How to read cluster EEPROM - Audi A3, S3, A4, S4, RS4 & Golf Mk4 R32 Gen. VAG EEPROM Programmer link

Hello what kind of cable obd2 usb do you use?

Hi Ian, love the videos! Thanks for sharing them. Do you recall the password for the .rar file you shared the link to? Thx!

Where u from bud? Aust? I have 2004 S4 B6 rb4 color cluster that i would like to have work in my a4 b6. The only thing is the s4 cluster came out of a auto car.. will it work?

Hey. I’ve done the boost gauge/lap timer mod on an S3 8p cluster. But do you know how to change the range of the boost gauge so it uses the full bar animation? I’m guessing there is a standard range like .2bar to 1.5bar that would need to be changed. Thanks

Hi I am trying to read an A3 8V cluster, its an 18 pin. I cannot find a pinout diagram anywhere. Part number 8v0920 970R. Any idea how i can find out? Thank you

thanks!!!!!!!!!!
the only download i was able find after days and days of searching for a virus free link
even though this one gets flagged three times on virus total windows antivirus doent flag it so id say its 95% safe
now just waiting for my 1J5920826A cluster to arrive and get it coded,
if im correct itll go as such:
plug in new cluster to car, turn key to run position, attach obd interface run eeprom programmer of choise, read the cluster eeprom, backup the dump, note the SKC, change the mileage to 0km, write changes

then with proceed with vcds following rosstech istructuctions on cluster adaptation, pairing keys and mileage adjustment

Hello, is it possible to read vw golf 4 1999 1.9 tdi immo2 cluster? Because it shows an error for me

****MERCI****

hi i have a a3 8p 08 i want to change from no display cluster to white fis cluster what is the cheapest way i can do this thanks!

Thank you so, so, so much for providing the download link. It is nearly impossible to find a download link fpr EEPROM Programmer. All are junk. Found a guy on ebay who asks for 50 bucks for this freeware. All I want to do is to replace a defective cluster by a used one. Now I'm able to do so. Thanks again, Chris

I installed windows 7 and it still doesn't work. it tells me unable to find usb device. can you help me ? thank you

I have a golf MK4 2002 plate. What would I need to be able to read the secret pin (sku) and also program a key so the remote fob works? Thank you in advance

Ive just used version 1.9 and it worked with windows 10,but car says its a Audi A6/S6, its not and mileage is correct and in km, but the vin and hopefully the login are right .

How to get vag EEPROM programer on internet

I tried to follow all your instructions, but it still doesn‘t work. So maybe it‘s the cable. I‘m using a cheap HEX+CAN cable, but in the VCDS test, it shows that CAN is not ready. So do I need another cable or can I check something else for mistakes?

How can I do I want to put like 45,965kilometers

Can I change mileage for Benz,tiquan and toureg using dat idea

How to get codes of mileage in EEPROM

What OBD cable do you use as ive tried it with the VCDS HEX-V2 cable and it says device not found ??

Good video, a bit more detail and a longer video would be great..Cheers

Can this programmer be used for A4 B6 as well?

hello is this software work for 2013 audi a4 ?

Is this working on Audi a4 2009?

doesn't work for golf 5 and skoda octavia 2, help? rx timeout or ecu not found!

I'm not sure if i understood it correctly. I have to change my cluster on my Audi A3 8L '01. If I make a copy of my old EEPROM and paste it onto the new cluster, will it automatically work? Or what is this step (copying the EEPROM) else for?

My says no ecu found need help😢

When i load 24c64 eeprom data nothing happens. Show only offset and no data. Any advise?

There was a problem with the Volkswagen Golf Plus, 03C906056AB, 0261S02117 1.6 FSI. Flash and eeprom

Thanks Ian. I figured it out. Defffinetely worth shooting a video.

Can you use any OBD cable?

Hi dear u can read eeprom 24c64 and were right VIN

Work on a 2000 Beetle by chance?

Thank you.
1. can i find the program for windows 10?
2. And, can i do it via obd port or not?
3,. Oh and something else, the cable from vcds will it work with the eeprom programmer?

Thank a lot i wish i will have some answers for my questions.

Wie funktioniert das bei renault Phase 1

I see you have a wiring setup. IF I go to salvage yard and get a set of connectors will the connectors be pinned out the same for example on a 2000 VW Beetle? It has a cluster that shows 2002 or 2003 time frame as I don't have it in front of me.

A wiring setup for the back of the single cluster assembly is what I have.

Also can this software be used via OBD on the vehicle if we are able to extract the pin code or not?

If so then I think I may have have the pin code as I used a aftermarket scan tool available for locksmithing.

If I knew which wires were what we needed to hookup as in power 12v, negative?, CAN, Prog, etc I would use a pinout as I have a programmer by Autel as well.

hi, can you tell me whether to replace All with the letters FF on the airbag computer to reinstall the crash. because my device does not erase automatically. Basically how to know where to put which letters and numbers if necessary.
Or replacing start to end with "FF" resets the crash in the airbag computer? thanks again

salut, pouvez-vous me dire s'il faut remplacer Tout par les lettres FF sur le calculateur d'airbag pour réinstaller le crash. car mon appareil ne s'efface pas automatiquement. MERCI

I have hex V2 cable (not original). Can use the vag eeprom programmer software?
Or any other program that i can read the 7-digit SKC on my golf 5?

Do you know what values to change to enable boost gauge and oil Temps?

I do have few questions. I have a 2003 Vw jetta tdi maual transmission and the instrument cluster I think is dead or no responsive. Is this like cloning the Instrument cluster? If so can I transfer all of my instrument clusters data to a used one from another Tdi of the same year and have to work in my vehicle with almost no issue? Also does it have to be another TDI cluster or can it be a gasline cluster? Thank you for the great Video and info.

Any suggestions for rb8 cluster?

I also tried to read my KI eeprom to set my mileage but everytime i try i get "RX Timeout" error after the KI is detected. Does anybody know how to solve this?

Hi. I have skoda superb 1 clusters and I can't read eeprom. Clusters are latest version from 2007-2008 ( white dash and dpf ). Eeprom programmer give " can't read it, eeprom area locked" and commander after a few tries with " trying different login codes " give " wrong security / login code ".
I have tried many methods with info found on internet , connected with blue kkl cable and with serial cable, same result.
I read somewhere that it would be immo3 crypto and it can only be read directly from the memory, with a programmer. This is true? I also tried crypto/ set as new etc... No result.

is it possible to add lane , parking assist etc on vw mk4 2004

Hi Lan! Show me the wiring diagram please.

Hi Ian, Just wondering if you were located in Melbourne at all as I have a Audi A3 8p cluster I need repairing/programming immob. Please Pm me if interested, Thanks mate.

can you tell me pls how to solve no ecu found problem ? thanks !

is this free to use ?

Hi, for Audi A3 8P year 2009 is't same?