Creality K1 Max In-Depth Review: A larger K1 with micro LiDar, AC Heated Bed, Ai Camera, air filter

😮 she's so big now I remember when I seen her when she first start she was a babe with a missing front tooth.

Please print the robo alpaca on the K1 using the same speed as the Prusa MK4 and compare them Thanks

Why nobody does clearance tests with ABS?

I love your videos but they would be much nicer if you didn’t allow the stupid commercials to interrupt them.

great video. its on sale at microcenter for 200 bucks off! going to gets one.

One of the best review videos I watched. Honest, straightforward, clean. Thanks!

Excellent review with all the info I needed.

Excellent review, to the point without fluff.

The K1 Max has given me nothing but problems. They pushed this product out to compete with bambu labs and failed in my opinion. Im hoping to return it if I can. But my warranty is up

One of the outstanding features of this review is her willingness to print some models over again with slight adjustments and most models printed with the same materials from different manufacturers. She also covered a wide spectrum of available filament compositions. 😊The total amount of time that was spent preparing this review was absolutely amazing. This produced a very unemotional and complete review.

OK so 5 months later and multiple firmware updates, has anyone been able verify if the lidar does anything?

I wish you would mention/show the print speed. especially when comparing the print time vs regular printers. I assumed you were printing at 600m/s but the creatity slicer speed bar did not looked maxed out so now im left with unknown variables.

thanks for great review, do u still recommended this

Thank you for the video. I just got the K1 Max and I’m finding the first layer extrusion is uneven and spotty with every print. What would you suggest I adjust to resolve this issue? Thank you.

I think if you are comparing prints, maybe you should change the speeds to be the same, then you can compare apples to apples.

Should i get a raise 3D or a Bambu or this? Opinions please 😊🙏🏼

AMAZING REVIEW.

How did I miss this one..
This or X max3? Anyone have experience?

Also, put the heat bed temperature to 60c. I was told this by a manager at Jaycar, they sell Creality printers. He is printing models in the shop that you wouldn’t believe unless you saw them. He bought 2 K1’s and a K1 Max for himself, they run 24/7. I live in Perth Western Australia. Cheers

Is this model more like K1C than just K1?
Because I heard many bad things about K1 but K1C is usually praised for its features and print speed and quality, getting closer to BambuLab printers.

this review was 8 months ago. have creality upgraded the firmware since so the lidar sensor works? im in the middle of deciding which machine to get. x1 carbon or K1 max

how is the K1 Max bed looks like in ocraslicer is it tilted ? if you can make a video of fixing that

Tronxy bringing the pride filament yo

I really think that this is one of the most best review video i have ever seen in my life.

That's so cool

when i was test petg on my ender3 S1 PRO .the MAX volumtric speed is 15.NOT 4 .so the max is limit 9 is not the right, I think it need to test it.

I love this channel!

What a detailed unbiased review, 👍

Excellent review very professional, dispassionate and informative. Thank you.

Can you make one video showing which printer in stock config gives the advertised flow rates and what is the actual flow rates of those which don't , using same filament for all tests at same temperature. It would probably make a cool video, Thanks

You can totally print large functional vase mode objects with a 0.4mm nozzle, you just have to set your outer layer width to anywhere from 0.8mm up to 1mm.

I know this sounds like a recipe for an instant clog, but it works like a charm (even on a stock ender 3 pro) and the strength is the same (if not better) than the same print done with a 0.8mm nozzle. the only minor issue i have encountered is sometimes the bottom layers have a problem staying attached to the wall, but that can be solved by adding a raft with 0mm extra margin. that raft becomes your new, stronger vase/container bottom.
Vase mode containers printed in PLA+ using this method are nearly indestructible.

I just want to say thank you for showing the product, giving the price, name in the video cover photo. And then following up with direct cut and dry information. Its nice to break up the personalities and jokes with hard information and cut and dry reviews 👍

Just facts, no nonsense, awesome review, love it. Thank you ! 🥰

Thanks for great review 👍 After a year, are all functions supported now?

i watched this video after my ebay k1 max broke and this makes me want to go buy one stright form crility love your videos

For this k1 max what is the bigest abs print that can do without edges lifting 😅

Best review on this machine, thanks!

Just getting back into printing after a few years off, and wow! I would like to formally thank the Voron bros for having faith in their method! I remember watching home made voron machines doing the speed boat tests! And wow! It’s in a consumer product now!

I wonder fast she was printing that regular PLA and recycled PLA

best indepth video i have seen, great!

I would enjoy tests with this involving miniatures with higher detail. Maybe something using a 0.2 nozzle size and much slower speed to test what the maximum quality might be obtained as opposed to a mainly speed focused assessment.

whats ur nozzle on K1? volumetric flow and speed? THANKS

so much ringing and VFA ..this printer is bad dream

Oustanding Review over there! 😮 The Best i've ever seen. Thank you!