The Best Microscope Camera for Board Level Repairs. How To Sync & Setup Your Mechanic DX-4k

If you used a 0.5x barrow lens, then you need to use a 0.5x adapter. Otherwise, you will get a black circle ring around the image.

I have kaise ks37045d MS with 0.5x extra lens.....
Will this MS camera be suitable for me ???

Would I be able to use this camera with my current c-mount lenses with my setup like Northridgefix uses? -basically just microscope camera to display.

No way? Those price is $139 dollars. How you like it?

Those price is perfect starter for me to learning do repair those iPhone, ipad etc like your job that I am motivation will wanting order those camera that you show this video.. i can’t wait buy one of those on next month when I get my check.. I am patient and I just already ordered one of your hoodie black shirt. It will shipping here at my hometown kenai Alaska next week.. I can’t wait wear it and enjoy with your cool logo, awesome, I am drooling want buy one of this camera, hurry next Month i am buying those 💯 same as this price I can afford. I am not rich guy now lol anyway thank for video.

Hey Jesse I have other question about camera like this and other one is call… let me google. BRB lol

Oh I need buy microscope first then those digital camera for 2nd backup lens

honestly, its not bad at all

can it be pluged in laptop hdmi port or am supposed to buy that converter

Thank you Jesse that was great zooming in and out and staying focused. Great trick 👌🏻

All these chinese cameras with different housing and Different names. They have all the same insides 😂

Please can I use the camera alone without attaching it to a microscope?

I love this one too, thanks for the recommendation!

Hello idol can you make a video of that poralizer scope light .By comparing other ring light , how to install etc., please idol😢😢😢🙏🙏❤❤

Your description of setting up parfocal was confusing to me. On my AmScope, there are lines either painted, etched or printed on the eyepiece tubes that denote the “zero” position. This is the procedure I followed: Step 1 - Twist each eyepiece out (lengthen it) until that “zero” line on its tube is just barely visible. Step 2 - Set zoom to maximum. Step 3 - Adjust objective lens height (large knob, or stand adjustment) until image is clear in one eyepiece. Step 4 - Adjust other eyepiece until both eyes are in focus. Step 5 - Set zoom to minimum. Step 6 - Readjust the eyepieces until focused again. Step 7 - Verify that the eyepieces remain in focus throughout the zoom range (may need slight readjustment of eyepieces). Step 8 - Adjust camera focus knob until camera is also in focus.

On AliExpress there is identical 4K camera on Eakins microscope store. Is this the same camera with other brand logo?

Any idea why when I install it on my AmScope SM-4NTP the corner of the image has a black spot like the optics are blocked?? I'm new to microscopes lol

Question on the 4K HDMI capture card. Should I get it even if I don't currently have a 4K monitor? Will the capture card work anyways with my 1080P monitor? Thanks!😀

Did you buy the 16 LED or 120 LED version of the polarizer scope light. I see Sorin uses the 16 LED version of the same brand in your link. Thanks

Good video. AaDo you advise me to buy a Dx 4K mini camera or a Sunshine M11 camera?. Or any other camera you recommend? please. I want to mount it directly to the lens

How much does it zoom without any lens other than barlow lens?

Great video brother

Have you found a pdf manual for the camera? Or can you tell me if the 16:9 is the correct setting in the menu? Also, how do you get the max resolution as in OBS there is only default and custom. Other than that it is working great and your set up instructions worked beautifully. Thanks.

hello,
what sensor does this camera has? did you check it?

what is your anti glare ring light? thanks.

Awesome video! I just ordered a simufocal amscope to replace my entry 400z and I had a bunch of questions regarding the camera setup. This video is exactly what I was looking for! Thanks!!!!

I have rf4 6565 pro and the camera is rf4 2k . I can’t get the same view in the camra .
Samera view is too small like a half.
I want full view as like in microscope
. Is that a camera falt or lenz. I using 5x pro lenx under the camera.
Any idea about fixing the view?

thanks but no thanks, not for that money... like crazy they started increasing prices in the last 1-2 years, such toys were up to 80 usd, that should be the maximum!

Great video friend, I'm looking to buy one through Aliexpress, I would like to know if this camera supports "Mount c" lenses with a 25mm thread?
Thanks.

link to spacer please

Cheers for this, I learned more from your video than a whole bunch of other videos put together 👍

comment

Thank you! I was wondering how to synchronize the zoom. I didn't realize the eyepiece lenses can be adjusted too

The remote and camera have buttons indicating record and photo. There is also an SD card slot on the camera. However, I can't get it to record anything and don't have any options in the menu for format or anything like that. Do you know if it is supposed to record directly or are those buttons left over from another model that uses the same housing?

Before i buy this camera one question friend. Is there a way to add millimeter on the screen ?

This camera is far from the best. It does not even have autofocus which is a game changer for this kind of stuff…

Don't buy this if you dont have trinoculars, pay a bit more and get autofocus

Can the camera output video through usb like a webcam?

If the camera has a USB-C ort, can't you just get the image via that port, rather than converting HDMI to USB via a separate device?

Took a risk and bought this. Just unboxed it today. The image seems pretty good, but none of the buttons work. It can output over HDMI directly to a monitor, but I can't open any of the menus from the buttons and it won't capture still image or video to a memory card.

It didn't come with a manual of any kind, which is normally find if the interface is intuitive, but the buttons don't work.

OBS Project can display the image from the camera, but again none of the camera settings can be changed through OBS and the buttons don't bring up any menus. OBS would be good for capturing video, but half of the use of the camera is just taking screenshots.

This is the second microscope camera I've purchased from China and what I don't understand is that the hardware (sensor, buttons, enclosure, etc) seems to be decent but the software is only half functional. The hardware is the difficult part. The software should be super easy to put together, but it's always half broken and makes the product mostly useless.

Jesse, I wouldn't recommend this camera any more. It's just not a good product.

FPS is terrible or is this your setup ?
Its very choppy.

Hello Sir,I bought DX 4K mini and scope today but I can’t connect to my laptop to see view.Should I buy cam link?

Hey bro, please if you can tell me
The size of this spacer - is it a 5mm spacer? The exact name would really help me out. I’m a diamond setter and have bought a camera with scope recently , the spacer is so crucial and I need to know 🙏 thanks

Looks more like 720p

What do you think about binoculars?

Awesome content sir question where can I get the spacer that goes between the adapter and camera

what lens did u use..0.5 or 0.7..i use 0.7 but it not tally

Hello, I would like to buy this camera to replace my old one but I have a question. Do I still need the spacer if I'm going to install a C mount lens to it? Thanks in advance