Комментарии:
Thank You for this helpful video!
ОтветитьIs it possible to setup the 'page buttons' to the external foot?
ОтветитьGreat video! I tried to do so, but for some reason only the FS4 is working. Do you know if my patch cable must be stereo to activate both FS? Thank you!
Ответитьtrs cable?
Ответитьabsolutely not for me !!! to complicated shit!!!!!!!!!!!!!!!!!!!
ОтветитьMy Skinny Little Twins just arrived to the US! That didn't take long at all. I plugged it in and immediately wondered, "How did I get along for a year using the HX Stomp without this added functionality." I was basically using the HX like my old M5 that I replaced for one effect at a time. Now, I'm lining up "set lists" using presets and have access to On/Off of three effects at a time. Thank you for creating such a great product that fits right in on my pedalboard!
ОтветитьHi, I bought the skinny little twins dual footswitch and I've followed your instructions. Unfortunately the footswitch on the right doesn't work and I have to press twice on the left footswitch to activate it. Is there anything I can do to solve this issue?
ОтветитьThis video was very helpful. Thank you!!!
ОтветитьQuick question, is this the only external Footswitch that is compatible with the stomp? I need something with more buttons haha
ОтветитьHI there, bought a single mosky tap switch to use as a tuner/tap...is the process the same? I followed the steps but the tuner isn't turning on as expected. I wonder if there's a problem with using ring and tip for the same function? Hmmm...any ideas welcome!
ОтветитьCool video. Can you use any old footswitch pedal? Or does it have to be specific?
ОтветитьCan I use a Mustang MS2 switch with the HX Stomp? I Also have a Boss FS-5U, would it work as well? I am talking about put them independently
ОтветитьWhat’s the difference between soft touch and hard click?
ОтветитьThank you for this! I know I'm adding to a sea of very specific questions as to, "Can I do X/Y/Z?" but I'll venture in anyway. I currently have an Eventide H9 and I have it set up so that a 2-button external footswitch can act as an expression control. It's either 100 or 0, but that works for me with things like pitch whammy. Is this something I can do with the HX Stomp? I don't have room for an expression pedal, but I could sneak a small footswitch on the board if it will control expression parameters. Thank you!
ОтветитьI have a Mosky Dual switch, just followed the instruction and only the right switch works (think FS4). Do you know why?
Ответитьcan you assign a specific mode to a external footswitch? Preset/Stomp, instead of scroll all the mods?
Ответитьhi, can i assign the footswitch for a tuner and to turn on/off one the effects instead of tuner/taptempo ?
ОтветитьHi! Great tutorial! Can the external footswitches be assigned to: 4: Looper Record/Play and 5: Looper Stop/Clear or something somewhat like that? Thanks!
ОтветитьThank you very informative. What kind of cables should i use to connect the footswitch?
ОтветитьGot it.😊
ОтветитьThanks. Thought my new switcher wasn't working properly!
ОтветитьThx great content! I tried that with my old vox vfs2 but it starts to scroll through the preset list instead of going one preset up or one preset down :( any idea? Cheers
ОтветитьHi, i found your video pretty helpful, but i still don't know.
Would this switch HoTone FS-1 Ampero Switch work with the stomp?
I’m interested in switching between snapshots. Can this do that for me or is this just for switching presets?
ОтветитьIs there any way to have this set up with an expression pedal at the same time? At the moment, I've got an expression pedal plugged into the EXP port
Ответитьpossible to use this with the full Helix Floor?
ОтветитьNow my FS-6 works perfect.
Thank you for this video.
Hi..
Can you open the blackplate and take a photo inside for me?i try to make one for my self!
Thanks!
is it possible to use for ax8 ?
Ответитьbought one!
ОтветитьIs it possible to remove tap tempo and set tuner to engage directly when pressing the switch?
ОтветитьDoes the cable connecting the device to the dual footswitch necessarily needs to be a stereo cable so that you can use both switches?
Ответитьdoes this work with Source audio nemesis delay for preset back and forth change? thanks!
ОтветитьThank you : please tell me . Is it possible to change, just Preset on page with footswich ?
ОтветитьCan you do these 2 external footswitches AND an expression pedal?
ОтветитьI set this up with the directions in the video. However, when I press the switch down it starts scrolling through the patches. Can anyone help?
Ответитьgracias, por fin conseguí que funcionara el pedal ; )
ОтветитьThank you for this video! Can you disable the tuner/tap tempo from FS3 and assign it to FS4 or FS5?
ОтветитьMy question is how to know which footswitches will work with the HX Stomp. I already tried 2 different ones in which only one switch ends up being assignable. A lot of footswitches sold online don’t tell you if it will work with the HX
ОтветитьIf I use this and an expression pedal will one of the footswitches still work?
ОтветитьHwy man, if I was to use a switcher with 3 switches on it, would it cost up fs 4, 5, and 6? Or does it only take two switches?
ОтветитьHi Vein-Tap! What's the difference between normally open and normally closed? And what's the right one for the HX Stomp?
ОтветитьIs there any lag when changing preset? Like any jumps in audio?
ОтветитьGreat! Does the volume turn down when you change the preset/bank?
Ответить