Installation of Reversing Camera

Thank you 🙏 very informative

Fantastic my friend

Whats a canbus

Incorrect. The read wire needs to be connected to the reverse bulb. Not the rear tail lights.

How do you know if it's a man or female?

Do i have to ise a trigger wire or can i find another power source

That black wire

I connected everything as per the video, except that I did not connect the red "power" wire to the tail lights, but to the "back up" lights instead. I did that, because the "back up" lights only get power when the car is put into "reverse." Since I only want my rear view camera to work when my car is in "reverse," I thought that this is the logical way to do it. Well, why am I getting a "No Video Signal" message on a black screen then? Any advice?

Ezzy pezzy

4 hours of swapping connections …then I find this 1 minute video🤦🏾‍♂️. Thanks for posting.

from the tail light? or from the reverse light? please enlighten me

I hv a dbt...if am using a dvr camera in the rear...from where i can take the postive connection..bcz the camera should be on all the time with the car

ممنون. خيلى جالب است.

Excellent video. The only one that I found that says that we don't need to connect to the tail light cable if there is a canbus present. Finally, It made my reverse camera works perfectly. Thank you.

hey, what is a canbus, and how do I know if my car has it?
I own suzuki swift 2013
thanks for the video btw

Please help me. I want to connect an aftermarket camera to my gm volt 2017. On the car I have 5 wires, the ground (back) and the positive (+12v in pink) and I also have red, yellow and white. I cut the aftermarket RCA video cable and inside I have red, yellow and back wire. Someone can tell me how to connect this?

Thnks brthr

Thanks bro! It worked! I love the short and straight to the point video.

Nice video, but what about cars with Canbus? Where are we supposed to conect the camera if not like shownbon the video? 🤷‍♂️

I can weld anything! but being Colour blind sucks when wiring shit up!!
I’ve got no idea!!!

Hello my camera has the led lights working but stereo isn't switching to camera view.i didn't install it so no idea what to check

Hi im currwntly wiring it like this, but i also want a switch to power my camera whenever i want. Any smart methods to get power from a second place without interfer with my tail lights?

my existing wiring does not have an rca jack. any tips on splitting the wires so i can just replace the camera ?

If I have the canbus should I still connect the ground wire near the camera? Thanks!

By far the shortest and clearest installation process video. No jib jab or bad camera angles, just a nice clear diagram, thanks!

Why i didn't connect to tail light if I have canbus?

Advice where is nsdd 62 reverse port

Where to connect the black one

thank you!!!!!!!

Very Helpful Thank You

Thankyou