FAKE DeVILBISS SAMER SRi Pro: Spray Gun Review

How would this gun compare to the harbor freight black widow? Been wondering that if a knock off would be better than a harbor freight one lol

Pintei uma PIAGGIO VESPA a 25 anos atras de PRATA com uma velha devibilis com o bico errado e tudo e consegui um acabamento de espelho na pintura final e sem manchas 😂😂😂😂😂 imagina hoje com as FAKE GUNS 😂😂😂😂😂😂😂😂😂😂😂😂😂

You can go back and forth all day about expensive paint guns and cheap ones but it all comes down to prep work and the user, if your a damn good painter you can make any spray gun work and look professionally.

I heard that the Chinese copy was made after the patent expired on that model of gun. If that is true then the Chinese make a copy as close as they can for a discounted price.
It looks like the patents were in 1989-1990 so the patents probably have expired after 30 years. Patents usually are 20 years with a possible 5 year extension.

I have two fake Devilbiss. One of them is the same as this, except it doesn't have that silly name written on it. The other is "Gti pro lite" 1.3. The small SRi is fine gun, it atomizes ridiculously good , I use it for clear. And the fake gti pro lite is the complete opposite, - total garbage. It doesnt atomize shit, and spits big random sized droplets. I will replace it with genuine FLG5.

How is the gun holding?

🤣🤣🤣

i watch another channel & they do plastic dip which is the peelable paint i think? but wow they play with different colour effects, pearls, colour shifts.

have you ever listened to music thats been copied before or every watched movies that are counterfiet ?

To be honest, when you buy a Chinese gun, make sure they don't have plastic or rubber seals behind the air cap, there are a lot of good guns that are cheap and spray better than the devilbliss spray guns, there's Avalon, atom, just to mention, I mean I bet half the parts of a devilbliss spray gun are made in china, coz everything nearly comes from china, a good painter, can make any gun work, I painted for over 28 years and seen a lot of guns, ime sorry if this offends anyone, but there are a lot of guns that are overrated, and some prices are ridiculous, for a good gun that's not right up there like data, ide go a ANI, Avalon, atom, sagola,nordsmen, walcom, just take your pick, hope this helps, and please please gunny, can you not mentioned devilbliss, and spray guns direct in almost all your episodes, regards John

At how many bars (psi) it works perfectly?

peelable paint? are you talking about plasti dip?

I don't know man, that fan looks hideous lmfao

I appreciate your honesty, some videos that are called reviews are just trying to prove to you that their fanboy "make" is the best, and the only one you should buy. I can understand your trepidation at "fakes", but you still are willing to give credit when it is deserved.

Il risultato è migliore di quelle di 600€..

🤣🤣🤣🤣🤣🤣🤣

At the end of the day it comes down to the user, regardless of the type of spraygun. You just proved that you can achieved great results even with a knock-off spraygun!😄👍 Great review at an affordable price. Can only imagine what type of spray guns were used back in the days without modern technology and still made it look damn good. So good the paint still remains on the classic cars. Thanks for another great review.

I picked a Masterpro 44, and yes its not up to par with a genuine Gti Pro Lite but so far I'm pleased with it. Perfect for a weekend warrior.

Hmmmmm

What are you using in your washer??? I want to buy one for my shop to clean my house paining guns and my Kremlin.

Gunman,where can buy gunman shirt?

Hey @gunman in our paint shop we have been using Iwata lph400 1.3 and 1.4 with lvx caps. We are now shooting a higher solids solvent Spies Hecker 293/295 base coat. I have seen by watching your channel you use non HVLP mostly and get great results . Any suggestions on a non HVLP compliant gun? Thanks

About cheap gunz. Firstly we all know it is a lottery, if your friend got one and it sprays good, the second one usually will be different :D Some years ago, I found little not expensive minigun, called Aurita (tip 1,0) in the local Glasurit paint shop. On my question they answered "well, this is not bad minigun, for several jobs it will lasts". I am using it rare, maybe once per month and it still works for 4 years.
Have a nice day!

Still a cool vid....keep the boss happy....a good boss is hard to find

Question will a Hush ChIcago 70 litre Air Compressor
be enough for me to spray car parts also sanding etc daily use.Gummen help me out here as these compressor are very quiet which is better for me or should I get the 100 litre one is 799 70 litre the other 1300 bucks.cheers

I can not find or seen any videos on review for black widow lol. It's exploded on every autobody group.

The biggest problem with so called fakes is when they are marked and sold as the original product. Whoever knowingly buys a fake was never going to pay the price of the original anyway. I worked for a Japanese company who’s products were copied, they actually looked upon it as good marketing for the original as it’s flattering that their products are so good that everyone wants to copy them.

