Nissan Pathfinder R51 Lift

What is your pro comp wheels model number?Nice set up bro

What model number or part number of your rims?

I have a 2019 Pathfinder Rock Creek Edition; I was wondering how it would look with a 2" lift and off road tires; and after watching your video, you've given me a pretty good idea of what it could look like...Great job on the video!

Are you selling the rear lift?

Please text me 214 551 4276

What's the length of the new bolts and pitch

Hey thx for making these videos.
Not sure if you have answered this before but can you spec the bolts that you bought please. Im going to. Dot he same rear sub frame lift as you! Thanks a bunch!

Where did you get the longer bolts

Beautiful Patty you got there my man. Cheers to the last good pathfinders out there.

Putting on tall mudders do you have too change the gear ratio too have a decent speed and ride

did you seriously just make every knife cut towards your body??? SHEEEEESHHHHH

its about dam time i see a r51 video lol now you have convinced me to do a 2 inch lift. very nice! i have a few questions though. with the puck up front do the control arms contact the coilover cradle? also what are the specs on the longer bolts for the rear? length and thread pitch.

Hi Dan,
I cannot seem to get the rear properly aligned. I've replaced all the rear suspension components UCAs, LCAs, and spring buckets, getting new rear CV axles replaced tomorrow as one of them is leaking and both boots are heavily cracked so time to replace.
My current setup -
SUSPENSION:
Front - Supreme Suspensions front leveling kit for (2" Front Lift Aircraft Billet Strut spacer kit)
Rear- Rancho RS70077 coil spring spacer kit (1.75" lift). Brand new Moog 81119 coil springs. Air lift 1000 suspension kit 60810.
Gabriel G63875 shocks for '06 armada

WHEELS & TIRES: Pro Comp Alloy wheels Series 89 (16" x 8", 6lug x4.5" pitch, -12mm offset). Pro Comp 11124 lug kit. Thunderer MT 285/75R16

Any suggestions/ideas to get alignment dialed in...?? Thanks in advance!!

Did you face any problems with rear diff ? I lifted mine and after alignment the rear right short axle of the diff went out a bit and because of that the ABS sensor not reading anymore. Any solution?

Wanna know how's its holding up still in the rear

i have the 2007 and will start to build it like this

Can i ask why did you go to all that effort with the tubing in the rear as opposed to getting both front & rear spacers? Is there any advantages to this method of lift? I suppose you could combine the two & get a 4" overall lift, but then i'd imagine you'd have to start worrying about control arms & cv angles

Amazing 🥳 I wish I could do it myself

Hi . Awesome video. Did you change the bolts for longer ones?

Hey man. I am wondering where u buy the bolt from for rear. Great video. Been long time I wanna to lift my pathfinder. But watching your video DIY made it easy. Thank you.

Did you have to loosen the rear sub frame off on both sides or did you do one side at a time? My pathfinder looks a lot like yours except much more rust colored underneath. I live in Canada and its not quite as easy getting some of those bolts out. Thanks for the videos they're a great help!

Una pregunta maestro la Nissan Pathfinder 90 mueve bien esa llanta

Late to the party, but I have an R51, 210k(owned since it was new) and with basic maintenance it has been a great truck. Just drove it across the US, no problems at all. Still on the fence about modifying it, but since it’s not a daily driver anymore, you have given me something to think about. Thanks!

You are doing the car god's work my friend. Especially the part where you took them "rims" off and gave it some propper mudders. Currently researching doing this for the pathfinder's big brother, the kit is crazy expensive and I don't see why I can't do the same thing you are doing right here. Maybe plate the ends of the box for a little more strength so that it doesn't diamond but it's unlikely that would happen anyway. Great video, thanks!

Hello there. After few months or a year, did you have problem with the rear lift??? Did that 2" lift at the rear make any kind of problem???? Thank in advance....

What’s the exact tire size?

Hi. What tyres you use?

Great Video Man..
Very Informative.
Looking to do Same
On My Xterra..
How is it Holding Up??
Do you have Any Regrets??

Did you put the sway bar back on?? What size botls you used?

Hello. If I use a 2*2 tube for the rear subframe, how high should the front spacer be? I already have iron man +2'.

Looks awesome. When you did your "puck" lift in the front did you experience any knocking with the top of the strut bucket and control arm?

Definitely not underrated…
Bought an 11’ with 184k miles just recently. Tons and tons of rust, typical Nissan rust proofing (or lack of). Plenty of electrical issues, clunks and rattles. Compared to a 4Runner it’s an absolute pile in every aspect.

I have a 2001 Nissan Pathfinder LE 3.5 in northern Mexico, it works very well, greetings to all

Awesome video , I have an 11 same color , but I’m here in Ontario Canada, ( salt belt) and would like to do it but a little concerned if I’m going to encounter frozen/rusted /broken bolts ?not sure your location but it looks warm , maybe I’ll give it a try

That's a nice looking R51!

What are the specs on the rims? Width, offset?

Certainly, one way to lift a pathy

Do you need to change your front upper control arm? I saw that a lift spacer would not work because of the control arm hitting the base of the spring

where is the car? i can't see

What length did you cut the 2" tube also what thickness of it for the rear lift?

Sow let me get this right! You lift the subframe by 2 inches or 50mm in the back where this lift does nothing to raise the diff or the suspension arms basically just a body lift and in the front you add a spacer that modified the suspension geometry basically lifting the suspension. Sow back is a body lift with no added ground clearance and front is a semi proper suspension lift? I hope people don't do this mod as it's stupid. Folks just buy the kit with the poliuretan flanse for the back coils and then you will have a raised back diff also.

Saludos
Pura vida 🇨🇷

Sua camionete nao ficou balançando de um lado para outro passando rapido em desniveis

How did u find the bolts?????

I hope you’re still active here.
Where did you source the longer bolts for the rear?

Hi there, are you used same bolts for the rear subframe or longer bolts?

Hello, will 33x12.5s fit? Is that what you have? I'm gonna lift mine 2 inches but want some really meaty tires for my 17s.

What bolt did you use in the rear