NEW MJJC FOAM CANNON S v3 | How does it compare to the Foam Cannon Pro

When are will the MJJC S V3 Foam cannons be back in stock?

So what soap foam do you recommend to be washing a Black Chevrolet Suburban?

Just ordered the pro v2 from your site because of your reviews. Thanks for the info. Super excited to get it. I've been doing rinseless but i miss some good foam party action.

The 20 dollar sunjoe works way better I bought that mjjc on eBay was pure crap I gave it to a local detail shop thought maybe they could get it to work they threw it in the trash said it was cheap China junk lol hadly any foam at all

Have you seen the mjjc red inserts for their foam cannons? Is this the same as the auto metering tips from griots just for the mjjc cannon?

So there's a Pro V3 coming

hi i have Comet EMT 150pro pressure washer can you suggest me a foam canon?
thanks

Great reviews and thanks to you, I've gone down the detailing rabbit hole.
My question is , is Tucool Racing and MJJC the same company? They have a similar product and the Tucool foam cannons are the only other one except the MJJC to use the 3pc foam maker filters.

I'm going to buy the v3 from you. Thank you for these helpful videos

Only gripe with the new one is that is uses a clear plastic that even seems thinner which usually doesn't hold up to uv and element exposure, that it shouldn't see much of, that might make it decay faster than it's predecessor. It also leaks excessively when turned up side down.

Hey buddy, it’s seems the mjjc foam cannon isn’t available on Amazon. Or have they rebranded

Where can I get the pro v2? I didn't see it on Amazon.

The dilution is different though as each lance will have it's own draw rate so regardless of whats in the bottle, what comes out the lance will be different unless you calculate flow rates & then work to PIR rates. The review is completely flawed from that point forward.

I appreciate all your content Josh, your my go to guy for detailing information.

I ordered Version 3 from you. Thanks again fur your content!!

Just ordered me the SV3. Can't wait! ❤

My sv3.0 bottle broke on the first drop 😭

dude you talk to much just go with test sheeessh

Where can I get the MJJC Pro?

Just received my new MJCC S v3.0 and I can’t believe how much foam it’s making with my green works bucket portable power washer with only 800psi and 1gpm with 1.1 orifice and Adams mega foam, it’s unbelievable 😊so happy.

Josh, I've always enjoyed keeping my car clean, but I wasn't in love with my last car. I've got a new car I love and finally getting back into car car after 9 years. The market has totally changed. I love the newer products, they are easier and more fun to use. Watching your videos brought me up to speed on all the new innovations. I picked up a pressure washer, MJJC foam cannon and stocked my garage with a combination of Chemical Guys and Meguiars products. Thanks for your content!

Good morning Josh, is the MJJC Pro V2 still your favorite cannon?

I choose Pro which has Balance, a wider container mouth opening, threaded stays on better, a nice container shape, and is affordable. V3.0 has a clear bottle and easier-to-see markings, if dropped the bottle may pop off or crack, more expensive than Pro makes little sense.

Look you can look the other way and say " no big deal" until the bottle slips from you hand and cracks the NOT SO STURDY PLASTIC CONTAINER on this model!

SORRY, BUT I'm sticking to my argument! The V.3 S is NOT A BETTER VERSION BUT EXTREMELY INFERIOR and LEAKS. PERIOD!.

IF YOUR GOING TO ADVERTISE THIS PRODUCT AT LEAST STATE THE VERY IMPORTANT DETAIL THAT ITS NOT LEAK PROOF AND LEAKS! OTHERWISE YOUR MISLEADING THE PUBLIC JUST LIKE MJJC IS DOING RIGHT NOW!

no one talks about the HOLE in the cap. It leaks "slippery" soap any time you tilt or shake product. it's a bad design. I want to return this and go to V.2 PRO. It's weird that all if a sudden MJJC is not responding to my emails, they sure were when I wanted to buy!!@ i hope I get a resolution soon!


YOU CAN EVEN SEE IT LEAK IN YOUR VIDEO, YOU WERE EVEN SURPRISED!!!

