Комментарии:
That unit has much less rust than mine did.
ОтветитьSo are you upgrading?
ОтветитьBlah blah blah 🙄get on with it people know infamous Nissan 😆🙄no one wants to hear a life story
ОтветитьLuk works good.....Sachs does not include bearing installed on clutch sleeve....... It came with the bearing but I could not install it and neither could the shop.....
ОтветитьThis exact thing literally just happened to me
ОтветитьOMG ty! Trying to restore my dad's datsun and ran into this problem 😑
ОтветитьPulling a transmission on a 91’ Hardbody that sat for years in a field in Louisiana. It’s far enough off the dowl pins, about 1 inch from the engine but doesn’t want to separate. I think it’s rusted like yours was, gonna keep prying and pulling. Thx for the vid
ОтветитьHi I daily a 86.5 D21 and have been working on a 88 WD21 thanks a lot for making videos to help me and others out.I have gotten a ton of info here. I posted a couple vids to show my progress Thanks again.
ОтветитьSlave cylinder can make ur clutch hose twisted...when tight......also can leak thru threads
ОтветитьBro Is that the Omnitrix?
ОтветитьThis just happened to me today, luckily I have a stage one clutch on standby. I knew eventually the stock clutch would go since I drift mine. Lasted longer than I thought. Thank you!
ОтветитьAwesome video!
Thanks
A wealth of information! I didn't get it all in one viewing and plan to watch it again when I haven't already had a beer. I have a roughly similar problem, but I suspect a different cause. Still learning.
ОтветитьThis happened to me and I had shifted through first after a jump started dot-dot-dot I replaced the master& slave cylinder and it's still acting funny and neutral but it goes into first and sounds kind of weird so I'm I'm expectint what you're going to say
ОтветитьI am having the same problem. Thanks for the info. Where did you get parts? I have a 2.7 diesel engine.
ОтветитьLuk not good update😢... It gives a clutch fork vibration which might introduce air into the system through the slave cylinder I've had to bleed my clutch system every 6 days for over a year now I don't think it has a leak gonna check I rebuild the damper With 700 PSI gasket maker versus Kim
ОтветитьEverything on my 96 stock nissian hard body just recently started to go 35 mph in 1st gear anybody know why?
ОтветитьI have an 89 d21 we were driving and all of a sudden fourth gear just pops out an it’s hard to get it back in gear
Ответить