Комментарии:
I also have a Deore XT M8100, but I have the impression that the shifter has a long travel compared to the M420. The brake is new, bled, but I didn't drive it because there was a lot of snow
ОтветитьHi, love your review. I have a pair of 8100, can I use i-spec II adapter with them?
ОтветитьDoes you lever push outwards abit ive just bought one and mine does isit normal?
ОтветитьI don't know if it has already been said, but with the new XT brakes 8100/8120 it is not necessary to unscrew the screw plug and the olive. It is enough to put the sleeve in the pipe and then simply remove the yellow plug from the screw and insert the pipe and screw it tight. That's it.
Ответитьhey cool video but how did you integrate the sram shifter and the xt brake? thanks
ОтветитьCan you use the new front brake EV system with the Shimano XT M8000 I-Spec II if not is there an adaptive for the 11-speed shifter ? Thank you for the great info but it didn't answer what I needed to know.
ОтветитьThe lever blades are interchangeable I suppose?
ОтветитьFlo Motorsport 120 MTB lever blades. Check them out. Can upgrade these brakes with better quality/stronger blades. Comes in a variety of colors. Lifetime warranty too.
Ответитьhi i have a question, does a shimano m8000 lever blade fit my m8100 lever? thanks.
ОтветитьHi. Thank you for the informative video. Do you know by any chance what adapters should I buy in order to connect my old SLX M7000 i-Spec 2 shifters? Thank you
ОтветитьThe adapter for the derailleur is included in the package or needs to be purchased
ОтветитьGreat video. I just bought a set and installed them. Thank you.😊
ОтветитьM8100 definitely nicer looking than M8000. The metal finish looks very high end.
ОтветитьBought these brakes and LOVE them. Very good quality product. XC setup here.
ОтветитьDo you use xtr a lot in the US?
ОтветитьYou know if they're using the same piston or the 8100 is bigger? I would be interested on the internal comparison between the 2.
ОтветитьHow do you like the Wolftooth adapter for your Eagle shifter? Do you like the end positioning and is there a lot of adjustment?
ОтветитьWith I-SPEC EV mounting, does that mean I will need the WolfTooth adapter to connect SRAM Eagle AXS controller?
ОтветитьHi, is the shimano m8000 shifter 1x11 compatible to shimano m1100 brake lever? plan to upgrade. many thanks.
ОтветитьHi, I bought xt m8100 brakes nad I want to combine them with xt m8000 shifters and I have problem because brake levers and shifter holders don't match.
ОтветитьI just upgraded my 9 year old Avid Elixir brakes to Deore xt 8120,wow what a difference.
Thanks for your video BTW 📹
can i mix old shifter with m8000 or m8100 lever. i have a old xt 9 speed shifter
ОтветитьGreat detail on this review thanks very much
ОтветитьWhere did you get the adapter for ispec 2 shifters?
ОтветитьExcellent, thank you. Very good points and info about the new i-spec EV vs the older i-spec II and the shifter mounting brackets.
Ответитьhello sir. is the m8100 lever compatible with the m8000 brakes? ive been having the leak issue on my m8000 brake levers. thanks
Ответить.
ОтветитьDo I really need 4 pots for enduro bike with 203mm rotor?
ОтветитьGreat video and review! Next time twist the oil bottle 180degrees, that will make it so much easier not to spill
ОтветитьThank you, excellent as always. The very best!
ОтветитьHi, wondering what's on the inside of the free stroke screw on Shimano XT BL-M8100 brake lever.
How far can you unscrew it before it pops out (as I`ve been told it will). Am installing one, FS screw
is out about 1/8" out and still not much free stroke.
Roy
How did you put the xo1 shifter in the brake lever? I have a gx shifter that I’m trying to put on my xts with i-spec ev and it doesn’t work
ОтветитьCan you use the m8020 4 piston caliper on the m8100 lever and hoses
ОтветитьShimano deore xt pasang di sepeda etoxic 2635 boleh gk
ОтветитьGood review!
ОтветитьNice but I like 4 pot 😉
ОтветитьSince I have the older model and mounted my shifter and dropper remote via the I spec II, I wouldn't bother for this apart from the rear calliper which you mentioned about the cable issue. Looking for a new rear calliper now... Thanks for this, very helpful indeed,.
ОтветитьThe problem I am having is it doesn’t give me the option to let me purchase the front brake and back brake or does it not work like that
ОтветитьHello, I've just noticed you are using the new 10-52 casette. Would the Shimano XT m8100 sgs RD be able to work with the new casette? It current works for me with an 11-50T NX eagle casette.
ОтветитьDo you need to put some flued in
ОтветитьWhere can I get the adapter brackets from? Going from slx7000 to XT81000 and my adapters for my command post dropper and sram shifters don’t fit
ОтветитьYou have the best MTB channel by far...i am glad i stumbled upon it. Thank you for sharing your expertise. You gained a new subscriber...
ОтветитьEste freno m8100 es compatible con un shifter slx m7000, de los que se pegan al freno?
ОтветитьDo they use the same size piston?
Ответитьvery helpful i just brought some m 8000 s on sale
ОтветитьMY marlin 7 came with 'Shimano MT200 hydraulic disc', the levers are horrible, can i replace the lever to a deore or better with out replacing the entire brake? I.e. is a Shimano MT200 lever interchangeable with say a XRT BL-M9020?
ОтветитьWhere did you buy the adapters? I just buy the 8120 and search adapters for my gx and roxshox reverb 1x remote...
ОтветитьI looked at the position of the brake yoke and was horrified, since I have a manette mount not i-spec, I just won't get my fingers to the manette lever, thank you Shimano
Ответить