Beginners Guide to 3D Printing in 2022 - Watch Before You Start

can you work and sleep in the same room the 3d printer is at? (printing with PLA)

Arent you sending power back to the machine even when its on? Please explain everything

Can you recommend a good 3d printer for beginners who are looking to exclusively use PET FILAMENT? (that means the nozzle needs to get up to 270°C). No I'm not talking about PETG

Do you make design focustomers😅

No one mentions on any videos if a mac OS works with 3D printers—no mention of software will work on a mac and which software.

About PLA on car parts, I'm using PLA a whole time I'm using 3D printer, some cosmetics on car/in car in black or green, in summer on 40°C so I can say these materials on/in car are around 60°C and no melting, still as new, except the color, color is shading away to more white, so from neon green I have white to green-ish :D

Ventilate with a pool vacuum hose, and an old computer cooling fan. The fan should be on the outlet of the exhaust end.

All that money and effort to make a shit looking boat hahaha. Epic fail

I was skipping around alot, but did you do this all in one take?

Why is that boat in thumbnail so popular.

I'm new to the concept, can anyone say which ones better for starters, Creality Ender 3 Pro vs ELEGOO Neptune 4 Pro?

Craft spray adhesive is good for adhesion, BUT I take particular care to remove the glass plate and apply it cold to reduce the fire risk.

My god you move around à LOT when you speak!!!! 😱😱😱🤯

okay new here but anyone else think he looks kinda like superman? lmao Henry Cavil i think his name is lol

Hi there, just recently bought an ender 3 neo, however on cura, there is no ender 3 neo standard settings, how important is it or can I just use the ender 3 standard settings?

I have an Ender 3. I am having difficulty with leveling. The stepper motor (Y) behind the table is tilted in a counterclockwise direction. This causes the table to hit the stepper motor. I'm looking for a way to adjust the stepper motor.

I recently bought a creality v2 ender neo. What is the best nozzle size too print with?

Lots of good information, but a bit lazy near the end: you could have actually shown the leveling process instead of just describing it 🙂
Actually, I think lots of the information could have been shown practically instead of just explained. Nevertheless thank you for the information.

oh neat, my nozzle was too close to the print bed, the more you know :p

Had to stop the video once he said. If you move the head with the power off it will send electricity back through the system. Ummmmm. Not possible.

Is this even going to be fun? It’s a new hobby for me but every video I watch just makes it seem stressful

very specific question, but do you think a 3D printer, especially the FLSUN V400, can be used to print dirt bike parts, and be strong enough? Thanks

Awesome video... Thank you

Dude, amazing video! I have my first 3D printer on my way and this was super helpful.

Can't wait to 3D print the Shock Cannon from Ratchet and Clank Up Your Arsenal

I am a teenager and started a 3d design class a few months ago. I have been really loving it and wanted to know where to start and what printer buy if i want to print at home

Have you done printing on PC? I am trying to make functional parts for an industrial machine using PETG or PC depending on which is better. I tried PLA and ABS, both the finish and strength was lacking. I believe PETG is good for functional parts...any tips? We are using Prusa i3 Mk3 S+

Awsome😂 thank you

I don't have a filament dryer, but I have an old food saver laying around, so if I won't be using a spool for longer than a day or two I'll vacuum seal it with the desiccant it came with.

I was almost finished with a print then spaghetti any ideas why

I hate PETG.
It is smeary, blobby and ugly everytime when I try to print it. And strings everywhere.
I have no idea about the settings at all and which I have to manipulate for better results.
Obviously Im using a prusa mini with the printing profile for it.
Totally beginner : D
PLA comes out fine, but now my spool is empty and Im left with my second spool which is PETG. X D

Even Ender 3 v2 is better in quality why invest in Prussa Mafia Family...

Bro couldn;t you have said the bit about it being powered on BEFORE you said move the axes? Im crying lol

Sorry about that I see your design course after I commented.

If you have not 3d printed before would it be a idea to practice on pla before trying to use abs, also if there's no programming for what you want how do you go about creating your design for slicing? Would abs be better for slicing in mid air as it can be cleaned up?

I was recently offered a new job within my facility as a 3D printer operator. I was going into this with almost zero knowledge. Thank you for this, it gives me a slight foothold on the promotion ❤️

I use a cheap glue stick and it works just fine

is that a Havit keyboard i think i have that exact one.

I am using Anycubic M3 max for Chem Printing. I am having issues with areas of the Object Files in Chitubox coming over from Blender geting walls, and or areas that are not on the model, but for some reason the slicer is adding them in there.

This was really helpful

Thank you for making this video I've been having treble with 3d printing for two weeks now and this video really helped

4 or 5 years. Do you not know?

Hey I got some questions for you if you have some time to help me out with them

I've often found myself stymied by 3D printing way too often. I started out quite a few years back with a simple Monoprice Maker Select V2, and I mostly had issues with corner adhesion. Every time I'd go to level the bed, I could never get it properly leveled either. When I tore the machine apart, I found that its carriage plate was a fairly thin piece of metal that was anything but level. The issues with that printer caused me to stop for a few years, but eventually, I decided that I'd put a bit more money into my next printer(s) to ensure that I got something a bit nicer. (In other words, hopefully with less issues.)

Right now, I've got a Creality CR10S Pro V2 and an FLSUN Super Racer. With the Creality, I keep having issues with the left Z-axis side drooping (likely due to the extruder motor being on that side) causing difficulty in leveling the bed. I'm not entirely sure if that suggests that I need to just tighten the V-rollers a bit or if it just needs to be checked ever so often to ensure proper alignment between the two sides. ...or just convert to direct drive and drop the bowden! 😋 I also think it's disabling the heated bed at some point during printing, which is causing some lifting off the bed. The FLSUN is my newer printer, and I ran into a bit of bad luck there as the LCD's touch functionality refuses to work. Fortunately, I have a Raspberry Pi lying around, so I can just upgrade it to Klipper and ignore the malfunctioning hardware.

Moral of the story? Spending more money won't guarantee a lack of issues!

Im surprised you say PETG and ABS is cheap whereas PLA isnt. In the UK its very much the opposite. PLA is almost always cheaper than the other 2, even the fancy silk rainbow types are cheaper than basic ABS. Even PVB is cheaper than ABS for the most part.