Комментарии:
Hi, I am connecting Monitor and FOH to two x32 console as per your video, the only different is I have 2xS16 rather than 1xs32. The main console I connect it to port A of the first S16, port B of the first S16 then connected to port A of the second S16, then port B of the second S16 is then connect to port A of my monitor console. All my console light lit up green, however I am not getting signal into my monitor console. My main console have signal. Can you see what is wrong with my connections. Thanks
ОтветитьHi ! If i link a Dl16 with a DL32, Does this method still work or would I only receive inputs from the dl16 ?
ОтветитьUhm....nope. only the gains are controlled. And thats why this type of videos sucks. I dont want the main in control of my mon gain. And i dont want my mon in control of my foh gain. So i still use the old school analogue split to seperate them for 10 years now......
ОтветитьHow would this work if we use M32c w DL32 for our IEMs? Should I go FOH AES50 A to the DL32 A, Then FOH DL32 PORT B to our DL32 B..but in order to use our M32c to mis our ears, could I then go from our Dl32 A to M32c A??
ОтветитьI did more simple....I use M32 in stage as monitor mix and another M32 for FoH mix. All input are going to M32 in stage and all output for PA and monitor coming from it. I use 2 Main out to go to PA line array and 1 out more for PA subwoofer....7 out for monitor wegde and 6 out for IEM. In this case I use sharing mic pre....monitor mix will control all mic pre gain....and the FoH mix still has digital gain control....
ОтветитьI have a set of Behringer S32 Stage Box in my hand, suddenly there is no response from 1-8, and 9-32 are all normal, do you know the problem?
ОтветитьM32 praise
ОтветитьDon't mention the gain?
ОтветитьDude needs air quote lessons.
Ответитьhello from mexico i already have 2 behringers wings and 3 stage boxes sd16 and i cant meke it work together as foh and monitor can you help guys with it? thanks
ОтветитьCan you do this without a digital snake
ОтветитьWould be helpful if you explained the cable and connector type as well
ОтветитьCan you say If the Behringer s32 is compatible with the Midas m32/r?
ОтветитьHow do the routing with 2 DL153 instead of DL32 please ?
ОтветитьSay you set the M32 to be the master (internal) and connect it to the DL32 with a digital snake, will the DL32 automatically detect that the console is the master and then become a slave? Or.. must you manually set the DL32 up with rotary dials to become the slave? (provided that it wasn't already set to slave mode out of the road case from some previous show) With the S16, you must manually set the stage box to either master or slave regardless of what the console is set to.
ОтветитьOur church has M32 and DL32 as well, and we want to setup in ear monitors for the musicians and vocalist. Can we get away without an additional on stage monitor?
ОтветитьHow can I get it downloaded to my phone?
Ответитьcan we doing same thing for the wing console...
ОтветитьIs this the same process for the X32?
ОтветитьCan I bypass the stage box and connect the two consoles with a Cat5 cable, 1 for FOH CONSOLE and the other for Live Stream CONSOLE and will I be able to add effects compressors FROM the Live Stream CONSOLE going to the stream ?
ОтветитьCan you do this with local channels and not use the digital snake.
ОтветитьHi Midas please make us another video that will explain us about outputs and gain control in this split configuration so we will be able to understand how make the setup process thanks
ОтветитьThe whole reason I like a separate monitor board is separate gain staging for monitors verses FOH. If they share the same pre amp and gain stage I do not see the point.
ОтветитьIn this setup, is there a way for Gain to have the stage console??
ОтветитьThanks erick
ОтветитьIs it possible to have the 3rd console? So there are 1 DL 32, and 3 units M32. Thanks a lot.
ОтветитьAlright guys, this is what I need to do but I can't find answers as to whether or not it's possible: We have M32R at FOH currently and DL32 backstage. Love the setup, but want to add M32C to be used as the monitor console. What I want, is to free up all 16 mixbusses on my FOH console, and instead use the processing/mixbusses on the M32C for monitors, but I need all my monitor mixes to come out of the DL32. If I do that, where do I output my LR buss from to go to the PA? Do I need to pickup a second DL32???
ОтветитьIs there a chance to get a MatrixMix or a MainOut Signal from M32 to the M32R. I want take the FOH Main Signal for my Inears Monitors ?
