Комментарии:
Im trying to mod my ender 3 and this was like greek to me i am so confused 😅😭
ОтветитьSorry to chime in late but I recently purchased an SKR v1.3 to upgrade an old tronxy x5s. You indicate that the 2130 drivers need a harness for spi mode. But I thought the SKR board could handle spi mode without a harness.
ОтветитьThe Atom text editor has been sunset. What should be used now?
ОтветитьI have some TMC2100s with the chip on the underside of the tiny PCB. On the upperside of the PCB is no visable metallic material at all. It has the tracks and the silkscreen, but nothing that looks like it's heat conductive. Any ideas how I should attach the heatsink please?
Ответитьdo you have a video explaining skr v1.3 running smoothieboard
ОтветитьHello I own a FYSETC F6 V1.3 Board and a RepRapDiscount Full Graphic Smart Controller and tmc 2208 v2.0 This driver is available in my country is it possible to work with it as I can't get a driver 1.1 The driver is not available in my country
ОтветитьI just went through installing an SKR V1.3 with TMC2209. It sat on the shelf for a year before I got to it. It lasted 3 days then I lost control of the E0 extruder motor (clicking and rocking back and forth). It was not the TMC2209 driver, I swapped it out. The problem seems to be the board itself. Not Knowing Marlin well, I took it on. One day later I am back up and running with the SKR V1.3. I had to redirect E0 to the E1 stepper control, along with a couple other details. I could not find any SKR V1.3 replacement boards available, so I am lucky I found a way to fix it.
ОтветитьI can't find one of the specs. Do you know what is the "largest wire" that can be used to connect +24 to the board?
ОтветитьNeed help config files do not have the skr 1.3
ОтветитьHi
Ответитьthey don't sell it anymore
ОтветитьI think this the way to go for dual extrusion setup
ОтветитьGreat video. Just got one of these boards. This was a big help. Thanks for your time.
ОтветитьAre you still on this channel
ОтветитьI just changed the end stop plugs for 3 pin cases
My ocd dont like 2 pin plugs in 3 pin sockets
Grab a set of all sizes for virtually nowt on ebay
I fucken hate ur videos, you say set vref to 1.1 but never explain why. What the fuck. That is not teaching man. That is just shouting instructions. You don't really want us to learn do you.
ОтветитьNo fan, bed heater definition, nothing og that sort jn the pins.h file :( did sb fucked up marlin. What the fuck do i do now????
ОтветитьJesus christ, why don't you show the changing of drivers in the config? This is useless
Ответитьin linter error this appears 'error GCC missing binary operator before token "(" ' i very new in this. what do i do ?
Ответитьi have an skr 1.3 with 4 of those a4988 and an original screen but i cant get it to work if enyone can send me there bin file for ender 3 with original screen it would be great
ОтветитьI didn't realize he called the Z axis Zed. Didn't realize it was a zombie all this time....lol
ОтветитьBig mistake buying this board. Especially if your not using it to upgrade the Ender 3 exactly as explained in this video. apparently its catered to just that and maybe only that. its loaded with issues. This tutorial is very limited and the chances of it working as shown here are probably 10:1 outside the Ender 3. Support is painfully limited. I had so many issues that I bought a second one thinking maybe the first one was defective. The second one behaved different from the first but still could not make functional. Endless waste of time trying to make it work. Totally regret buying it.
ОтветитьYo dawg you need to redo this tutorial for the updated shit.
ОтветитьPlatformIO is no longer supported in Atom. Must use VSCode :(
Ответитьyou Don't say that Downloading and install takes Hours!! for Platform IED Atom says it is installing but I think it's just Spinning..
Ответитьender 3 files are currently unavailable.
ОтветитьWhat do I do when the config folder of marlin is empty and I can't copy the two Ender 3 config files?
ОтветитьThe config files are missing for the Ender 3
Ответитьin the config file there is only a Read me MD file. is this guide still good.
ОтветитьWhat does a 32bit board give you? Does it lead to more accurate movement or is it the fact that it can support better stepper drivers?
ОтветитьVery interesting. Im looking into doing an upgrade like this on my cr-20. Just cant find any info on that.
ОтветитьI cant find the folder with examples
ОтветитьI've been following this guide for my ender 3 pro (with skr 1.3) and got blank screen on my stock screen. Any ideas?
ОтветитьLotta Info to take in, question? Why does your printer have what looks like a Raspberry Pi board also???
Ответитьhaha jokes on you I put + and - the wrong way trying to fix it and now it doesn't even turn on like everything I try to fix lol (help)
ОтветитьGreat video. The only thing i would recommend to people a year later, is to check out Marlin-Configurator by akaJes on GitHub. Saved me a ton of headaches configuring marlin for my CR-10.
ОтветитьI bought the BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board will your instruction still work for me to install this on a CR 10 S4?
ОтветитьOK, so where did you get "the rest of your arduino files" that you added your Marlin files to?????
ОтветитьAtom is no longer supported by PlatformIO, Visual Studio Code should be used instead!
ОтветитьI always get "tmc connection error". Im using 2100 drivers and scoured the whole internet, but can't find a solution for the 2100 drivers. Can anyone help?
ОтветитьI wish I could give this a try, but my Atom is stuck at the PlatformIO IDE installation. And the PlatformIO support says that Atom has been deprecated, that we should use VSCode instead...
ОтветитьAfter having 2 boards that shorted. I will say that the engineering that went behind SKR's is shit
ОтветитьHey everyone. thanks for the video. my printer prints perfectly and is super silent only I can not control the printer via USB with prontoface or octoprint. how come this is this a firmware setting i forgot to change. or is it due to the SD connection that I use for printing? thanks already keep up the great work
ОтветитьHi!
What brand/model of motherboard would you recommend to replace the stock one that comes on the ender 3 pro?
I'm bettewen the MKS Sgen L (32 bits) and the SKR V1.3 but i can't find reasons to decide me what to choose
I have seen on your channel that you have tried several boards and perhaps you can advise me.
(I am a beginner user in 3D printing and have barely tried different components)
Literally so much stuff missing from this guide.
ОтветитьThumbs up for Klang xD
Ответить