Комментарии:
Is this powered by wifi or a sim card?
ОтветитьIs anyone able to test it while on the move?
ОтветитьHi have USB GPS/GLONASS U-Blox-7 connetced to rspbetrry pi which is battery powered. I am running "gpsmon -n" and redirecting to an output file. The file is getting new timestamp while I raom outside with Raspebrry Pi but it still get the same Longitude and latitude value. Any idea why it is not updating the locations?
ОтветитьThis is great !!! Thank you
ОтветитьThanks for the helpful tutorial. By the way, I don't know why "sudo apt-get install gpsd gpsd-clients python-gps" is not working on my raspi ... please help me
Ответитьhow can I do autonomous robot with gps and raspberry pi and mapping the path??
ОтветитьHi , the main sudo apt-get install is not installing ....any changes
ОтветитьDo you build custom raspberry pi builds for customers
ОтветитьDoes this work on the pi zero
ОтветитьHey, I am using a Quectel L89 EVB with a raspberrypi 3B. Have made the connections using USB. Raspberry pi identifies the connection at ttyUSB0. Have followed multiple methods to setup gpsd but none seem to show any result at gpsmon or cgps. please suggest something!
ОтветитьI am getting a lot of error messages and "failed to fetch" items when I run apt-get install gpsd... command. Any idea what I am doing wrong on this.
Ответитьthanks1
ОтветитьIs Internet Required to get this to work?
ОтветитьHow to dox yourself 101
ОтветитьSo is this data now usable by map software like google maps? Or does it just spit out the data for you to do your thing with?
ОтветитьDon't works for me... When I call gpsmon on terminal the latitude and longitude are not displayed, but the socket events are running.
Does anyone have any idea what it might be?
do pi need internet connection
ОтветитьNow everyone knows where you live :D
ОтветитьHow did you get your gps stuff to look so nice and clean in the terminal mine is ugly and keeps blinking Thanks
ОтветитьNice job. Thank you. Any USB GPS device will work with this method? I will use LineageOS 17.1 on Raspberry Pi 4B to car usage.
Ответитьtry and keeps your hands in the shot
Ответитьwill the gps coordinates automatically change as you shift the raspberry pi?
ОтветитьHi how can i get the speed of the gps? I cant find repositories or the comands to do it
ОтветитьHow do I jamm car tracker gps?
ОтветитьHow do I extract the location coordinates and use it in my python code?
ОтветитьShow in part 2 how to record a track.
Part 3 how to create Waypoints.
Thanks
I'd suggest changing the title of the video. I just tried this procedure on the Raspberry Pi 4. It may be worth removing the Raspberry Pi version number (or changing it to 3/4) so that people running the 4 also know that this will work for them.
ОтветитьHow about dmesg and lsusb to find the new device?
ОтветитьBeautifully clear, thank you.
ОтветитьThanks for the helpful tutorial. By the way, it's not the number of decimal places in the coordinates that caused the inaccuracy in locating your address. Six decimal places of a degree is enough to locate you within just over four inches for latitude and even better for longitude (unless you're at the equator, when it's the same.)
ОтветитьThank you for the helpful tutorial
ОтветитьWhat is the name of the gpsd hardware? And where can i buy it?
ОтветитьThank you very much as it helped a lot. once again saying thanks from 46 21' 35.715" -79 19' 27.040" or close hahaha Take Care
ОтветитьWould a Globalsat BU-353S4 USB receiver with a SiRF Star IV chip work? I’ve looked on Stack Exchange and it seems to work very well according to the posts I found.
ОтветитьI'm having trouble with setting up mines. When I try to put in the vim line command it keeps telling me command not found what do I need to do in order for it to run.
ОтветитьSo far so good
Ответитьi got a lil further than last time the video actualy worked for me this time last time i think i tried to rush through it tytytytyty
ОтветитьThanks, I stumbled on this video after about 3 hrs of fooling with this from the failed OH8STN/G4WNC tutorials. The changing of the local ip to 0s and then rebinding it to the USB0 port. The other two tutorial are stuck on ACM0, and did not address the need for rebinding the socket. Boy was I happy when I finally ran gpsmon and saw output... For i = 1 to 1000 print "Thank You Macgyver" Next i All the best Dick wb7ond
ОтветитьWhich model of gps is used?
Ответитьall i get is command not found
ОтветитьDoes this work on the model 2 b+
ОтветитьI'd like to find a way to setup a Text plan using a SIM card so I can grab the NEMA codes and text them every hour that the unit is turned on. Ideas on how to work both?
ОтветитьGreat video! Is there a way to pipe the GPS data into a log file stored in var/log directory. I am intending to send those data to a central monitoring system (i.e. Splunk) for GeoLocation.
ОтветитьThank you!I am using waveshare l76x multi gps hat in rpi 3 b+, but you helped me a lot.Thank you again.Well deserved subscription and like!Thank you!
Ответитьstupid question: how did you change the background in the terminal window. 73 VA2SOB - Claude
Ответить"~ $ dmesg" will also do the job instead of typing "ll"
ОтветитьWill it work with neo 6m gps?
Ответить