Комментарии:
does the remote start work?
ОтветитьI don’t have this option on the dash. Is there any other way
ОтветитьHas anyone been able to get the remote start to work?
ОтветитьThey don't work and they don't tell you it is designed to die after 3 used (or tries if it doesn't work -and it doesn't)
ОтветитьGMC Sierra 2012 I have no settings in this screen !! What do I do to make it appear
ОтветитьIt won’t give me that.
ОтветитьBought a fob and programmer for my 2011 Silverado and in about 1 minute I had 2 fob's programmed. Now I don't have to listen to a horn blowing and having to hurry up and turn the ignition on.
ОтветитьI was able to get mine to work but I bought the one with the programmer.
ОтветитьI have a 2013 but doesn’t show up the relearn remote on dash ?? Any other way I can please
ОтветитьThis doesn’t work on 2012+
ОтветитьSCAM
ОтветитьMy 13 impala doesn't have odometer trip button like older cars used to. It has a digital type button
ОтветитьHow is that done on a 2011 hhr LT
ОтветитьThank goodness you discussed and showed where the Odometer stem was located. You saved me from breaking my truck! Thanks again!!!
ОтветитьThe words remote key learning doesn’t show up on my dash…
ОтветитьSitting here holding the stem down and it only gives option to change language never any other option
ОтветитьOh my gosh! This helped me so much! I went three years with a dead key fob. I thought I'd have to pay someone to help me. With this video, I got my new fob to work. It's the little things right?!! Thank you!!
ОтветитьThanks for the vid'
But all your O-Rielly & direct' links, seem to be disfunctional !
My fob lock and unlock is working already, but the button on the top is not, i dont know what is it called..starter? Lol anyways, if i try to reprogram it the way you did, is it possible that everything will work on my fob?
ОтветитьI don’t have that option to relearn. Has anyone else experienced this? If so how did you do it?
ОтветитьDoes not work on my 2008 GMC truck
ОтветитьI don’t have relearn
ОтветитьThat just for Chevy cars??👍💯
ОтветитьThanks again for that had my Yukon for a year and my remote control stopped working but thanks to you got it
ОтветитьOmg so simple if it dosent work the first time just redo it so glad for you thank youuuuuu so happyyyyy lolll lifesaver video
ОтветитьThankyou
Ответитьbought a reprogrammer for my 2009 Chevy cobalt LT and after I programmed a fob to it, my engine light came on. I ran the code reader and got a p0700 code and u0073 code. This makes no sense why it came on right after I did this but it’s been fine. I only have 89k miles. Any help/ideas why please?
ОтветитьI hate these stupid vague videos!!
ОтветитьI was having the issue where I hold the odometer stem and it wouldn’t activate I would hold the stem up the the 3 secs then 15 secs and it wouldn’t activate any ideas on why I’m having this issue or to get it to work?
ОтветитьTengo una. Biuk 2014 pero no aparece esa que usted dice como le puedo hacer
ОтветитьBut how to actually start it? Do you press twice or press and hold
ОтветитьNo matter what I do I can’t get what your dash said on my dash. Any help please.
ОтветитьI cant get the remote key learning active mode to display on my 2008 Impala! Any other suggestions appreciated! I have tried all other procedures!
ОтветитьNo luck with mine!
ОтветитьSame thing here
ОтветитьThis video was so helpful and most importantly EASY. Thank you!!!
ОтветитьThis worked on my '06 Solstice. Thanks.
ОтветитьI don’t see the relearn remote key on my dash
ОтветитьREMOTE PROGRAMMING (For vehicles WITHOUT the Driver Information Center (D.I.C.)) or Relearn Key Info Display
1. Enter the vehicle, close, and unlock all doors using the power lock switch on the driver’s door.
2. Insert a key into the ignition and switch the key as far to the ON position as it will go without starting.
3. Using the trip/odometer reset button, press and release until “RELEARN REMOTE KEY is displayed on the dashboard display.
4. Press and hold the trip/odometer button until “REMOTE KEY LEARNING ACTIVE” is displayed on the dash.
Once “REMOTE KEY LEARNING ACTIVE” is displayed on the dash, you have successfully entered programming mode and are ready to program your new remotes.
5. On the first remote you wish to program, press and hold the “LOCK” and “UNLOCK” buttons at the same time and hold for up to fifteen (15) seconds. You should hear an audible chime from the vehicle to indicate that the remote has been programmed successfully. If no chime is heard, release the buttons and try holding them down again.
6. Repeat STEP 5 for all remotes you wish to program. You can program up to four (4) remotes total.
7. Once you have programmed all your remotes, exit the programming mode by turning the key off and removing it from the ignition.
8. Test all remotes to ensure they are functioning. If any did not program, restart the programming procedure from STEP 1 and switch the order in which you are programming the remotes.
great!!!
ОтветитьPuedo reutilizar el obd key fob programmer para otros controles en el mismo carro…?
ОтветитьDoesn't work after 2010 or 2011.
Ответить2011 Chevy Traverse
Scrolling through all options even, it gives me no “relearn remote” option. Can you please help?!?
I did the steps twice but the remote still isn't working do I need to buy a new one I replaced the battery with new ones also
Ответить