Комментарии:
We'd love to see a photo of your sound system. Tag us @kettnercreative on any social site.
ОтветитьDetailed and precise
ОтветитьHow do I do Dante connection to the pc/laptop ?
ОтветитьHow are able to record thats the problem i have
Ответитьi found lot of noise connect mixer to pc via 3.5mm plug directly to mainboard, even i turn off mixer, noise doesn't go away. Could you help me how to eliminate the noise?
ОтветитьWhat if I dont have an output on my mixer do you have a solution for that?
ОтветитьDo you have a video how to connect a PC to a mixer going into multiple power amps.
I want to listen to my DVDs or CDs from my PC and send it into a mixer before going into 4 separate power amps and 2 powered subwoofers.
Thank you so much for this video! It was a blessing to find this video, it helped to much! God bless
ОтветитьHow do I do the reverse order. I want my sound from the computer go through the mixer.
ОтветитьGood vid - thanks
ОтветитьYou have mixer in your computer but you don't have computer in your mixer. You are only hooking up half way.
ОтветитьI do live internet radio broadcasting with skype guests. I use the same method as you did in number six but I use the outputs of the interface to put computer audio back into the mixer. Left interface out into channel 3 and right interface out into channel 4. That way I am able to capture and control all of the audio before I uplink that final signal to the icecast servers.
ОтветитьGreat 👍👍👍👍
ОтветитьYou can also connect an audio mixer thru a DDJ into your computer :D similar to an audio interface. Great video as always!!
ОтветитьExcellent video, thank you so much
Ответитьdon't the mic and headphone jack is ony single plug in the PC? 3.5mm TRS Jack...but you are saying if a computer does't have... How
ОтветитьOMG! Thank you for this!
ОтветитьOk that is a LAPTOP, not a PC/Computer... Totally two different things. I like how everyone makes video's... and think all mixers are the same... I have a xenyx 802... think I can find someone that can show the correct way to connect it to a Computer... That would be a big no...
ОтветитьCan also you use interface if you just wanna play music with PA
ОтветитьWhat about a bluetooth device like a xvive P3D or P3 to pc with bluetooth?
ОтветитьWhat about for the actual mixing? what use is a mixer plugged in to the pc when you can't mix whatever audio you have on your daw with it? I'm plugging mine in from mixer to PC just fine, the issue is getting the recorded sound OUT of the pc and through the mixer, for mixing, without feedback.
ОтветитьI watch streaming video on my laptop. My pc speakers are plugged into the headphone output. But some frequencies are annoying and I want to cut them back. So I I want to send the headphone output of my laptop to an equalizer, then send the EQ output to my speakers. The problem is that the EQ has line level inputs and outputs. I know there are cords that can split the headphone out to RCA R/L, and then do the same in reverse. What I'm unsure of is whether this will work electronically. Any insight is appreciated.
ОтветитьHello, so I want a balanced connection so there's no interference. Can I use a dual 1/4inch trs into 3.5mm trs cable from my mixer to PC? I can find this cable.
ОтветитьWould i be better to get a dual ts or tsr 1/8 inch connection for a computer?
ОтветитьCan you set up floor monitors to this mixer?
ОтветитьNiiice
ОтветитьThank you Jordan for the insight. Your distinctive vocal style and accent actually draws out the sound quality differences of each alternative.
ОтветитьWhen I plug the mic into the computer bypassing the mixer it seems to work fine, but nothing through the mixer have I been able to get through the MIC.
ОтветитьWhat software mwould you use or recommend to see the bar meters once the mic is working?
ОтветитьIs the MIC plugged into the mic or into the headphone computer jack?
ОтветитьI am new to streaming and the process is not easy... this video has made things very clear.
Any advice for how to hear your stream from the perspective of the viewer or follower? Once I plug in my USB pre-amp/audio interface, I cannot hear my volume.
hello idol can i ask you what software you use for recording??and free for download
ОтветитьGreat, really, but how do we get the sound out to the mixer for playback?
ОтветитьIs there not an all-in-one digital mixer/interface combo for recording into a DAW for music production?
ОтветитьCan I use the usb-a to send audio negative from my computer to the usb port of the mixer to play it along with the live person, or is something else I should be using?
ОтветитьIt would be great if you add a speaker.
ОтветитьVery good tutorial! 👍🏾
ОтветитьSeems like the audio interface has some issues compatibility with 2.0 to 3.0 usb is it that true??
ОтветитьDoes this console perform DAC and ADC?
ОтветитьWhen i use the mic in on the pc but feed it a line level signal from the mixer that is bound to clip wont it ?
ОтветитьWill two XLR to USB cables connected from main outs be picked up as two recording signals in one DAW project recording?
ОтветитьFirst class explanation
ОтветитьIs it the same if my laptop has a mixing 3.5 hole (for both micro and speakers)?
ОтветитьThank you for the video!
ОтветитьOh by the way don't do what Atomic Kitten did. Don't connect your mixer to the Blue LINE IN of your on-board sound card. You might as well record a demo tape on a portable cassette tape recorder and have the same quality. You're better off hiring a music producer to do all the work for you (Atomic Kitten went this route).
Ответитьyou have MY information.
ОтветитьThanks, Jordan. This was by far the most helpful video I've found on this topic. Much appreciated!
ОтветитьSo if i have one of this would i still need an audio interface (irig etc)
ОтветитьLovely presentation.❤
Ответить