Ответитьlol what about outputs
ОтветитьIs there a way to send individual local channel direct outputs from the M32, to the outputs of the DL32 on stage?
We use a Movek MyMix IEM system, which can take input via ADAT or analog.
Since there are no individual channel outs, I thought to use the ADATs on a stage box to do it, but the routing would have to allow for it and I’m not sure it does.
As an alternative, what I have to use 16 aux sends for this, and even so could I do that? Or is there just no way to get channel direct outs in this fashion?
Is there a way to do this WITHOUT the DL32? I noticed nobody answers any of the questions below, so I will probably not get a response, but it would be nice to know. Thank you.
Ответитьwhat can i do to control all the channels if i connect a Midas 32r to the DL32 stagebox B into the A of the Midas 32r? Is it possible? Can i use a dante splitter to do so? or what options to i have? Any help is greatly appreciated.
ОтветитьSo there is no way for your monitor console side stage to run monitors out of the stage box .. I can only seem to have them comming out of the console itself. Now I have to run another damn snake onto the stage or to my amp rack for monitors. Is there a solution
ОтветитьCan you provide details on how to hook up an M32(FOH), M32R(Mon) and 2xDL231. We want 32 channels to be used with independent gain controls on both consoles. Also would want all outputs coming from the stage racks. Is this possible?
ОтветитьCan you show how to split outputs. Like 1-4 for FOH and 5-16 for Monitors... thanks
ОтветитьWe are seeking to do exactly this EXCEPT with a M32C in place of the M32R shown here. MY QUESTION: Can the bus outputs of the M32C be mapped to the physical XLR outputs on the back of the M32 console, while the bus outputs of the M32 console are mapped to the XLR outputs of the DL32? Is that level of swaparound possible, or will the M32C require its own independent DL32?
ОтветитьSo in essence the consoles are mirrored correct? with the exception that the gains and outputs are controled by the console clock set to 'internal".. both consoles should be able to make changes to any of the busses, eq's etc.
ОтветитьHello, I have already a Midas M32R and a DL32. I wish to buy a M32C. Kindly send me in details how to connect both consoles to the DL32 and use the M32R as FOH and M32C for stage monitors. I want to separate the controls, having for instance 8 outs dedicated to the stage controlled only via the M32C while the others 8 outs are being controlled separately by the M32R FOH with another sound engineer. Your kind help is appreciated.
Ответитьhow about splitting for another aes50 console for broadcasting
ОтветитьHow do you lockout/Restrict band members from have access to their individual in-ear monitor mix 'BUS' so they can only access their own mix and not mess with the other parts of the console/Mix on the X32/M32 Mix app?
ОтветитьIsn't the M32R just using the input channels of the DL32 and using the physical outputs for the monitors from the M32R?
ОтветитьCan you guys do something crazy with this? I'd love it if when I did this that whatever I name the inputs on my FOH Mixer that they'll automatically match what is on the Monitor mixer. If that's doable. Say so! If not. Make it happen! It would make things just that little bit easier.
Ответитьthis wouldn't allow redundancy in the case the FOH mixer would go down, correct? Is there any setup that would allow that short of hotswapping the AES50 ports? this is assuming that nothing is directly plugged into the FOH and output is going through the stage boxes
Ответитьwe have the same setup, m 32,mr32 & dl32 - where not getting any outputs of the dl32- ch1 through ch12 (monitors )... where ch14 ,15,16 does have output for main....1ch through ch12 is assign through mr32....we check the routing menu...but still no output ,only local from the mr 32 desk itself...any help with the routing would be appreciated...thanks in advanced
ОтветитьThe outputs are not controlled by the main console, ONLY the GAIN, i have 2 Midas and a DL32 stagebox if you want separate control of GAINS, use an analog splitter snake
Ответитьbut how am I supposed to be able to use my M32R for monitoring if the outputs of the DL32 are being controlled by the M32?
ОтветитьHi Midas, what is the gain control like when setting up the consoles in this manor? For example, do both consoles have full control of their gains? Or does the FOH console have full control, whilst the monitor desk has none?
Ответитьvientos asipara sacarle mas probecho a la midas
ОтветитьHi midas.
I have 2 midas dl153, what will be the Best way to setup foh and monitor up with the 2 stagebox??
Best Regards:
Søren