Тэги:
#Wampler #pedals #guitar #fender #gibson #ibanez #telecaster #stratocaster #les_paul #catapulp #chasing_tone #overdrive #distortion #effects #FX #effect #loop #hot #rod #deluxe #hot_rod_deluxe #faux_tape_echo #tc_electronics #hall_of_fame #reverb #effects_loop #how_to_use_effects_loop_on_amp #guitar_amp_effects_loop #effects_loop_vs_direct #fender_hot_rod_deluxe_iii_effects_loop #effects_loop_explained #effects_loop_in_guitar_amps #fender_hot_rod_deluxe_iii #fx_loop #using_effects_loop_on_ampКомментарии:
To me, it only matters a lot if you plan to use the drive from the amp. I tend to set my amp clean and use pedals for dirt, so there is not much difference to my ears that way. Dirt before other effects into a clean(ish) amp.
ОтветитьI hate when videos edit out the dead air like this. Just sounds terrible and ruins the cadance of the video
ОтветитьDidn't always have amps with effects loops ... do now. I agree it is the way to go, for a variety of reasons. It's also a great place in the signal chain to place a low impedance volume pedal.
ОтветитьWhat is the brand of pickups again?
Ответитьthank you for interesting and informative.
ОтветитьYou give great easy to follow demos and explanations. Much appreciated my friend :)
ОтветитьGreat info and nice licks Brian!
ОтветитьSo you run the dist 1st then your echo,then reverb through fx loop? And just run guitar in input ..
ОтветитьI am very appreciative of your insight. The Equator is great 👍
ОтветитьWell if you have a multi effects processor, I think running straight into the front works best. At least if you can either change how the different effects run in what order, or if the processor designers have already done this for you. However, I agree if running individual pedals. Most distortions and overdrive pedals through the front and your modulations through the effects loop. Thx for the vid man, great content as always ! 👊
ОтветитьThanks for the video. I kind of like the distorted modulation sound sometimes lol.
ОтветитьDoes the loop on the hotrod deluxe mark 4 only work with line level fx? I find my mxr cc mini sounds weird through it,
Ответитьi got a tone suck if delay is plugged in fx loop, the distortion becomes thinner
ОтветитьHa, exact amp I just got! Sweet.
ОтветитьI've got an FX loop on my amp, and I've used it, but lately I've just been putting everything in the front of the amp. It's what I want of my sound right now. I want the dirty delay and reverb that sounds pretty messed up when pushed a lot.
ОтветитьCool explanation - thank you!
ОтветитьReverb into distortion is one of my favourite sounds... maybe I should see a doctor.
ОтветитьA question: how do I know if a pedal is able to accept a line level signal from the send of the amplifier ? Some "pro" effects units like the Eventide reverb, delay, mod units for example have a specific switch for it.
ОтветитьIf we don't use distortion or use the amps distortion than is it better to use fx loop or just frot of amp?
ОтветитьI use it when my amps preamp sound like shit, wich is always.
ОтветитьI normally enjoy your videos... This one's way to busy with so much for the listener to try to keep up with. You're all over the place throwing pedal types and names while jacking around way to much... Let me please remind you about K.I.S.S. Know that this isn't hate mail, but creative feedback. I felt like you were on your 5th cup of coffee. ✌
ОтветитьAre you going from your first amp into the hot rod deluxe amp
ОтветитьAm I the only person who hates the hall of fame reverb ? Everything TC makes is good. But the hall of fame is so digital. I’d get the mxr or boss before the hall of fame. Thank god I have a big sky tho❤️
ОтветитьPerfect video. I bought the hot rod 4 last week so I've just been looking up videos such as this (: thank you
ОтветитьI watched a few videos before this but still couldn’t quite grasp the concept. Thank you for your explanation and audio examples, it was great to be able to actually hear the difference!
ОтветитьMaybe me, but I feel your vids are a little drawn out, not with facts, mind, but just some rambling.. and with THAT, one misses most of your "comparisons".
ОтветитьThe catapulp sound tasty
ОтветитьWhat if I’m using a multi
Effects board like a line 6 or helix?
What should you do if your amp doesn't have an effects loop? I just bought a 65 reissue of a Princeton Reverb and it doesn't have the fx loop.
ОтветитьWill it also work fine if you just put all your pedals in the effects chain?
ОтветитьNothing worse then a "tip" video and all a guy wants to fo I'd jam.......
ОтветитьBrian, why are you using your wife's coffee cup (says "The Boss)? Lol
ОтветитьSo pre amp out is the start of your pedals?
ОтветитьYou can keep your name brand Fender junk. I prefer a Crate Power Block 150 watt amp head which, by the way, is a stereo amp head, far superior to your Fender crap. With the Crate you can put two effects in separate loops of the stereo effects loops. You just have to use two TRS 1/4" to Y mono 1/4" jacks, i.e., one for each side of the stereo send and receive. I also use an Ibanez guitar which I consider superior to a Fender.
ОтветитьThe Catapulp is my fave.
ОтветитьMud is clearer
ОтветитьThanks that helped a lot actually. I need to buy 2 more cables now for my loop
ОтветитьSo I can leave the front of an amp not plugged in and I can hook my guitar up to a distortion pedal and into the effects input only and the amp wont pop like when u accidentally unplug a guitar into the front after u turn it on? Just making sure I can leave the front unplugged and plug into an effects loop
ОтветитьYeah🎛️
ОтветитьBut is the distortion pedal gone through the loop aswell?
ОтветитьHey Brian, any reason why you've got the dirt before the tuner?
ОтветитьI use distortion, delay and reverb , and added a looper which forced me to go back to using them all on the line in because the recorded track sounded too different using the loop pedal actually sending signal thru the delay and reverb a second time during play back thru the effects loop, so im strickly using line in on clean channel
ОтветитьIt's the same even if you're using the clean channel right ? Like you would still want to go thru the effects loop even if you are on the clean vs the distortion channel?
ОтветитьWAit, are you the ACTUAL FUCKING WAMPLER DUDE?! I have a Dr. Who and it is my favorite pedal of all time. If you're sneaky, and you want to sound like a wizard, the Dr. Who will totally do that. Fuck me. Are you ACTUALLY Mr. Wampler?!
ОтветитьI need an amp just to record songs with a mic on it, using the amp on Clean.
(the distorsions will come from pedals before the time-based and modulation stuff)
So, I won't need a fx loop, right?
I mean, there won't be any Gain or crunch coming from the amp in the first place and I won't use it very loud since I'm recording with a mic
Do you go delay into reverb or vice versa?
ОтветитьMy Line6 UX2 puts my gates in line for me, as I want them, on my computer. My looper is first In line, no noise. That why I like my stuff? I Have my old pong pedal in a gig bag that's my last pedal in line. No right or wrong, just new Idea's to try for affect for your fan's. Thanks for your Ideas, will try that✌😌🎶 Cliff Campbell
ОтветитьSo, mr Wampler, do you ever knock over one of those pedals on the shelves and then they all come tumbling down like it was raining expensive colourful dominoes?
Ответитьhey... what about guitar compressor? should i put in fx loop?thanks
ОтветитьReal late to the party, but I need to say this video is probably one of, if not thee most easy to understand explanations and demonstrations of the often misunderstood, and misused "effects loop" feature. Love Wampler pedals too!
Ответить