Комментарии:
I'm so freaking tired of watching video after video where they claim that when you point out it up and loosen that screw in the corner, you can "adjust" it.
They NEVER freaking show how it's being adjusted or what they are doing. You just see hands doing stuff and it makes no sense.
I loosen that screw and NOTHING happens. Nothing moves, there's nothing to adjust, it's just all locked in place with a loose screw in the corner.
Damn I'm off to watch another hundred videos until somebody finally explains this.
I need to find a base plate for my wee bill s, can someone send me a link to where I can purchase. Thank you
Ответитьnah this video is goated thanks bro
ОтветитьHi There I am carrying zhiyun weebill gimbal creator pack but in menu button camera option is not available it's seeing only motor then wheel then joystick then calibrat then angel and last is about, can you please help me ? why camera option is not available, moreover if I am doing any mistake the please guide and correct me. Thanks
ОтветитьHi
Does anyone's gimbal have Axis Lock problem. It's perfectly balanced, work for some minute and beeep sound Axis Lock on the display. It's brand new, so dissapointed😢
Super easy to balance it with this guide 👍
ОтветитьOne of the greatest technical advice for balance and almost nobody speaks about it is to use an oil balance/ level to do the adjustments on the gimbal you have to do it on a balanced surface to get the least amount of pressure on the motors and get the smoothest experience on the gimbal
ОтветитьSorry a bit late here, but would the Manfrotto 323 work in place of your suggested quick release? Sorry quite new to all this and your recommended little guy seems out of production. I'm in EU, maybe just not available here.
Ответитьthx man! <3
ОтветитьBG sound forced me to close video
Ответитьhey Peter what are the red dots on the camera
ОтветитьThat's a great video! Thanks a ton Peter. Very helpful !
ОтветитьI hope you're still taking questions. I have to use the riser when I shoot with my a6400. The problem is that it will not remain tightened no matter how tight it is initially. Any ideas about how to fix this? Thanks
ОтветитьVery helpful video. Thanks man! 👏
One question: Should I recalibrate the gimbal every time after turning it off and on?
Because on shooting days like weddings I can’t leave the gimbal on all the time.
Very nice
Ответитьthanks for sharing and now i will buy quick plate release for the tips
ОтветитьThanks
ОтветитьI literally got my Weebill S yesterday and this video was very helpful, good job Peter I'll be looking at your other videos to learn more with this gimbal. Has anyone got a link for a similar quick release in the UK? I hate the built in option.
ОтветитьIs it just me???.... or are yhe screws hard as hack to get in???..... mo one is saying go to the far in and screw it in.... wow
ОтветитьHey Peter! How are you? I have a question. Does your weebill s vibrate the moment a rock band starts playing? But when it is silent it moves very well. I have that problem but I haven't been able to solve it. I hope you have some advice I can follow. Thank you
ОтветитьHey man.. does this gimbal connects and works with Sony zve10 ? Please reply :)
ОтветитьHey Peter, so another Koege citizen owns a Weebill S. Bought it as a xmas present for meself :-) Cant wait to use it.
ОтветитьI’m stuck at screwing In the base plate screw to attach my rig. What am I missing? I can’t get the screen in at all!!
ОтветитьSen tam bir HARİKASIN!
ОтветитьWill that quick release plate work with the Peak Design system? thanks!!!
ОтветитьDoes that quick release thing come with the gimbal?
ОтветитьThank you 😭 Been going crazy trying to balance the pan axis and your tutorial was the only one that made it make sense to me.
ОтветитьThanks for the great video. I have a question 🤔. With which camera does this (Weebill S) work without any problems?
ОтветитьMy screws don’t even fit and I don’t know what to do
ОтветитьThanks for this tutorial! Do you have any suggestions for a replacement for the baseplate? The piece I'm referring to is the longer one beneath the camera that you mount the quick release plate to.
ОтветитьJUST GOT THIS GIMBAL TODAY....AWESOME VIDEO, THANKS FOR THE TIPS BROTHA!!!!!!!!!!!!!
ОтветитьOnce balanced in the upright position, I found the gimbal was not quite balanced in the underslung position. I rebalanced it in that position and it did not seem to upset the upright balance.
ОтветитьAfter I calibrated and all that jazz, it still seems like there is a lean to the side. How do we fix that?
ОтветитьJust a question here. Isit normal that the gimbal vibrating if there is no camera on it?
Ответитьwhat is the reason off camera base plate? i can use my a6400 without it. i only use extension plate. am i doing it wrong?
Ответитьhello, i bought this for my nikon d5300 and non of the supplied cord fit my camera. Can you tell me which cord i need to hook this gimbal to my nikon d5300? thanks
Ответитьfor all the people only switching between the weebill and handheld: The Weebils base plate already comes with a quick release mechanism. Somehow it´s barely covered in all those reviews, but the little screw and silver pin at the front end of your base plate is actually letting you take your cam off and on in seconds without rebalancing!
ОтветитьHi sir does the Weebill S come with lens support
ОтветитьHi dear, i’ve a question for you, i’ve weebel s and i want to acquire the plate for quick release showed in your video you can send me a link in amazin? Thanks a lot
ОтветитьHi Peter, I've just received my weebill S and I'm having a lot of trouble getting it to work. I'm using a Fuji XT3 and have tried both the 10-24 & 18-55 zooms. The issue is that once I've balanced the camera - no movement on any axis, the camera stays nice & still - the pan follow mode drifts to one side and then the camera tilts downwards on its own. Also in lock mode the camera won't seem to lock and moves all over the place. I've calibrated it a few times, auto tuned, rebalanced it so many times now but I'm still having issues. I also updated the FW to 2.02. If you could give me some tips or advice on what I might be doing wrong I'd really appreciate it. Your videos are very informative and I've been sat here watching them over & over trying to figure out what I've done wrong!!
Thanks!
Ended up picking up this gimbal today after watching some of your reviews, but did that dude really mess up his leg?
Ответитьmay I know what tripod do you use cuz the base plate from quick release plate is too small for my tripod..
ОтветитьWhat's the annoying background sound while you speaking. Sorry I had to watch the setup somewhere else.
ОтветитьIs no one gonna talk about that cinematic in the beginning of the dude busting his knee?!?! 😂
ОтветитьGreat video, where can I find the link for custom quick release plate in the UK? or what is the name of the custom quick release plate please?
ОтветитьUR VIDEO IS AMAZING GREAT EDITING!!!!
ОтветитьJust thinking about Ifootage seastar quick release...would it be very bulky for gimbals?
ОтветитьHey, do you know how to use the record button via the joystick on the gimbal, but without charging the Sony A73? I only want to use the batteries power for the gimbal. Best
ОтветитьThis is one of the best setup videos for the Wheebill S.
Your tip about the quick release plate is invaluable.
The inbuilt quick release is so frustrating. Your solution is much better.
Thank you.