DONT BUY V.3 WARNING!! it leakes all over the place. the cap had a hole in it so soap spills on you hand making it slippery and prone to slipping out you hand. the container becomes a slippery mess!!

EXTREMELY BAD DESIGN. FLAWED AND THE CONTAINER IS SMALL AND HOLDS very little product. it would have been nice if they increased the volume to 1.5.

I am returning mine!

Hey everyone, I have a question I have a 3400 psi power washer and I was wondering if I were to change the orifice to 1.1 in a foam cannon would that affect the power washer so I can get better and thicker suds on a car/truck/Camper or trailer?

How do I convert the 3/8 quick connect on the Mackillans swivel hub handle to 1/4?

Any thoughts on the MATCC foam cannon?

FURTHER YOU ONLY NEED TO USE 3 OZ as long as the soap is thick the foam cannon will work.

FURTHER NONE OF THEM ARE BSLANCED WHEN YOU PUT THE WAND ON IT. NONE OF THEM WILL STAND UP ON IT OWN.

I USE A HOOK SYSTEM TO PLACE THE CANNON IN BETWEEN USE.

Do you have a discount code to order?

2 inches is pretty big thx

I have the S v3. works great but tips over really easy. Kind of annoys me but it does work well.

I wonder what orifices these have over the cg because I have the torq foamer from cg and it has always sucked and doesn’t do well. I ordered a cheap clear one from Amazon for 30 just now and I’m sure it will perform better than my current one and it comes with a 1.1mm and I’m using a gas washer with 2.4 gpm

Hi, I just ordered this cannon from the website. I have an electric pressure washer 1600psi. Wondering if when using the cannon is the pressure washer hooked up to a garden hose water supply or is the foam just being produced from the solution and water from the cannon itself? Thanks in advance those who answer!

My new S v3 has a small hole molded into the lid, apparently to allow air to enter the bottle while dispensing the liquid. If the foam cannon tips over, it leaks, which is rather annoying.

Hello, how many ounces of shampoo did you use for the test?

Wish this had the inner threading to attach smaller bottles like the pro v2. Still debating between MJJC and Griot's. I can get the S v3 for $40 and Griot's Boss for $60. Which one would you recommend at that price point? TIA!

Didn't I watch a video with you saying you sold the MJJC cannon unbranded for cheaper?

Hi Josh, recent subscriber to you channel and really like the content and detail you put into it. It’s not easy to not only make the video, but also to keep the info real, practical and truthful. I don’t think I’ll every technically wear out any of the MJJC foam cannons, but I have plenty of experience with o-ring seals on hydraulic fittings and believe me they will fail over time. I’m sure that you will have the those foam cannons working hard a lot, every day, unlike a guy like me that may use it once a week, and that depends on the weather. Besides trucks are make to have a little mud on the tires.
I’ll be getting the Pro V2 from you, for making this video for us and looking forward to some tips and reviews on care cleaning products from your past content. Keep up the great work and will pass it along.

Hi, Do you currently have the MJJC Pro V2 in stock?

Sorry MTM still the best

$90 for a Chinese made foam cannon?
I'll stick to my $50 italian made one and buy a $10 replacement conical bottle.

Never order from MJJC. I just got scammed trying to order a V3 Foam Cannon from their website. My shipping label came back as “counterfeit” and not unable to see where my item is… always order from people such as josh or other legit sellers… never from MJJC.. they rob you.

Was here to check out the MJJC V2 and I’m still thinking it’s the one to buy. Prices in the U.K. are a little cheaper atm but that can change.

I got the V3 and I kind of wish I got the pro. I'm not too upset as I took a gamble and got mine off of TEMU (my first purchase) Shipping wasn't fast, about a week. Neither is the packaging (bag over the box). But, it came in one piece, is legit (from what I can tell), and was half the retail cost.

$85 -$90 for a foam canon is a total rip off. HF is $32 and that's all you should ever spend for someone not in the detail business.

Is there a connector for the AVA presseurewasher?