Комментарии:
Sorry again for the delay on train worlds and creations, I hope you enjoy the Monorail! Be sure to tune in tomorrow for another Moonbo LIVE Scrap Mechanic stream! See ya there!
ОтветитьThe fact that I I am a kid I am seven I am using the speaker button on the device
ОтветитьHi for give you😀 it’s 0K
Ответитьmska
ОтветитьSo I know this is a 3 year old video but i think all you would have to do is continue and eventually it will become a 90 degree turn. You don’t want the train to jackknife itself. Trains will be built differently and not all might be able to bend so much.
ОтветитьPeople haven’t commented on this for a LONG time.
Ответить69 ep 😉
ОтветитьNO SUSPENSION!?? Why?
ОтветитьIt’s not a monorail it’s a maglev
ОтветитьAmazing
Amazing
Amazing
Amazing
Amazing
Amazing
Amazing
Amazing
Amazing
Amazing
Amazing
this is the video that earned my subscription. i have not been disappointed.
ОтветитьCan you give me all mod download links used here?
ОтветитьBuild a laying vehicle
ОтветитьBuild a real flying plane
ОтветитьCool😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱colllllllllllllllllllll
ОтветитьUse the staircase wedge block
ОтветитьA full 90 is: (((MORE BELOW)))
Right/Left Turn. 120X120 Right Turn
May need to make some adjustments.. But this should get you started.
(Start here:Right turn)
1X20,
2x20,
2x10, 2X10
2x8, 2x8,
2x5, 2x5, 2X5,
2x3, 2x3, 2x3, 2x3, 2x3,
2x2, 2x2, 2x2, 2x2,
wedge, wedge,wedge,wedge,wedge,wedge,wedge,
2x2, 2x2, 2x2, 2x2,
2x3, 2x3, 2x3, 2x3, 2x3,
2x5, 2x5, 2X5,
2x8, 2x8,
2x10, 2X10
2x20,
1X20,
(Start here: Left Turn)
Most will rotate.. (up - Left - Down -Right)
On the Wedge I put them one way and flip on the back side so they lock together to make a rail.
the modpack doesnt come with all the right pieces for it, so you need to download the mod outside the workshop on his video descriptions and watch his tgv video, i think he shows you how to make a turn on there! -lofault
Ответитьhi im kayden ok
ОтветитьMy idea for aligning the rails was this:
build a long pole on a bearing with the length of your curve radius, then paint two blocks at the end in the right distance for your track width. Now you can rotate this pole along your desired curve and use the painted blocks as reference, so you can place the angled parts acordingly. Hope this helps.
24Karrott subscribers!
ОтветитьIt's my build moonbo
Ответитьfor a 90 degree turn you should straighten the wheels and help the wheels by putting the whells on a barren and push the wheels towards the track
Ответитьsmaller
Ответитьyou use the samller tracks
ОтветитьI wanna see this as a subway train ai, so that it stops at a station, goes to the next, stops, and goes the other way at the end! That would be awesome!
ОтветитьLol 69
Ответить@Moonbo Have you tried experimenting with 1x1 wedges to try and change the plane that you can attach the rails to? I might experiment later.
ОтветитьAre a button to make it so u can walk in the train when it's moving.
Ответить#69 like this comment if you know what i mean
ОтветитьADD WORLD DOWNLOAD TO THE PRIVATE ISLAND
ОтветитьI would also look at Beseige This's old scrap mechanic train videos, they're great for train ideas
Ответитьlove it man!
ОтветитьThx for takeing my suggestion for the monorail Moonbo!!! 😃
ОтветитьTo build a 90 degree turn you have to use the vanilla smc wedge piece. I recommend going in this order: 2x20, 2x10, 2x8, 2x5, 2x5, 2x3,2x3,2x2,2x2,wedge. Then repeat in the other direction
ОтветитьMoonbo does this monorail require any mods?
Ответитьmoonbo nice highspeed monorail
ОтветитьIt should be called the Moono Rail like if you agree
ОтветитьMoonbo I think if you're using the turning blocks you can use all of the different sizes. So when you get to getting out f the turn use the bigger peices because the bigger peices have a slightly longer angle.
ОтветитьIn Grego's TGV video he showed how to do the curves
Ответитьfor rails you have to use the 1 by 1 triangle
Ответитьyou could use the wedge piece then slowly go back up in the sizes of turning track
ОтветитьYou need to use one staircase wedge and then go on with the train parts again
Ответитьwhy dont you make doors for the front/rear of the train?
ОтветитьOn the example you made, you need to have smaller ones on the left and bigger on the right then keep on going, then on the right use some smaller ones. you'll get quite a wide turn, but it turns non the less
Ответитьyou are soo awesome and dont blame your self for your small mistakes!
(sorry for my bad english)..