WHY THERE IS OIL IN SPARK PLUG WELL, ENGINE MISFIRE FIX

عزیزمن فارسی صحبت کن

Very helpful thank you it is my exact problem

I did exactly, as u said in the video but did not work

Slow down talking can’t hardly understand you with your accent

understanding his spoken English is nearly impossible...

Better to place a rag over spark plug well and blow-out with compressed air before removing spark plugs.

I always heard a tiny bit of brake clean before you start taking out the plug will help, and then when you get the plug out you do a very quick spray, not to soak but to go with the left over leaked oil to prevent it from filming so that it burns off more easily.

I need that video on ford fiesta

Sweet! I've done this before on my old car, but that was just because I needed to change the intake gasket and I got an entire gasket set. This time my wife's car's got a ton of oil in the plug well

Never good start when you see the engine pulled

Really well explained

Thank you! Nothing I saw about this made any sense because the the tube and the coil is dry. Tube has a seal around it and coil seal is tight. I’ll drive til this sucker until it blows.

Thank you

I used a syringe with a small tube attached got most of it.

Thankyou , auto repair guys good information 👍

1 minute before you even get to business

Oh man I've been watching diy vids for this problem n all of them were copies of each other... And didn't actually do the show n tell... I mean you say what u r going to do, you do what u said WHILE explaining as you SHOW the steps, that was the best and most informative diy on Utube...

Oh my goodness using a turkey baster to take the oil out of the spark plug compartment was genius...

Thanks a lot!+!

Had the same problem with my Mazda Cx7. Thought it was my spark plug gaskets, ended up being a cracked valve cover 😂

GUYS, GUYS, GUYS...🎼🎶🎵it's raining men😂

I have a garbage vauxhall corsa and one of the spark plug Wells after time always fills with oil. Also how can oil travel down the plug if its airtight.

mine doesnt have that much oil, it was likje a small amount in-between the threads of the plug

I spilled oil by accident and the well while adding oil will that cause damage

I spilled oil in my the well while adding oil to my engine

is normal for 2nd and 3rd spark plug passage to be open? 1st spark plug and 4th spark plug has their own area but 2 and 3 has nothing seperating them under head cover

too much crappy engineering and useless junk plastic parts being used on engines nowdays ! im surprised these fools arent trying to use plastic head gaskets

nice

Easay and effective! Very well done!

I have a question

Thanks for the info

I'm new to DIY. I stupidly removed the spark lugs and oil that had collected up in the spark plug well leaked into the pistons. How can I get it out??

Guys my Honda CRV 05 has been doing hard start for a while now. It is always hard to start it when cool until I burn the plug and insert back before it starts

When an auto place does the valve cover gasket do they change those plug gaskets??

Terrible. Cannot understand you. You speak way to fast and have a pronounce accent. Very bad.

What if I put new ones but still getting oil inside? Is 2009 chevy traverse

Changed my sparkplugs & fuel filter & one the cylinders had bunch of oil , & not only that my rpms r super low …idk if it was affecting the rpms from being so low or something

Great video. Very informative and straightforward. Thank you so much!

Super easy instruction!

In other words I'm fucked

Spawk pwogs 🤣🤣🤣

Helpful indeed my car has oil in spark plug number 2

Thanks, straight to the point and helpful.

Could I get some contact information of the workshop in the video? I have pinging sound from my Elantra and also oil traces in the plug. I am in San Diego

Hi sir.after i took the spark plug, I just found out the oil in my spark plug,. I dont have gasket valve to replace right away. Can i still put the spark plug back to its hole? Even i did not fix it?

It's not always the gasket, some models are known to leak where the tubes are pressed into the head.

Great video I love how you show the work rather than just talking