Комментарии:
you should remake this video fr33thy.... cinebench ain't it
Ответитьну эту инфу ты украл у блогера я знаю даже у кого
ОтветитьLollol followed steps. Now cpu is stuck at 4.7ghz while I have it set at 5.5. This is on 13th gen. I’m gonna use Skatterbencher his tutorial
ОтветитьIm trying to OC my i9-12900k on a AsRock z690, using Intel XTU for now still experimenting with 5.2-5.4ghz Pcore ratio and 4ghz Ecore ratio. If i had the knowledge to do the changes in UEFI i would, i could probably optimize the settings alot more if i could pick fr33thy's brain. Offset voltage is +0.050 AVX +1.00, im on Windows 11.
Edit: Im now running OC from UEFI instead, P-cores all clock 5.2ghz, E-cores 3.9ghz, AVX2 offset 2x. However im not sure if the VID is something i should try to match? VID is max 1.487 when gaming, and my voltage is set to 1.450, it say 1.464 maximun in HWiNFO. If anyone knows the answer to this ill gladly appreciate it:)
Just wanna say thank you again for all of the hard work and the amazing videos packed with information. I used the optimization pack, and it made a huge difference. Now on to overclocking the CPU
ОтветитьThanks for this video man, this video helped me a lot, my Intel i7 lga 1200 are performing way better now with 4.8 ghz and 1.3 voltage, and I gained more FPS and its stable now on the temps. I did everything you showed except the EIST being disabled I left it on, so the clocks go down when I don't game,and I completely disabled enhanced boost, left Intel boost on, and the rest was replica of this video.
Ответитьmy bios is not have overclocking
Ответитьcan i overclocked non k cpu?
ОтветитьHello, I'm using i9-9900k , MSI MEG ACE Z390 and ARCTIC FREEZER 2 360. I cannot OC my CPU to 5GHz or 4.9GHz. This mobo has 2 8pin CPU power but my PSU has only 1 8pin. Is this the problem? I watched many videos on YT and most of Overclocker using only 1 8pin. Thanks for answers and thank u FR33THY for those videos!
Ответитьtop video.
ОтветитьDid you take down the OC and BIOs setting you did on the asus MOBO
ОтветитьHey there, what overclock do you recommend for intel i7 10700k chip with Msi z590 motherboard .
ОтветитьDoes much of this apply to 12th gen? I just swapped over to a 12700kf from an AMD 3800x.
I need singlecore performance for DCS (digital combat simulation) in VR -- at least until they finally swap over to Vulkan.
I'd love some quick settings to get a good stable "daily driver" OC, and something for single thread just for DCS.
The menu's in these BIOS are fucking crazy, just gimme the good ole basic shit, or at least sort it out to a few different pages so its not a giant clusterfuck of random shit.
Good videos man
ОтветитьMy option to disable C-State is greyed out. What's stopping me from modifying that???
ОтветитьDude i am sorry, ur guides might be good but doing overclock on 3080 and me having 2070, didnt work at all, i followed ur guide and in Ac valhalla it started crashing eneded up with blue screen, not saying that bf2042 is unplayable...good efforts though
ОтветитьLover youre guides, did total reset, and all of the optimizations and so on. And i see about 30 more fps and i dont realy dip under 100 in bf2042 wich maybe not is a good benchmark.
I have a desent setup. Intel 9700k, 32gb ram 3600mhz (but in bios it says 3200). A asus rog 390 gaming motherboard (where i have optimized according to youre video and turend of averyting i dont need). I have a mzi gaming x trio RTX2080. I have a coolermaster watercooler. And it realy keeps my cpu cold.
So im in the part where we start to overclock. I have never been intrerested in this. But since i dont want to upgrade now when we are close to next gen both in intel processors and ddr5 i want to get a little more ouf out of what i have.
But when i try asus own AI overlock or follow a guide that gives me ghz i get a bunch of different bluescreens and my grahphics drivers crashes.
And what i remember this use to be to much Voltage and heat?
What would you try first? Could it be a bad ram stick? The fakt that they dont go in 3600 wich it supposed to..
Great Job. Thank you, you are the best.
ОтветитьWhat does the ring ratio do ?
ОтветитьHey bro can u make a video for stress test a cpu after O'C
ОтветитьWhere is the first step video for optimizing windows. I just reset windows 10.
If anyone know please link me to it. Thanks
I use obs to stream but using nvenc to encode. Will avx off affect that?
Ответитьhahaha what is this tutorial haha nice joke
ОтветитьHi bro
I have pc gamer with ryzen 5 3400g and vega 11 and 16gb ram
I have a some drop fps in games
What I do please
Please I need fix?
6th degree black belt in computer optimization.
ОтветитьIve been following your channel for the last couple years now and you are a Fucking genius man and Ive been playing around with your bcd edit on this new windows version 21h1 and I did a fcuked up thing that made my pc go into complete GOD MODE it has something to do with these. i have an i7 4770 and i feel like ppl are lagging around me im atleast half a second ahead
@echo Boot timeout 0
bcdedit /timeout 0
@echo
@echo Disable boot screen animation
bcdedit /set bootux disabled
@echo
@echo Speed up boot times
bcdedit /set bootmenupolicy standard
@echo
@echo Remove windows login logo
bcdedit /set quietboot yes
@echo
@echo Disable boot logo
bcdedit /set {globalsettings} custom:16000067 true
@echo
@echo Disable spinning animation
bcdedit /set {globalsettings} custom:16000069 true
@echo
@echo Disable boot messages
bcdedit /set {globalsettings} custom:16000068 true
its weird that 9700k/9900k the maximum is 1.35v when the 8700k/8086k/8600k can do up to 1.45v
ОтветитьYou should do amd chips
ОтветитьHi, I've followed the guide. But my cpu downclocks when I launch a game. Any ideas on what's going on?
Ответитьi dont got twitter
Ответитьguide for gpu underclock ?
Ответитьthe fucking goat, this new playlist is lit!
ОтветитьOverclock BF 2042’s release for me bruh
ОтветитьI have been diving into the depths of Gentoo linux recently. I was wondering if you have every played with it. You can tweak EVERYTHING in the kernel and compile everything from source. People often compete for the most performance and least amount of ram used. I figured you would enjoy testing gentoo and spend hours trying to squeeze as much performance as posible!
Ответитьwhy cant i download anything from the file it says it is not there
ОтветитьMy 9700k wont do 5ghz without 1.38 not getting over 70 at all tho
ОтветитьYo man can u answer me just 1 question, I downloaded both 20h2 and opt pack from ur google drive so I can save them for my windows restart, can u pls tell me what pack should I stick to (cuz I've seen that some things repeat in both packs)
Ответитьplease make a video about throttlestop my bios is lockup :(
ОтветитьPlease man make AMD one struggle is real with Heat shit .
ОтветитьCan you OC a I5 9600KF ?
Ответитьi dont have c state settings. i have package c state limit and enchanced halt c1e. what should i do
ОтветитьWill this guide be use on a laptop that use intel?
Ответитьdo one for amd pls
ОтветитьHow to overclock non k intel CPU’s?
Ответитьcan c-states be disabled on cpu non k?
Ответитьram overclock guide please! love your videos
Ответитьwhat about using 2 vs 4 ram sticks? and what about 11700k vs 10900k?
ОтветитьDoes OBS use any AVX instructions while encoding via NVENC? I assume it uses plenty with x264 but not sure about other encoders.
Ответить