Комментарии:
Useless
ОтветитьDo you have any videos on troubleshooting a Aquos Sharp television? My television is not working and I tested the fuses which is functioning. I am not certain what could be causing the tv to suddenly stop working.
ОтветитьI've used magic power module before and it worked but now there's no power anymore but if I remove the cable connecting to the main board the backlight will start and then if I put it back it won't on. And no standby indicating. Is it that the main board is dead?
ОтветитьHello sir can you help?
Ответитьit would be funny if you were saying dont touch this board, it is dangerous or something while you put your fingers inside haha
ОтветитьI have a samsung un50m5300af How many lights should a t con board have lit up?
ОтветитьMy samsung tvs power cuts in and out. The screen flashes then goes black, same with the audio. Both can happen up to 10-20 times per minute. I was told it started after a storm. Lightening maybe?
Just replace the power board you think?
I have a stand by light, I replaced all 3 boards,still have stand by light and still won't come on ,,,what next ??
ОтветитьThanks for the great videos!!! I have a TCL 50” smart tv. 50S434 model. I have horizontal thin black lines on the lower half of my screen. Everything else works fine.. I only see 1 control panel in the center of the rear of tv.. could this be my problem???
Ответитьi have no standby light removed cover tried to ck power fuse first no fuse visible where do i go next tv t22b350n 21,5 made in 2013 hd 585 576 7654
Ответитьhi, thanks, how to remove the cache from the TV?
ОтветитьIt is a samsung un50mu6300f.
ОтветитьMy tv comes on but the picture "jumps" then looks ok, then "jumps" again. Is this fixable ?
ОтветитьI have a samsung un55nu6900f and it has stand by light on but won 't turn on.I can get it to work if I PRESS AND HOLD the power button on the tv itself. I can hear a squeak noise while holding the power button .It usually starts after 2 or 3 minutes of pressing start continuously. No other issue with the TV. We leave it on all the time now but it will turn off on it's own after 18 -20 hours.
ОтветитьI opened my tv to check n closed it back it won't start now no display remote is working
ОтветитьVery unhelpful video - nothing about how to remove those PSU boards that are literally glued and have no screws, nothing about how to remove some of the cables that are literally thin paper and easy to tear...... ALSO you sell all those boards, where do you get those boards from ? are these actual Samsung parts, or parts from used TVs, donated parts, clones, etc ? I am skeptic about buying boards from a source that is not authorised or approved by Samsung.
ОтветитьI have a GPX model # 3220 BRS that do the same thing.
ОтветитьHave a samsung 55" 4k that has a blinking red light. Have tried unplugging it for 1 min and removing batteries for 15 sec and holding the power button but to no avail. It only has 1 single board. Could that be the problem??
ОтветитьHi actually in my tv Samsung 40 inch smart tv sometimes there is a white blinking but no image and sound on tv when I move a little it will start it's happening continuously how I can fixed it? Please assist me
ОтветитьSir Yong Samsung ko na TV 40" pag sinaksak ko hinde Mag eelaw Ano kaya sira?
ОтветитьTHANK YOU. This video just saved me several hundred dollars and saved the local landfill from yet another old TV set. Your illustration of what bad capacitors look like was especially helpful—it allowed me to correctly identify the two blown capacitors on the power supply circuit board of my 2009 Samsung LN46B750. After literally four dollars at the local electronics supply store and a bit of careful soldering, it works again! Thanks!
ОтветитьThank you my tv problem is the main board and I ready purchased in your page thank you 🙏
ОтветитьWhat A TERRIBLE Commercial !
Have You Watched Your Own Video ?
If, If You Have ? & You Posted This Video ?
The Obvious Question Becomes... WHY ?
I have problem on power board how to move
ОтветитьSamsung ka pura hi board chahiye mere ko
ОтветитьMy samsung tv UN50EH5000F won't turn on and doesn't have a standby light. Should it be the power supply damaged? Or, what else could be?
ОтветитьAfter a thunderstorm and loose of electric my 55" Samsung TV didn't come on and the light indicating the TV was on didn't light. The TV was off during the storm.
ОтветитьI have a Samsung tv UE40D5520AK that the led keeps flashing and won't start
ОтветитьMine gets as far as the samsung logo then shuts down again , over and over
ОтветитьWhatsapp line please
ОтветитьIf the standby light stays on or flashes the power supply is in protection mode. So there is power but its not switching on the other circuits.
ОтветитьHey I don't have a remote so I don't know how to turn it on
ОтветитьI have this exact make and model and originally figured the power board was my issue as l had not a power/standby lite, no leds lighting, no sound/picture, I ordered the power board and just received it today.(great service by the way real fast delivery) Now with the new powerboard in l am seeing the power/standby lite and when it is powered on l get a chime, the LEDs illuminate momentarily and l can see the indicators on the screen but then it shuts off and repeats this every 5 or so seconds. I can see all the led back lites are working but only momentarily. I have just ordered the main board as l am assuming this is the problem now any direction would be appreciated.
ОтветитьThank you for all your videos. My elderly parents have a Samsung UN55EH6000. The TV will turn on but the standby light will flash 6x. Once I turn the TV off, it won't power on for a couple of minutes and there will be no standby light. Once the standby light appears it will turn on and function as normal. I did replace the power supply board with no avail. Any suggestions? Thank you again!
ОтветитьSometimes the TV powers on, and sometimes it doesn’t respond.
ОтветитьI have Blaupunkt 43/134M-GB-11B-FEGUK-UK
That won't switch on. I can see on motherboard RB148 blown on CB120. can you direct me what resistor I need to replace please
I have a Vitron smart TV. When I connect it to power it just shows the standby light. The output from the buttons pin is 5v but the other output pin for backlights, don't have any output voltage.
What could be the problem
My Samsung won't turn on.
No power no standby.
Yesterday I have make a physical check and see the components.
But Everthing I see is good no swelling capacitors.
Even I removed both board to see if any burn at back. In vain nothing.
What could be the problem. Thanks.
Hello i have a samsung un55ku6290f tv and it powers on and the video will work if i have my game counsel dvd player or cable box plugged in and on when i power it on but theres no sound and i also cant switch inputs with the remote or with ths button on the tv also cant higher or lower volume or get the menu to come up any suggestions
ОтветитьWant to power supply
ОтветитьOn the back of my power board there's what looks like a clear gel is that ment to be there?
ОтветитьI have a Samsung 70” .. I only see the power supply board and main board.. I think my tcon board needs to be replaced but I don’t know how to get to it and I can’t find any videos of how to do it
ОтветитьExcelente vídeo! Thank you for sharing
ОтветитьI have a UN49M5300AF that doesn't work. When first plugged in, the standby light blinks six times, then goes off. The TV won't turn on. I took the back off and checked the fuse, it was good. I unplugged the cable to the main board and the backlight did not come on. I checked the voltage on the four pins of the cable labeled 13v and they all registered a steady 12.74v. No capacitors are bulging or leaking and nothing else is visibly damaged.
I've exhausted my troubleshooting knowledge. Any ideas?
Watt hi g sir thanks for the tips
ОтветитьChanged main board and power board and still no stand by light. What else could it be?
ОтветитьTake a shot every time he says "Samsung LED TV's"
ОтветитьDoes this information carry through to an RCA led tv or is there more or less I would need to know ?
ОтветитьLizard burned under the power supply board.. Now it is not turning on..
Ответить