This is The COMPLETE Oxygen Water & Electric Guide To: Occupy Mars

Merci beaucoup

So to place a well, you need to be on wet soil.

Like recently started occupied mars. I have two buildings on my base and too well water wells going to it, The amount of water that I get income is 6. How do I get that raised up higher?

can you place wells anywhere and still get water from them?

I need more O2! I seem to be consuming all of the O2 with my tiny little base and there isn't enough to refill the O2 tanks in the rover. I've temporarily disconnected the oxygen from the base and connected it to the rover but it seems to be filling very slowly, so I need a faster way to produce oxygen, as well. Can you help with that? Is there another better or faster way to fill the rover O2 tanks?

but if you put more solar panels, you connect them to the first transformer, and then you need to add more cables from the transformer to the battery? or just owith one cable you get all the energy from multiple solar panels?

Still trying to figure out what a "baa err ree" is. Is he referring to baTTery, as in pronouncing the "t"'s in the word? Have the British just abandonded the "t" because of that American incident about 250 years ago?

The developers lack imagination. We should be able to make circuit boards in the printer, and then complete them using the workbench. But no, we have to pray to the RNG god to find them. Fuckin nonsense. Impossible to play.

How the heck did you rotate your transformer! Not obvious to me at all.

i am seeing an issue where when i turn on CO2 scrubber it kills base power when i have way more power then the requirement from the co2 scrubber am I doing something wrong?

Sir excellent video and thank you for doing this I found it extremely helpful.

Ohh FFS I feel like I been all over mars and I got not tablet for Sabatier blah blah :/

Great job. Nice and clear explanations. Thank u.

You got my sub, and a like. This helped me out. I’m tired of eating MRE’s lol

OK so I ran out of cable, well, actually the cables I had are on the ground and I can't figure out how to gather up what I dropped, but how and where can I make more cables and hoses?

Very helpful! Thank you so much!

bro! i was lost on the o2! ur the man!

how did you pick up the lines from the ground? my base is littered with electrisity cables becaus i cant get them back into my inventory if i dont need the conection anymore😂

Hiya, nice video, when I loock at the airlock to see the needed power, all it shows me is the following:

Airlock Iris
Usage: 2.50

and nothing else. I do not see Structure and I am wondering why that is. Very strange.

That was excellent again thanks. I have a right mess of cables and hoses outside my workshop and sometime I will rebuild it all following your excellent instructions! Another issue I have is the scrubber - I am terrified of it and haven’t built it yet! I saw the developers did a “how to” guide of about a minute, which contained six things to watch out for. SIX! In one minute! For one machine! And the video very “helpfully” showed the player being electrocuted! Far too many levers and wheels to turn and adjust. It mainly separates Co2 as far as I can tell so great for cleaning your base after a sandstorm but so far I just hope that my batteries have enough power until the solar panels are clean again. So a video on that would be great - or even a comment as to how useful a piece of machinery it is.

One comment I'll add is that a base only uses its power so you can have Battery/Transformer outputing 100% of what your generating e.g. 135 kw/h to a building using 27 kw/h during the day and 31 kw/h at night the set up will still store the unneeded 100 odd kw/h automatically. You only need t worry about amounts if your splitting your feed amongst multiple loads. That is one load of 21/31 kw/h depending on day night just supply the whole generated amount, two loads of 21 and 31 then you need to ensure you have sufficient power for each.

thankssss!!

Can you plug the solar panel directly into the battery instead of going through a transformer to save a circuit board at the start?

Still can't make the o2 extensions for rover.... so i been setting up gas stations every 5000km or so at water spots. Small solar panel a well and o2... don't need the battery since i don't use them often... running 1/2 the time is good. And when my personal 02 bottles get low i toss up a survival pos fill the tanks and dismantle it lol.I can stay out like 5-6 days i search a site and completely grind it down then name it done on the map.

Issues I have still:
1. Rover O2 Extenders
2. Meteor Defense Rockets (Can make ammo or know how to load it).
3. Can't figure out how to use the helicopter Drones
4. How do you get rid of or destroy or recycle the seed magazines
5. Are the Decorations in the Printing Workshop (under decorations tab) able to be unlocked if so how, i got 2 unlocked.

The Water/Oxygen/Methane Lines do not have to be used for how they are colored. If you put your blue water line on the green o2 it will auto change to blue water, and you could have 2 water lines connected there if you wanted. Or two oxygen same with the pumps. So if you dont take your helmet off but need more water pressure for green house and domes u can connect 2 water lines so you do not build another workshop

Should add pumps to your guide. I Got 3 Wells - 3 Sebat's (o2) - 2 Pumps. Water Lines to the back In-port on 1 pump and 3 o2 Lines on the other pump. Then on the front Out-Line I got 1 Water and 1 O2 going to the Workshop. All three Lines on back can be pushed out one hose ot you can add more hoses - When I added the greenhouse i did not add 02 i used both connects for the of two water lines from the water pump.

Great video very much needed!

Defo gonna help me out next time I play was getting a little confused with it all thanks for the video Fort ❤

I wondered if it was possible to run a power line from the battery to the transformer. I thought about making multiple batteries with several connections but this saves a lot of pain. Thank you very much for doing this video!!

This is going to be EVERYONE'S Go-to Guide!!!

I couldn't figure out why the light was Red on the Workshop plug. After watching your guide I am guessing that it's because I don't yet have enough power going to it. And the Red light /Green light states are meant to indicate Not merely that it's powered but that it's getting enough power! Eureka!