Комментарии:
This is guy is wild 🤣🤣🤣
ОтветитьИ зачем это? А главное-нахуя?
ОтветитьPointless and stupid
Ответитьна таком толстом металле ,можно не извращаться, и так электродом заварится. для кого это видео?
ОтветитьКогда коту делать нехрен ....!
Ответить👍👍👍👍
ОтветитьWat a waste of money using 2 rods wen u can use one bigger rod
ОтветитьWhat a waste of time.
ОтветитьУ электродов хорошая обмазка!
ОтветитьThis is someone who as time to waste welding takes time so I've learned not to waste it. . Hey if you're left handed put another rod in your right hand!! For this method is a waste of time.. I have being expose welding since the six grade and now am a welder
Ответить...Or just go with the next size diameter rod. Ludicrously stupid trick.
ОтветитьIt's a trick and a waste of time. All I see is porosity. Use 5/32 ,3/16 or 1/4
ОтветитьDesde luego no para uno de ver a jilipichis por todos los lados ,machaca los electrodos para luego soldarlos entre ellos , cuando no los pegan con Loctite, 🤦🤦🤦🤦 bien dicen no son todos los que están ni están todos los que son , y luego se dan de listos ,pon un electrodo más gordo y deja de hacer el jilipoyas que en lo que haces eso y no ya lo tiene uno soldado la chapuza que vayas a hacer
ОтветитьNice watching from Bangladesh 🇧🇩😮
ОтветитьТакое уже давно придумано не издес а другом стране
ОтветитьWhat a waste of time just hold the rod . Or let cool then close the gap
ОтветитьEach to their own I guess. Not something I would waste the time on personally.
ОтветитьThis is a terrible practice. You would fail anywhere in the world doing this, work or test related. Wouldn't recommend anyone doing this if they want a decent weld.
ОтветитьThe last one wasn’t a great job….
Ответить😮mig its batter the rod welding. its are more waster time energy.
ОтветитьNot good! Contaminated garbage
ОтветитьI’ve welded all over the world and even parts of Arkansas and i have never seen no shit as dumb as this… but with 33 million views I’d say he got the job done 🤣🤣🤣
ОтветитьThat rod holder looks terrible
ОтветитьHaha may blowhole 😅
ОтветитьIt's called slugging.. for people who do not know what the hell they are doing... bridge gap welding is something to avoid. A professional can accomplish it with a single electrode.. if you have to.. monkey spanking going on here.. retired high pressure vessel welder..
ОтветитьКакая-то хрень
ОтветитьIncompetent at best, dangerous at least. There is a reason you have to pass a welding course and thats to show you not to do things like this .
ОтветитьWhat the fk
ОтветитьSimply learn how to weld and stop wasting consumables.😅😅😅😅😅😅😊😅😅😅😅
ОтветитьХватило одной минуты просмотра...пошла кровь из глаз...это бред ради лайков...ну держи ДИЗ
ОтветитьСамое чмошное видео .!!!
Ответить0000
ОтветитьThanks
ОтветитьKereeeennn
ОтветитьПосмотрело 32 миллиона сварщиков всего мира😂😮😊
ОтветитьВообще то ЭТО СВАРКА.
ОтветитьWhy wouldnt you just use the normal rod and do multiple passes or get a thicker cored rod if you wanted to deposit more material?
ОтветитьDude clearly isn't a welder
ОтветитьSekret zjebania
ОтветитьMy welder used one welding rod with his bare hand while filling a a space
ОтветитьКак по мне полный бред, заварить маленькие отверстия можно и обычным электродом, а использовать присадочную проволоку можно и не приваривая ее к электроду.
Ответить👍👍👍
ОтветитьWhat in the hell is that .. just stop it
ОтветитьFelicite argentina😊❤
ОтветитьUauuuuuu😮
ОтветитьWaste of time.
ОтветитьNot only is this method a huge waste of time, it will leave you with some dirty ass welds that won’t hold up to standards. I suppose if you have no standards and like to weld molten turd puddles then this trick is neato. Not only did you use sandpaper to contaminate your makeshift filler rod… by the way, who uses scissors to cut sand paper? Use the edge of the table and just tear it!! And then set it aside to use for something else because you don’t need to use it for this “trick”. If you insist on taking extra steps to attach a filler rod to your electrode and need to clean it up prior to tacking it, may I suggest the wire wheel? It’s a much better option for cleaning the surface without leaving sand behind. Speaking of cleaning the surface… is there a reason the piece being welded didn’t get cleaned up prior to shoving that molten turd weld down the center to fill the hole? If you have two hands, I encourage you to just incorporate the two handed filler rod trick and leave this weird welding hack to the hacks who can’t weld!! I could have tig welded that hole and then stick welded it followed by a pass with the MiG welder and even braised it… then I could have cleaned it up, set down my torch, washed my hands and made a sandwich all in the amount of time it took to perform this “shortcut”. If you are new to welding, I can assure you, this is not a trick experienced welders who take pride in their work use!!
ОтветитьPeople if you're new to welding don't watch these stupid videos these guys don't have a clue what they're doing and don't have to pass inspections or follow any regulations what so ever that's why they never learn how to actually weld.
ОтветитьI wasted my damn time today 😂
ОтветитьQue bacana, você manja mesmo cara. Grátis, abraços, sucessos
Ответить