3000W/6000W Off-Grid Pure Sine Wave Inverter Any Good? Find Out!

For those of you that don't want to open up the inverter to make the modification shown in this video(If Needed), you can also use a 1 foot 12 gauge heavy duty extension cord with a plastic electrical box installed in the middle for the breaker. Thanks for watching! Be sure to share the video link with others.

Will a 150ah(15a at 120v) 12v battery power a 15a circular saw with a 2000w(16.6a at 120v) inverter??

Very good test🎉

No mention of Earth connection be interested in your reason .. it’s there but you did not use

Brass has more resistance. Brass is only used for terminals cause it's easier to machine

I regularly hear people complaining about Chinese made inverters having a short life expectancy, regardless of how impressive they may sound in their reviews. I wish more of the reviews were done after two or three years of use. May I ask if there are any inverters you have known to be reliable two or three years of use?

Can you use multiple units for more capacity. 5 units, 15000 watts?

Have you measured decibels of fan noise under full possible load for this inverter? Prefer to be tested with silent loads, like with heaters with no fans. Mine must be placed inside a one room cabin, so noise matter.

I bought this one. It seems to be working good going on three years now.

👍👌❤️🇨🇦, gr8 review , thank you

I just picked up one of these new for $30, if I blow any fuses inside, how do I discharge the capacitors so I dont die while changing the fuses?

Hy, good video. What a model it is? Thanks

Question. I've a submersible water pump that I intend to use , Off-grid, for 12 hours every day,. The water pump power rating is 1700w(1.7kw). I also have an array of Solar Panels of 3600w output capacity. I've no need for battery or charge controller, only an Inverter, as I don't need to store energy. I intend to use the power directly on the appliance. What size/capacity of Off-grid Solar Power Inverter do I need to buy. Thank you.

You can start circular saw plugged while it is on the ground if you don't need your lwgs anymore. Otherwise you cannot do that and show it to people who may not be aware of a immediate danger!

You can start circular saw if you are done with your life or part of your body. Otherwise you can NKT push that button when not held properly by two hands.

I would've like to have seen you cut some wood. Running the saws under no load isn't very helpful

Pakistani price .....kia hy

এটা কোথায় পাওয়া যাবে

I didn understand the part. That why you should use a breaker

I was told an inverter will burn up if my lifepo4 battery shuts down before the inverter can shut itself down for low voltage, while under load. I have yet to get one of my 8S lifepo4 batteries, to get down to 10.5v before one of their 8 cells gets too low and shuts down the pack. IS THIS TRUE? HAVE YOU GOT A WORK-AROUND for that situation? Maybe a 24v capacitor pack thing, to slowly go down to 10.5? That would make a great product and video. The whole lifepo4 battery pack thing is really starting to aggravate my. It seems like a person needs to babyset these damn things when charging and using.

300 amps? what size BMS can I get away with I'm building a 320AH , 8s, 24vdc lifepo4 battery . but I think my BMS is 120 a

300 Watts is not 300 AMPS! WORLD OF DIGGERANCE!!!!!!!!!!!!

Ma in italiano

They are looking for influencers, and aren't you?! 🤣

How much ampere do you have three battery 12 volt and what number of group do you have?

Great testing. I'm in the market for a inverter so I really appreciate this video DexterousX

It would be much easier if the death Penalty was introduced for sellers who lie about their products. But on a positive note, your testing regime is very useful. Thank you.

May you try using a electric oven with a battery and a power inverter.May you tell me how it works.And explain to people that a 800cc or a 1000cc battery is better then a 600cc battery ?

Wow. 3000watts out of a battery

How do I discount the low voltage alarm
My lithium batteries
Work well below 10 to 10.5 volts
I would rather not have My inverter cut off at 9 to 10 bolts as well.
Like I said if my batteries lithium batterieswork until around 7 volts why should I go without power at 9 to 10 volts
I hate that to me, worthless alarm.

They should’ve installed a 20 amp receptacle instead of a 15 amp receptacle. And actually they need to start installing tamper and weather resistant receptacles on these devices. As much as they cost they should be installing top quality parts and devices.

Thank you for the video. I've been dumbfounded by the ABSOLUTE junk being sold on Amazon, ie 6000w with 900w sustained, what a joke. Anyways, thank you for the effort, this one looks like a keeper. Yes, for heavy loads, a double stack of marine batteries would work.

Could this supply a freezer with 500w?

What kind of battery you have looking for one for my 4000 watt inverter.

we have to see the wave form when its i under load ....

Does it charge the battery and can a solar panel be connected to it

Ive just bought this inverter, and I am glad you said it was ok, now I need to know why its bleeping and the batteries are full. I have connected 2 12v batteries 100 ah each with the wireing in Parrell, and as you know one wire is from positive to negative in the other battery, all connections are thick good quality copper, but the positive to the negative wire connecting both batteries is thinner could this be the problem? I had a modified inverter before and it had the same prob,so sent it back. also the inverter say you should not connect positive to negative, but if not how can one do parell conections?

Need to try this under load ..meaning while cutting hard 🪵..As far as the saws go

Hi. Is possible to use pure sine and modified inverter in parallel.

goodjob sir

Thanks for the videos,
But to make it legit when testing with power tools one thing is making the tool start, another is to making the tool cut something.

How long can a 20Ah 12v battery power a 1000w ?

Learning new things as a Wanabe off grid Yahoo. Trying to savor batteries for night time or inclement weather so I want battery-less to be an option. I'm aware that I'll need full blast noon time sun on the panals for best performance without batteries.

hey just wondering for a small 1700 pressure washer or a small 2hp shop vac how powerful of an inverter would I need? Thanks for any input!

What brand is this inverter

To bad you did’t show the sinus wave om Max load

Hi, is it possible to connect inverters in either series or parallel to meet a whole house total power requirement as opposed to connecting individual/ group of equipment to individual inverters. I'd really appreciate your response, thanks.

Is it me? What is the Brand and Model of this unit? Very detailed review indeed, I was drawn to this video because you said it can handle 12V, 24V etc and also outputs at 120V or 240V?

I want to see you load down the Delta chopsaw while cutting wood for about 10 minutes straight if I can do that and I can do it every day then it’s a good inverter. High frequency transformer style inverters like that can’t really handle too much inductive load.

Are use an outback fx2524 inverter run a chopsaw to Cutwood for my woodstove all winter. It’s never failed me. I can sometimes see that I’m pulling over 6500 W off of the inverter and it still will not quit.

Great job.