Комментарии:
Good product and good services
Ответитьevery single time I take the whole tire off like a dumbass.
ОтветитьHave had TWO brand new inner tubes get holes in them immediately after being replaced. I checked for anything sharp. I installed new wheel liner so the spokes wouldn't poke through. The tire says 26 X 2 so that's the size tube I bought, but it seemed way too big. Is that the problem? I don't have to use tire levers. The tire goes in easy.
ОтветитьThx
ОтветитьThat helps a lot thank you
ОтветитьI dread changing my rear tire but this video made it the easiest rear tire change ever! I’m still in disbelief!! Thanks!
ОтветитьCan you put the inner tube back in without a leaver?
ОтветитьI don’t have a tire lever
ОтветитьThanks for sparing us the 30 seconds of hard-driving bass that everyone else puts at the beginning of their overly long videos 👍
ОтветитьThank you, great vid
ОтветитьAwesome. Helped a lot thanks
ОтветитьThank you. It’s the best video I’ve come across. It helped a great deal.
ОтветитьI have had real problems fitting a new inner tube on my back wheel,the first issue I had was getting the old tube out as my tyre is really sturdy(not really flimsy like you're in the video)..the second issue is I keep pinching the tube when I re-insert(I am using the slime filled tubes),as I say my tyre is very hard to manipulate as it is very rigid(are the more costly tyres easier to handle?....or it might just be me!!
ОтветитьSpot on with tutorial, good point to add little air to new tube when installing
ОтветитьIf you don't have tyre levers and you're at home i always use two teaspoons, if that helps anyone 😂
ОтветитьKaton 999
ОтветитьEdit: the rim tool saved my thumbs
ОтветитьGreat video, made it so much easier to do!
ОтветитьThat last tip on pushing the stretch to the bottom - gold!
ОтветитьI fought my tire for an hour. Watched your video. Did both tire if 10 minutes. Tks
ОтветитьI love it that he starts with how to get the tire off the bike first! Most of the videos i have watched, preparing myself to change my innertube, start with the tire off the bike, that is not helpful!
ОтветитьI can't get the front tire on because the brakes are to tight. How do you loosen the brakes or move them until you get the tire on?
ОтветитьI did not used the ziptie but I used a hairdryer to soften the marathon tire and it actually work. I hope i did not pinch the tube though for the 2nd time. finger crossed
ОтветитьBest video to see up close, simple step by step with labelled sections of how to do for both front and back wheel. I couldn’t have done it without ypu
ОтветитьThe valve must be SLOTTED IN the Tyre 👍🍏🐐
Ответитьim on bikes since 1993 and still theres always something to learn 😅
ОтветитьIts tire not tyre
ОтветитьI'm almost 40yo and I just learned that the UK spells tire with a "y". Crazy.
ОтветитьIm replacing my inner tube in the morning before work after i called work and they said that everything is cancelled and i need to fix it 💀
Ответитьwatching this as I spent my last bit of energy going to decathlon, only to find out that their mechanic is not on duty. Now I'm replacing my inner tube at their parking lot as I'm not allowed to do it inside the bldg due to "insurance and safety" reasons. Thanks for this video! lifesaver!
p.s it's-5 C outside
Thanks
ОтветитьA New Life
ОтветитьDEFINITELY check the tire for objects after a puncture! I didn’t know to do this and I had THREE back-to-back flats on my Ironman. Oopsie lol.
ОтветитьFit tube 1.5 for cover 1.6?
ОтветитьAlways cool to get bicycle tips from Eddie Redmayne.
ОтветитьI really want to thank you for saying about checking the inside of the tyre. I kept having my inner tube go down and I couldn't work out what the problem was. I just checked the inside of the tyre, and there was a splinter of glass stuck to the inside of the tyre. It kept repuncturing where I kept patching!
ОтветитьThis video skips out how to put the type back on 🙄
ОтветитьSweet video. I needed this for a road bike im fixing up.
ОтветитьI rewatch this video approximately every 3 years.
ОтветитьOk I did it.
ОтветитьEvery step of this process is an absolute pain in the ass. Fuck!
ОтветитьChrist this is an ordeal. Someone really to come up with a better solution.
ОтветитьGetting the tire lever under the bead (or whatever you said) seems mechanically impossible. Do it for me.
ОтветитьEverything about a bicycle seems superbly designed until you have to take a goddamn tire off
ОтветитьI’ve had 2 punctures recently and they were both the back tyre. What a nightmare
Ответитьif only it was that easy to get the last bit in!!!
ОтветитьWhat size are the tires?
ОтветитьThis helped me so much I used to tell my dad to do my flats now I did it my self this video helped
ОтветитьW video
Ответить