Комментарии:
Thank you very much 👌🏾☺️
ОтветитьIs there a way I can connect C9500 & C9200 using RJ45 10G link for more than 50m distnace?
Ответитьthank you man
ОтветитьIs there any configuration involved?
ОтветитьThank you Compnology LLC!!
Ответитьthank you it was good , can those switches be stacked while they are powered on
ОтветитьVery well explained 👍
ОтветитьExactly what I was looking for, both the demo and information! Thanks!
ОтветитьThere is a good reason he didn't screw those in real-time. They never match up great, especially w/ Chinese-made cables. So, put aside 2 hours just to work those in. Also, screwdrivers help. Finger-tightening doesn't work great.
Pro-tip: The data cables WILL fit into the holes both ways. They will NOT be able to be screwed in, if they are the wrong way. To get them the right way, look at the sides and just make sure the Cisco brand logo is right-side-up. There was no other indicator that I could find.
Thanks you for video. Can you teach, how config it ?.
ОтветитьCan you use the cables from the 3850s?
Ответитьthanks for video
ОтветитьThank you it was good demonstration
ОтветитьThanks! It's really helpful.
ОтветитьExcellent explanation
Ответитьwhat happens if I go GREEN/YELLOW on the top and YELLOW/GREEN at the bottom for power stack?
Ответитьthe power stack is wrong
ОтветитьDear you have nice way to tech about networks please upload more stuff
ОтветитьWhat is the power stack cable part id
Ответить