Комментарии:
have you tried printing wood filament with this? how did it go?
If it didnt work well, are there any other printers / mods you would recomend?
I need your help please...I am about to buy my first printer...which one do you recommend...1) sovol sv06 or 2)ender3 s1(not pro version)?
Ответитьwould it be possible to use the prusa MMUS with the sovol sv06, or would I be better off getting the sv04 for the multiple extruder?
Ответитьso right after my 25pt bed leveling, I did the probe z-offset and needed to go down around 6.5mm until just scraping a piece of paper. the nozzle crashed and dug into build sheet. did I do the z-offset incorrectly, and how?
ОтветитьYou forgot to mention one more con...really weak magnetic PEI sheet 😁
ОтветитьEnder 3S1 or This Sovol? Which one is the better option for a newbie like me? 😅
Ответитьwhere did you find that restraction settings the manual i have doesn't seem to have it?
ОтветитьI really love your videos, when I first saw you i was like omg how old is this girl like 9 and shes a professional.
Are you able to upgrade this thing to print things like PC nylon and other stuff or is it un upgradable easily?
Thanks, the prusa slicer config helped a lot getting up and running
Ответитьyou no longer can use the mk3 setting because it wont let you edit it
ОтветитьJust bought one off your link. Love your reviews.
ОтветитьNickel plated copper heatblock, and nozzle by default would have been cool.
Ответитьgood printer, going to pick one up!
ОтветитьWOuld love to see a guide to what 3d printer you recommend for starters. we are looking to get one but don't know where to start
ОтветитьWonder how the auto bed leveling would do with an all glass bed. After this video I thinking about getting one! Well done.
ОтветитьHi. Enjoy your videos. Extremely qualified and filled with tons of information. Well done! Would you do a klipper install tutorial video for this machine? Many thanks in advance.
ОтветитьThanks for the info, ordered 2 on Amazon this afternoon. Was about to buy the builder version of the prusa. Thanks for saving me a ton of money
ОтветитьIs it as quiet as a prusa?
ОтветитьThank you for the detailed and useful review.
ОтветитьIncredible review as always.
Can you review the SV06 Plus?
Too bad i didn't pay enough attention and focused so much on the Neptune 3 Pro. This one could have been a good purchase too, the price is similar
ОтветитьWas the micro SD card negative because it wasn't full size because I've been told by many people octaprint works just fine when hooked up to the micro USB input next to the micro SD card slot as long as you make sure it's a data cable and not a power only micro USB cable?
ОтветитьGreat review.... How was the fan noise and overall noise compared to prusa or other printers?
ОтветитьAre you planning to review the SV06 Plus?
ОтветитьNice video! Just started using PrusaSlicer with my SV06 and noticed that the bed and nozzle heat at the same time. It would be great if you would post instructions on how to heat these items sequentially as is done in Sovol's version of Cura. Any suggestions?
ОтветитьHello, I hope someone can help me.
I have the problem that I can't print Pla from "Das Filament" with my SV06 :(
After a while, the extruder "scrapes" the filament at one point in such a way that it is finally no longer fed. I had no problems with other filament manufacturers. What could that be?
Thanks in advance :)
I hope Sovol sends some comission to Prusa for duplicating their machine. I hate this sort of shit.
ОтветитьI'm curious about the carpet/fabric on your workbench - is this for sound absorbtion or similar?
Ответитьlove your reviews and overal parts breakdown really good. Is the person hosting an adult? Haha Well confused they look so young but speak very mature.
ОтветитьProszę o test s07
Ответитьsovol a clone of prusa... prusa a clone of ender 3 .... ender 3 a clone of a DVD writer ... so....hmmm
ОтветитьCan't wait to see if you get a SV07 to review and what your take will be.
ОтветитьGreat review, thanks!
ОтветитьLove your vids, but I would rather hear the machine instead of the "canned" music...please?
ОтветитьAurora, do you intend to test the Sovol-SV 07 Klipper? Thanks.
ОтветитьThe z-axis bed leveling was reported in an issue with the creality board they basically copied because it doesn't have separate z-axis drivers, just two separate connectors.
Someone mentioned that in a review of the creality 2.4.7 board and almost off by the same amount which I was looking to get for my SV03, but I would rather have two different drivers for z, and I want the option to use dual extruders. I am looking at different boards, like makerbase and the mellow fly, which are very similar.
chances are they used that screen because it is well supported in Marlin, and everyone has issues with the proprietary drivers used in the color screens. Plus it was an off-the-shelf component.
Anyway, not the first review of yours I have seen but I really do like them. :)
Hello @AuroraTech
I just bought one for amazing 205€!!!!!
Its a Awesome printer and the only problem i have are the linear rod noisy bearings..
YOU ARE MAKING AWESOME REVIEWS!!!! I really like your vids and keep going!!!!
Can you really print at 275 ºC with the stock hotend? My manual says to use it bellow 260 ºC
ОтветитьGreat review as always! I'm looking forward to a larger format version with Klipper, WiFi, USB, and enhanced part cooling.
ОтветитьI haven't bought a printer in months, but whenever I do I come back to this channel knowing that there will be clear and well instructed information for it. Thanks for the hard work Aurora.
ОтветитьI just bought and received this printer in the mail as my first 3D printer. After being into radio control aircraft for two decades and electronics for near a decade, website building and hosting, and more recently, some more serious computer programing, mostly microcontrollers. From the reviews and instructional videos I have seen on this printer so far, it seems to be somewhere between a pretty good clone of a 'higher end' printer, to something akin to a damned good clone of a very good printer. So what is this? Because I remember the 'cheap' knockoff of the SAB Goblin 380 helicopter, which was the Devil 380, by some Chinese brand which I cannot recall off the top of my head. The speculation was that the Devil would be a cheap spare parts box or a practice bird at best. It turned out actually significantly better than the 'real thing' in many ways. Many, many owners of the 'real' one would buy clone spare parts as upgrades. This company went on to use that R&D experience to produce some damned good kits from what I remember from that time. Could this be a somewhat similar situation? I hope my choice into my entry into yet a new hobby in which to better facilitate my other hobbies is a good choice.
Ответитьmine will be here wednesday thanks to you Aurora! :D SO excited!
ОтветитьThe level of professionalism here is outstanding. Thank you for the unbiased report.
ОтветитьThis (non-Klipper version) or the Ender 3 V3 SE? Both 240 CAD for me after savings...
ОтветитьAurora could you pin the edited start and end gcode you have for the svo6?
ОтветитьCongratulations on the video!! On the Sovol SV06,
How can I configure end-g in prusalicer when printing in samelayer, blocking engines when changing color. I'm using Marlin (legacy) firmware.
Thanks
Hello Friend, I bought a Sovol v6 60 days ago and I'm struggling with bed adhesion. The PEI is not holding the prints, and I even had to buy a new Hotend set for a complete replacement because plastic got stuck when detaching from the PEI, damaging the entire Hotend. Could you tell me what I can do? I'm almost considering throwing away this machine.
ОтветитьIs here someone who has fixed the auto-z-align-problem with the SOVOL SV06?
Everytime I start the "Auto Z-align" the printer starts moving, stops and the display shows "Driver error: PRINTER HALTED please reset". I already installed the latest firmware from a new micro-SD-card, but i never got farther than the Auto Z-align
With my Sovol sv06 both z-axis profiles where bent within a few months. Sovol also can't supply spare parts so the printer is garbage now.
Ответить