Everlast PowerArc 200ST Demo (6010 and 7018)

How much can i order help me bos

What country is this machine made in?

200 st, you were at 95 amps. looks like the st140 would be fine

you had undercut the whole way down the weld......!!!!!

What’s that plug in you used on the 6010? Doesn’t they both run on DCEP?

Not sure about these inverter. I run 6010 using Lincoln AC 225

this or a Lincoln 225 tombstone ac/DC?

I have one, the stick mode is trash. I do everything in Tig mode. Even 6010. Actually me and a buddy built him a new welding bed with it off 110v with 6010 because we were in a residential area and didn't want the neighbors to call in noise complaints. Initially I was disapointed but I've adapted to it.

I’m sorta narrowing my choices. I want to learn stick, have mostly small self projects. I was leaning towards the esab 180 ($600), someone suggested the everlasting 200.
Can I get your opinion on which one you think is the best at the $400-$700 range? Thinking they’re all good, but your opinion, the very best.
Esab rogue 180,,,,, everlast 200,,,,, Lincoln (don’t know equivalent model),,,,,, Miller thunderbolt 160,,,,,, Miller thunderbolt 180
I’ve seen you use a lot of them, your opinion would help a lot. Thanks!
Seen vids on the esab rebel and the fronius transpocket 180. Those two seem above all at the $1200 range, problem is ...the $1200!
I was leaning towards the rogue and everlast. Only $200 difference. But got to draw the line somewhere. Thanks for your vids!

producer michael

That machine also has adjusted arc force and hot start

I like the size and the power it can actually put out being so small gotta love technology I could use one of those

One of the best compact stick welders out there.

They did a remake on this machine and the called now powerarc 200 sti but I can’t get it to work with 6010 can u help me out

The new version I have just has a button for the 6010 and it’s a good machine and works. Haven’t had an issue with the machine, only my generator which can’t keep up with this welder. 5k generator and this little guy is pulling it down till it dies. Wish I could really try this bad boy out at 200!

Titanium from harbor freight has same thing but 225 amps also will run 6010 for 250 bucks better value than this machine

Great looking welder there Bob. Thanks for showing us what it can do.

i like it , do want to get into welding trailers for tiny houses , been watching a lot of welding video on the tube, welders seem like heads up people . thanks for posting this ever-last 200 unit its top on my buy list now at 350ish! arrest hillary!

Hey bob do you think this machine is good to practice on pipe welding? And would you use it on welding pipe?

I have the first gen of this machine (minus the "ST") which does stick only. I like it, and it seems durable. (As a hobbiest, I've put in probably 20 hrs of arc time over several years.) BUT when I run 1/8" 7018 it seems to need 150A. I would probably short sell Miller, if it was a pure play. I always run it off 240VAC.

Can you try this machine on pipe with tig please ?

Can you do tig with dc- tig

Can this machine will work good for learning on plate and pipe ?
I’m barely learning ! Thank you

aluminum can be welded with the Everlast TS200

I WILL NEVER BUY AN EVERLAST MACHINE!!! They bought one at work and it lasted about 6 months till it didn't want to start an arc correctly, and about 8 till it would only start about one of 12 tries....and when it did it would cut off in about 3 seconds. I called tech support and they basically treated me like I knew nothing about welding. Of course they didn't know I have over 30yrs experience, 29 as a jouirneyman pipe welder. The guy insisted I turn postflow down to .2 seconds, and my argon from 30cfh to 20cfh. I couldn't get off the phone with this moron quick enough. Then the other day, I ran into a Neverlast rep on Facebook. He didn't spend any time trying to resolve the problem, but instead called me a liar, insulted my experience level, told lies about me, then removed all his posts and blocked me. Very rude, condescending, and unprofessional. His name was Mark Lugo. In short, they have refused to help remedy the problem with a machine that is still under warranty.

I have the same machine i love it very powerful little welder

I have this machine & to run 7018 properly I had to flip the switch to Tig and it was night and day difference I think that's why you had to run such low amperage with 1/8 7018

Thank you very much Sir for your fine video! In your opinion, being that the 10’ leads that come with the welder are too short for my needs, could it handle 100’ leads?

good video , so many arguing for transformer welders , saying inverters don't deliver like trans stick welders. I qualified 6G on 6in pipe with a maxstar 150 Some yrs back. This 200 st is tempting . The little blue machine doesn't like 6010 .

I know I'm pretty late, but I've been looking at reviews on this machine and I'm really liking how this thing is being rated as. But I'm caught between this and the 160 sth. For the price, on a budget which one should I get?

I just bought one and it works great

I have it and I tried it with a multimeter, in stick mode it delivers 30 amps over what the screen says, up to 45 with a short arc, but this only with 7018, with 6011 and 6013 are 15 to 20 more and up to 35 with a short arc, yes, I tried it several times and the result was always like this, in TIG mode the screen corresponds to the multimeter.

I had turned my 200 ST down to 87 to run Radnor 1/8” 7018 but Thursday, I took it to the tech school where I’m n my second semester and my instructor, a 32-year union man, started welding with it and had me keep turning it down to 72 amps. He then got our Millennium rods and found that they worked best at 74. He brought a couple of 5/32” 7018s and had the machine turning out beautiful beads at 105 amps.
He told me I had a fine welder.

Great looking welder for the money. It seemed like a much bigger unit in the pictures I've seen.

Merry Christmas Bob, question. I like this machine, i am looking at the 140 and the 200st machines. The 200 requires you to purchase a tig torch at $112-$159 in addition to the machine. The 140st comes with the torch and carrying case. The 200st has more amps and will weld the 6010 sticks. Do I need the bigger machine? I'm a hobbyist. Keep up the great video's.
Show less
REPLY

Does it run on a 30 amp or 50 amp breaker?

110 most people buying this machine will never run it on 220v? this demo should not have been done in 220, someone buying a 300 dollar machine dosent have a 220v outlet most!

Very nice stick welder. I can't believe how compact it is.

I want to see you do a plate test with that welder

Just ran a root with ER70S 2 @ 60 amps , this first pass couldn't have came out any better

i HAVE NOT RUN ANY 6010 ON MY 200ST, BUT IT WILL DO A GREAT JOB ON 7018 AND 6011.
TOM

I'm amazed at how such a great stick welder can be made so compact.

What's the most amps it will run on 120v?

Could you please test the Lotos LPTDC2000D? It’s a multipurpose welder incorporating TIG, Stick, and Plasma Cutter. I’m considering a purchase of one and would like to see it being used by someone that knows how to use it. Thanks for all the good videos. I have learned a lot from them.

Can you make a video about aluminum mig flux core innersheild wire? Recently heard about this stuff, lincoln electric sells it. Really wanna know what its all about

Could you do a Tig and Stick demo with the everlast powerarc 160 STH?

Very curious what the current difference was between the two rods. I seem to recall guys running 1/8" 6010 and 3/32" 7018 with identical machine settings.

except you undercut the 6010 weld Bob :(