Hydraulic Car Jack + Bearing Puller = Homemade Hydraulic Puller (The best DIY Creative Smart Idea)

You guys that do this kind of work, I swear you are geniuses! Give you a piece of metal and a couple tools and you can build anything. Love your video, extremely cool to watch. :)

Muy bueno que pegamento usas aca no se ve de eso😊😊

Yeah but you cant use the jack sideways or upside down.

Very clever.

Music sucks very annoying ruined the video for me!

So how are you attach a clamb shell puller so you're not pulling against the outer race just in case you want to save the bearing

The music sucks

It looks a bit clumsy but YEAH.

I love the idea, but it's an awful lot of stuff to have to fumble with on top of the weight of the hydraulic cylinder it is kinda ungainly, also the center of the puller usually has a centering cone shape to center in the end of the shaft that the pulley or bearing is pressed onto to help keep it centered while working the puller, but I definitely like the concept 👍

How to ruin two perfectly useable tools by making them into one mediocre tool.

Nothing is gained fitting a jack to a three legged puller, when the original three legged puller is used it fits into a more confined space (without the jack attached) and a spanner is all that is needed to operate it.

es peligroso ya que la cabeza del criquet es de fundición y al no tener como saber cuánta presión ejerce el hidráulico lo más probable es que se rompan las soldaduras lo ideal es hacer esa pieza completa en acero y así si funcionaria sin riesgos, pero la idea es muy buena

and you still can use it as a jack!

А заводским съемником просто снять подшипник нельзя было, для этого нужно было испортить домкрат? А. понял, лень крутить винт. Легче качать.....Особо поражают комменты, это "великая идея"?....ссссууука!

Спасибо за видео,не плохо придумали, удачи и здоровья вам.

Cool ❤😢😮😅

Стоит ли оно того??!!!

I think I would just go buy a puller.

This is genius and I'll definitely be making one. Already have the large puller and bottle jack!

Que tipo de cola que tem nesse vidrinho...? ...e o spray o que é?

Das Pumpen in der Luft ist ziemlich wackelig, spätestens wenn man schwere Lager abziehen muss. Vielleicht mit 2 Wagenhebern einen bauen?
Pumpstation am Boden mit breiter Auflageplatte und mit Schläuchen zum Kolben-Armabzieher verbinden.
Ich freue mich schon aufs Video😊😅

Oh here is a good one brake hub puller or rotor puller some Hondas get pretty locked up.

Now make it also an arbor press. Smarty pants.

There's no way that Jack puller weights 2 tons!

Cool video. Put the guard back on your chop saw before it sends a chunk into your face.

Да уж нагородил так нагородил. При первой серьезной съемке он развалится. А такие подшипники и так снимаются . 🤣🤣🤣

23 minute video to watch you modify something that ruined the seal on the bearing. Uh ok.

🙏🏻👍👍👌

good original more strong az arm holder

But pull a small bearing at the end...

What was the point if you left the threads on? Now if you use too much force, you'll just mar the threads the same as if you were using the tool normally. Now you have something that takes up a lot of space, but does the exact same thing the puller did in the first place.

Nice skills but I'm not sure what the purpose is. Why would you need the Jack to be inverted in the first place? Also, if it's to have the wider plate at the top for some reason, would it not be easier to just weld a wide plate on top?
Apologies if these are daft questions. Just want to understand in case I need one :-)

Sir what is the purpose of the hose?

Thats a pretty smart idea

Once you have a bearing come apart, and those ball bearings fly out at you like a .22 bullet. Next time you will have a shield between you and the bearing.

welp, its cool lad, but my impact and a bearing puller will do the same trick. but still pretty cool man. if you marketed it I know I'd prolli pick one up.

Complete waste of time

Wat awaste oftime

I don’t like the back ground music too loud. What he did is great 👍

კარგია მაგარი სიოვნიკი გამოვიდ,.

🏅🇧🇷

Хорошая идея. Лайк!

For the love of god put a blade guard on that abrasive saw! If that blade shatters you’ll be sorry.

ну и потом уши под лапки домкрата обломало сто пудов... 😁

Это работает только в вертикальном положении по сути фуфло

Фігня.

Странно у такого великого мастера нет полуавтомата

Видео как сломать съёмки и домкраты. Собрав неведому херню

рукопоп...