand 3090 for water block conversion

What green plasma plate do you have? Thanks

MSI>>>>>asus

At some point memory oc even if it doesn't presents artifacts it becomes detrimental. It won't show artifacts because of memory corrections but no benefits, usually you even get lower performance. My vram can go above from 1000mhz+ but it's optimal value rests at 360+.

My GPU mhz doesn’t increase when I add +200mhz but my memory does.

bro where did u get that wallpaper I love it

I run heaven benchmark at 200 fps and some parts 280 fps max

overclocking to achieve 10% boost , it is not worth it, better to buy new GPU

where do you get the over clock software?

I dunno bout anyone else but using this card with my I5 12th gen I get no problems on my game and good fps, even on a heavily modded enb Skyrim, 1080p & 1440p above this tho you could receive drops but it’s my favorite card.

What does the memory clock OC helps with? Increases VRam speed?

I run 200/1000 red dead 55fps then overclocked the ram which I forgot to do from 2133 to 3200 ran at 65-75 on ultra settings 1440 ryzen 3600 dlss off and render at 1200 looks beautiful with a little nvidia shading

msi afterburn doesnt let me control fan

I don't trust any supposed tech who looks like a fool in their thumbnail, good luck

gpu fan speed 100% work its good ?

my fan is loud as hell when i turn the fan speed on. should i be worried? lol

I cant oc my rtx 3060 ventus 3x 12g oc by overclocking the mem clock...i can overclock the core clock up to 120mhz (Not more, warzone and other Games are Crashing at 130mhz) and my Games Work fine. As soon as i overclock my mem clock up to 10mhz my Games are crashing immediatly...i cant See any Performance Boost with this 120mhz CC either...

I have a 3060 msi gaming x. But when i change the CORE CLOCK value the gpu Mhz doesnt change a bit. Can anybody help?

How do you run heaven in a smaller screen to be able to adjust afterburner at the same time?

180 - 1100 without problem and also my cpu fan is at 0%
Is that dangerous?

So daunting to listen "point two, point four. ." Just say the main number ffs :D

Wouldn’t there be a difference in the load on the graphics card if you’re playing at full screen since it will have render a much larger image as opposed to just running it in the background?

Good video.

I'm at the opposite side 😅
I have an i7 12700F and an RTX 3060 (Windforce 12Gb OC Dual Fan in case it matters, I'm nor an expert).
But I've heard from a friend that the GPU might be holding back my CPU and it does lol
So how much of an improvement might I get? It's kinda scary for me to start tempering with voltages and overclocking in general (I'm a newcomer to the master race lmao).

What you use for benchmark ?

Hi, which is the model of the case?

Msi Afterburner is now Malware now

SIr ,gr8 video. Can u please reply me , first time i watched ur channel cos jst found out. Im using an i5 10400 and 8gbx2 3200 gig ram which i XMP and goes to 2666mhz...my mobo is only H410M H V2 so its not exactly very high end oe even mid.....I wanna say that i oveclock my 3060 12gb but a little lower than what u said in the video, Also sir , m,y volt never move ,it is 0 all the time even during benchmark,its so long i have to quit the benchmark lol,thot it cant end !!! So what advice can u give me , is my cpu gonna affect my OC ?? and my mobo is so low,its micro atx, barely could fit air cooler CM RGB H410R !!! and mty ram is TFORCE Delta R 3200mhz...i thought 10th gen intel can run 3200mhz.
Please help !!! EDIT : I subbed and liked btw ;) !!!!

Why do I think this damages the card?

got my gigabyte 406 eangle yesterday i oc the card 200 at core and 1000 at memory i am getting 4009 on the same score, i am happy with the oc i loose bit on memory but i get some on core i think silicon lottery wise

+200 +1400 => 2fps in 4K (3060 eagle 12gb), no sense for OC

Does this also apply to the "OC" Cards? Not the TI ones, but for example the MSI 3060 Ventus OC

I have an msi rtx 3060 ventus 2x OC edition with the msi z690 pro A motherboard.
I can't seem to go beyond 100% power limit as the slider in msi afterburner is maxed out at 100%. I tried overclocking +150 on core clock and 1000 on memory clock but it crashes. Can you tell me how to fix the power thing, I even tried putting 110 manually but it doesn't go past 100.

how did you manage to unlock the power consumption ?

Just used msi afterburner put my core clock to +180 mhz
Memory to +1000 mhz
Fans on auto (running at a avg of 57c°)
Settings on LOW
HIT MAX 560FPS
AVG 324 FPS

And running heaven benchmark at

i have a 3060 ti xc and i play warzone and runs at 110-130 fps .... any tips?

finally someone that also tels you the ingame problem havent seen any talk about this not even the biggers tech tubers
this for sure will be a video ill send to people if the need it

damn my 3060 eagle oc cant go over 130 core and 350 memory .-.

mmmm

For benchmarking I preffer Superposition Benchmark (1080p Extreme). I read somewhere (but haven't verified yet) that this overclock would crash on Ray-Tracing: ON (but the video shows the contrary), so we'll have to set the core clock at 100Mhz. For Ray-Tracing benchmark use Bright Memory Benchmark. I pushed mine to 250Mhz core clock, 1485Mhz memory clock. I own a Lenovo RTX 3060 12GB LHR (Lite Hash Rate) OEM