Isn't it wierd how the envirobase is like green/blue when it's wet no matter what color paint you mixed? Red paint and it looks green until it dries... so weird

Agreed, but why should we pay $1000 - $1500 for a gun when the R&D for them is ten years old and the price just keeps going up yet the gun has changed stuff all.
Would you pay $50,000 for a 1980s car with some wifi sound and an air bag.
Price on items should remain the same or reduce over the years if no new R&D goes into them

@The Gunman please could you do a full review of the P1 Coating system ? Primer, base, hyper gloss. Also if you can use your own base/clearcoat with the system etc Cheers thanks

You need the 6 layers to peel it easy, with 2 layers it will not peel good

Looks like it would be a good hobbyists gun? Then again.. I'd recommend getting a easy to use gun like a Prolight even if you only do it for a hobby, a good gun will be worth every penny. There's an Iwata knock off ( in the states at least ) called Pro-tek that actually sprays well, but as with cheap guns they don't last more than a year or 2.

a toute les fois qan on achète des contrefaçons ,on tue notre démocratie et ont renforce un régime totalitaire .mieux payer un peux plus et vivre an Homme libre .

Thank you for the review

Not funny.

A good honest review Gunny, I personally wouldn't buy these fake guns but there are some people that just can't afford the originals so they have their place and from what I've seen they are pretty good guns. John UK.

Pff biggest fan uv seen for a cheap gun. Normally they lack in that department. 😆 must be kool tho mate people notice your gunny. Small time celebrity in the painting world 👊

I bought a similar gun branded devilibs it sprayed good for a month then the seals blew out total piece of crap compared to my ani r150 or my star mini gun. Be ok for someone wanting to spray a set of mags at home or small jobs but better off with a good brand in my opinion

Hey Gunny what causes the paint to build up on one side of the air cap?

I remember how pissed off you was when someone stole your logo!

Great video as always. Wish I would've seen this before I had purchased an ANI mini/mid. But I'm most definitely looking forward to using the 160. Question. What size tip n nozzle you like to use when you spray your wet on wet?

I've got one of these dedicated for my ak350 fade out thinner gun. Works well over the wet on wets and small direct gloss fades. Way better and more controllable than the aerosols

i was random browsing spray guns on ebay etc the other week, and came across one that made me giggle..
It was called Segolio.... :P
I wonder what brand they attempting to copy?!?! lol

Thanks for making the video Gunny even though you had moral hesitations. I got an Ntool fake GTI and its great for $65. Would love to see a under $75 clone gun shootout from a pro painter. The people disrespecting them have never used one.

To quote my wife's father, if it's high quality I don't care how cheap it is!

👍 Boss man!

I always find it hard to swallow paying so much for a quality gun when a cheap gun that costs 1/10th as much will do a good enough job that you really can't tell which gun was used. I mean, don't get me wrong here. I will (and have) paid it. But what happens when some manufacturer produces a gun of equal quality and charges 1/4 the price of a high-end gun? Has that possibly already happened? And yes, I'm also taking into account things like warranty and replacement parts. If anything, parts for high-end guns are also needlessly expensive. When you look at it, these guns aren't really all that intricate. Some good materials and attention to detail during the machining and finishing process is all that sets it apart. Yes, that's worth some extra cost, but not to the extent they're charging.

prolite copies 1.3 110 cap work really nice, three holes in the air cap. I was painting trucks a while back and wasn't going to bring in my Sata to spray used junk trucks, most of the time they were white. Paint jobs with the prolite are as good as yours(other people's opinion) too bad I can't post a pic

One thing about fakes is they just don't holdup or perform long imho, but compared to China freight 37 quid ok

Didn't have good results with the GTI pro Samer gun. Trying to save $$$ cost me $$$. I use throwaways for primer/sealer/polyester. Iwatta for all else now.
Sticking with the same guns, you get to know them very well. I'm done experimenting, finally content with my paint guns and the results i get at home. (Where i am always working on something)

The parts backup for a copy gun will be non existent.
You will be throwing that gun away in time, as only a small part that goes missing or needs changing will not be available and now you are stuck with a shining write off.

Chinese knock offs are just that, stolen knock offs. No parts, no support, go and buy another one. That is what they want you to do. Just go and buy another one.

In the long run, it will bite you on the backside. Years to come, you will need something like a small part, and you will not be able to get it. Your body shop will not have it. Chinese company by then moved on and stealing and copying something else.

Do not entertain the idea of a chinese copy. Down the road, it will bite you on the backside.