Chuck Installation Guide

your tech just used a torque wrench to loosen bolts. lol.

What is the name of that black device which used to loosen chuck? Regards

is there a video like this for 4th axis chucks?

такие пиздабольство. это как рюмка в серваньте

Demounting of the chuck can much simple!

So what do you do if...

- No matter how much weight you take off the chuck with a hoist.
- E stop the jaws half way between close/open.

And the drawnut still cannot be removed, then what?

Cause I didn't see no answer to that.

A spring between the crane and lifting eye would make all steps much easier as it would make the part essentially float by hand

Поставляют не исправные станки. Обязательства не исполняют. Сервис дерьмо. Продам это дерьмо что купил

That's the hard way of putting it on... Bolt the chuck on first. Make the draw bar is all the way back before bolting. Once bolted . Step on the foot pedal to have draw move forward. Once forward insert the chuck key and begin to thread it on... You will never have a problem,I guarantee it... Plus you'll never chew up the threads on the dram bar... Especially if you switch between a collet chuck and 3 jaw chuck as much as I do...

Hanzhen harmonic drive gear , robot arm gear , joint acurator , over 30 years experience ,

How come you don't fix sick seconds 5 axis machine. Is your stuff really junk?

Congratulations.

Holy Mackerel! Using tweezers!? I can understand, but a boss that doesn't or does'nt wanto understand?!

So what do you do when the chuck jaws are stuck closed? Don't want to damage the threads on the draw tube or nut.

What we have on our machines ( Tobacco Industry ) is a tap ( M16 ) on top of each heavy subassembly. We can screw in a tube or rod and a high matching eyebolt. Install that and than U can easyly unscrew the subassemly - chuck in this case - , slide it out of their mounting taps without worrying about the height or demaging. Also no need for this adjustable spanner to unscrew. After that , the subassembly can be lifted out of the machine by crane or if possible by hand. 100000 x easier...

I don't know anything about this industry and/or this Haas company but for sure they have embraced modern corporate communication and watching their videos is quite fascinating for anyone loving mechanical stuff. Well done Haas.

Eat a tripple whopper and you dontt need a crane

I wonder who the sponsors of this video are.

why can't you just remove the drawtube while the 6 chuck to adapter plate mounting bolts are still tight?

En español por favor , gracias

I’ve worked in 8 precision engineering companies and not one of them goes through all this fannying about. Wizz it off and give it a blast with the airline.....done!

Понятное видио, спасибо

Very nice video, now i just need a Haas ST 30 SSY haha

Thanks wery much. This video is really good help for me

it's like changing tyres

Ty vole ty ses sráč, sundavat to jeřábem :)

I have a 10 year old machine at work, st20 chuck has never been removed or maintained..should I even try? Previous people in power since removed, believed these machines were "self-maintaining."

very usfull evry time watch thanking you sir

M19 lest gooo. Turkis 😀

i always find your videos very educating. great work guys and thanks

That was fantastic and helpful and very good visual information

Nc. Autto feair òpeandr

Best practice to avoid rust while chucks are in storage?

If you have several of the same lathes with the same chuck is it advisable to have a spare chuck so that at 6 month intervals you can pull the current chuck, replace it with the spare, then work on the removed chuck? If so, what is the range of prices for a chuck?

Use M19 to stuck the spindel

I want to remove vibrations created in my cnc due to large tool overhanging ( id boring dia 40mm tool overhanging 160mm normal local holder) please suggest any solutions to solve it

very very usefull video Haas trhanks for your support......

Nice video, but - always wear protection- (examination-) gloves if you handle with grease, oil, or cleanser !

HOWTO DISC ALINMENT IN BMT 45 TURRET OF SAUTHER

拆爪子螺丝 直接用主轴锁死不就好了。

If there were only a tool that would prevent you from having to this at all! Oh my friends there is! Check out Nub Tools' Collet Master Jaw System

Excellent informative video.

Haha sukkels

So useful. I've done this on my st-30 a few times now. But it's been a while. I have the same chuck as shown in this video 10". Can you help me on what torque specs the bolts for the chuck and adaptor plate should be at? I had them in some notes but can't find them thanks.

At the beginning you need to set a very low pressure. Correct me if I'm wrong, please !!!

how do yuo slow down the tool arms speed the ones we have come down to fast and bounce and it keeps throwing the setter off
Reply ·

Thanks for such usefull stuff.