Комментарии:
Hi, great channel!
But, what about using something like dspeaker in an 2.1 stereo dedicated set using an integrated amp. How to make it work?
Hi, when using audyssey auto setup, we should leave only LFE connection between the avr & the Rel correct? what about the Crossover dial on the Rel sub? that has to be left on a certain level or it doesn't matter what its set on? Thanks.
ОтветитьNot helpful at all, when you disconnect neutric at calibration step. Audyssey sets front speakers to small size and cuts all low frequencies. If you connect neutric back after tests all low frequencies already cut. What I do, I set them manually back as large size... I did not measure results by reference microphone. But what you suggest sounds illogical to me.
Ответить@rel acoustics in regard to setting the high level crossover frequency and volume, would it be safe to assume that once my room correction software set the volume and crossover frequency for the LFE .1 channel that I could just mirror those settings manually using the dials on the sub that control the high level settings?
ОтветитьHi, I have ask. On the main photo , what kind of speakers you have (I mean brand)?
Ответить@rel acoustics This video only talks about REL LFE . How about 2.1 high level input system using impulse room correction with inverse phase pulse to eliminate room mode including as standing wave and reverb at listener’s position?
ОтветитьHi can i set up audyssey without the high level and LFE, then put on the subwoofer after calibration...i have a rel S5 and and focal arias powered by a denon x6700...bass is quite low at the moment after calibration on LFE and 2 channel play back
Ответить