How to Install/Setup Inline Fan Kit - Grow Tent Ventilation - Hang or Floor? - Vivosun, AC Infinity

THANK YOU!!
as a future grower, with zero experience, I've been looking for videos like this which explains things in a stripped down to the absolute basics way

Enjoyed the video and thank you for the having the answer to my question

How long can you use a air filter in your grow tent,But it's been in the storage unit for about 3 years could I still use it? Thanks Bro

Why would you draw hot air over the plants ?!

Could you not just run the 1st setup but run the outlet duct somewhere near the intake. With a bit of experimenting with distance from the intake, you could hit the temp sweetspot.

When you say this setup is for temeptures cooler than 78 degrees does that mean with everything off and as is? Or is this the temepture with lights on tent closed. My temperature inside my tent before anything is on is about 72. I also have limited space. I want my filter outside my tent if possible.

I think I did less work framing and building two rooms. I like to hang out with my plants.

There are velcro vents with screens to open on the bottom of the tent, open those instead. This is a great video to show the best set ups!!!

Does this need to ventilated through a window to the outside then? Thank you for the video!

Excellent Video ! New Sub

I'm wondering if there are any mushroom growers out there that watched this video. What I aim to do is have the carbon filter and fan outside, stacked on the ground and the duct going up then into the high port on the side, with the airflow flowing into the tent. I believe filtering the air before it goes into the tent is better for mushroom growers to reduce contamination. This puts the tent in a positive pressure (I believe this also is better to reduce contamination). The air will flow out of a vent i will place in one of the bottom tent ports which is a louvered vent that opens only when air is forced through it. I want the air flowing out the bottom to get rid of CO2 (created by the mushrooms) for a good FAE (CO2 sinks in air). Inside the tent will be very high humidity at times, and i know this fan is supposed to be ok with that, but everything breaks down in time and keeping the fan outside could extend its life, and one less thing to clean inside the tent. Is anyone else doing it like I described?

And put the intractror inside the tent and the carbon filter outside it's possible

Does carbon filter can deal with the smell %100 or a little bit of smell left over ?

But won’t the air hole open it up to light and if you’re doing certain times where the light is off, wouldn’t that be a problem?

Why do you put the cloth filter on the carbon filter on the inside if you have it outside of the grow tent?

Thank you! For some reason I could not figure out the straps and I’m not a dumb dumb and it was becoming very frustrating. I have the Spider Farmer kit which is same as this just rebranded

I don't want to create confusion but the manufacturer of the fans I use (not the same ones used in this video) suggest never direct connection filters to fans and instead to use ducting between. I'm just curious to know if you've ever heard this suggested or if you reached out to the manufacturer directly?

I have two 3x3 tents with 6 inch carbon filters on the outside of the tent sucking in cleanair,and ac infinity 6 inch inline fans on top of each tent on the ouside each with its own backdraft dampener,then Y split into a single 6 inch duct then one more backdraft dampener right before going to the utside window soffet a made for my basement window I made by taking the screen out for the hopper window and got polycarbonate cut to the same size with the soffet mounted in it,and sealed off with silicon and clay weatherstripping around the screen frame in the window

great video

What is the best for my citrus tree? How long to leave them on? On when light are on?

Thank you for this video so informational

HVAC rule: any exit flow from a fan must have at least 3 or 4 flow diameters before a change in flow direction and that change needs to occur gradually and not in a single 90deg turn least you cut your flow rate by half. A radius of 10 diameters is not too much. For a 4” diameter exhaust this would be 4-16” exit distance before a 40” diameter turn radius. These facts can be seen in every manufacturers ads showing a fan with a straight intake to exhaust ducting setup. When will the uninitiated stop trying to lead the uninformed?? If you understand this, please explain why some you would choose to decrease the CFM of the setup by half for each violation?

My duct doesn't fit my fan, why? What am I doing wrong?

where does it all exhaust to?? is there a smell coming out off this?

hey im using active inline system with t6 for exhaust and s6 for inline my settings atthe moment are on auto mode with min 0 max 4 for t6 with temp transition 1% and 0 to 2 for the s6 with 1% transition aswell i got a problem with the VPD is over 2.5 im using 60x60x160 tent the inline fan takes air directly from outside the house and exhaust go outside aswell temperature is around 20-28C the place i live and humidity is like 30-40% at this moment is 27c and humidity 34% and my VPD is 2.53 im only testing without plants only tent setup with lamp and everything on without circulation atm is humidifier inside gonna help me make this VPD to atleast 1.2-1.5 ?

Awesome!! This is the video I’ve been looking for!!!! Thanks for sharing!!!!!!

clip the clip to the clip.... got it lol

Who’d you beat up?

These grow tent filter setups givin me ideas for a home air purifier diy, just need to find a hepa filter i can add into the setup!

👍👍

If the manufacturers had their crap together they would provide a simple mounting plate that you could attach to a top cross pole with u-bolts or pins and use the mount that's on the fan. I can probably fabricate something that will work, but I shouldn't have to.

The methods you're showing drastically decrease air flow. Putting a 90° turn in the airline cuts about 40% of the airflow. They need to be as straight as possible.

Awsome video. I'm curious of your opinion. I want to set mine up in my insulated small shed. If this space is let's say 85-100. How would you control that access heat when your bringing in fresh air? I appreciate it. Thanks

Can I put the vent on my window so it can get fresh air

so how do you place it on the floor if your rooms to hot for the life of me I can’t hang it up top because it keeps falling down

The price is what I want to know I want to know what it cost to buy one a complete kit like you're showing a gorilla shorty 4 by 4

My grow room is at 84 with the in-line fan I'm trying to get down to 80.. I have 3 small fans+ humidifier. Do I need bigger fans ? The light I got is a huge one holds 6 T5 54k watt lights no LED so I'm guessing it's really hot bulbs . What do you reccomend? To get my room cooler

FINALLY!! I just got the Spider Farmer SF1000 and it says that u should have the fan set up by a qualified professional but it looks so simple to set up. I couldn’t find any videos that actually show you a step by step on how to set it up. All the videos are showing u how to hang them but it’s already set up, so thank you🙏🏻

do you mind if I ask..
if I'm gonna be growing in a 3x3, in a 10ft x 10ft room, opposite the window wall..
do I need to run the duct to the window? if so, does it need to be actually OUT of the window? or can it just be near the window?

what if your tent only has one hanging support and needs to be in the middle for the light

great video but with my luck i have to hang inside since my tent gets up to 85 degree

Hi how are y? Do you have any problem with vivosun zipper? Thanks

Para uma barraca de 40x40x160 qual seria a melhor opção?

Bro thank you for clearing this up for me I'm having to use a closet so very limited on space but can't find anything relating blowing air into the filter

fantastic video, really high quality and clearly made

Thank you!! Trying a new setup today and this helped me A LOT

The AC Infinity fan mount is garbage, probably 90% of people use it in a tent and all they have is a plate to mount it to a wall and no pole mount.

Awesome brother 👏 Thanks for showing the different setups and great explaining as well, absolutely appreciated content I've like 👍 & Smashed the SUB button look forward to checking out the rest of your freely shared journey brother ✌🌱🪴💣💥 have a Lifted day

Does this lower the life of your carbon filter?