Комментарии:
Excellent
ОтветитьAwesome review Gal! Looking forward for additional testing. Thank you for this!
ОтветитьI heard that DJI is going to release a v2 O3 air unit with 10km range (2.4 and 5.8 Ghz)
Ответитьoh very mixed results, at first bottom left was clearly better, then matched and then beaten by bottom left, and finally top right was best.... i assumed omnis up top and patch on bottom would be best all the way, but it looks like when the signal is weaker having the patch send or receive ,i'm not sure which, the patches did the harder work. great test, something to think about, when vista antenna is at a poor angle obviously the patch will do better in receive mode, but when vista antenna is in a good position, maybe its best to have patch in transmit mode.
ОтветитьAwesome. So the way that intuitively makes sense is correct. I didn't believe it when I was told to run the patches diagonally.
ОтветитьIf you do more tests place one or two wps behind you to check omnis performance.
ОтветитьSuper thx Gal. Question; did you test it also with standard antennas?
ОтветитьQuality stuff as always on this channel. Thank you for sharing.
ОтветитьThanks gal.
Can you make another test with a racer?
With low flight like 2 meter above the ground?
Gal, I'm interested in the mount and dji mount for the Mavic, do you have any more details on this , ie how is it powered, 3D prints etc
ОтветитьThanks
ОтветитьGreat work, I look forward to the follow up video.
ОтветитьLooking forward for additional testing. Tks! Keep up the good work!
ОтветитьHow did you power the Dji Air unit?
ОтветитьAir Unit Settings: 25mw, why?? set it to 700 or more?
ОтветитьSo the patch on the bottom gave best result then?
ОтветитьSo what are best layout?
Ответитьthank you verry much for efford!!
ОтветитьDude, you have interesting content, but the way you speak is super annoying and unbearable. Try to listen to your video yourself maybe? Why you stretching every word you say like that? It's super annoying.
ОтветитьIsn't your DJI drone video interfering with the test results of the air unit signal?
Ответитьi have watched some gr8 content from you reciently , your comparisons and most of your tests in general are very Thorough , gr8 work thankyou
ОтветитьI just noticed right before turning around the top right image.. patches on the RX ports has better Mbps for a little bit. wonder why
Ответитьthis work with dji FPV Drone ?
ОтветитьNie rozumiem, jak mają być zamontowane te anteny? Latam z DJI FPV.
ОтветитьVery nice work Gal, thank you for posting..
ОтветитьI set it up like the bottom left box... I'm getting about 1000 feet before losing video signal?!?! What am I doing wrong? It is a clear view to the quad on a clear day, antennas up, sitting facing the quad. :( Please advise if you have ideas. I'm very disappointed in my range yet I see yourself going so far... I have the DJI controller, DJI goggle V2 and the croc baby 4 LR caddx vista
ОтветитьGal great piece of work and I wondered have you done the test on the version 1 goggles that I own? At the moment I have true RC Stubbies right up and down with X Air left side. Thanks
ОтветитьКакая антена лучше для 5.8 ?
ОтветитьVery thorough and unbiased review. Summing up everything in a text format is also very good way for subscribers to go back and read at times when needed. Keep up there good work man.
ОтветитьThanks a lot for your effort...is it possible to use two camera with the dji fpv? I get the view from one camera and then switch to the other ?
ОтветитьHi if im using 2 truerc xair 2 pcs, how do i mount it? Thanks
ОтветитьThis is exactly how reviews should be done!) the most useful reviews that I watched ever! thank you so much!
ОтветитьWould you happen to know what channel you were using to get the best range,thank you
ОтветитьThanks for the test Gal, very informative. Im considering a set for my V2 goggles. How would you compare the stock antennas to the Iflight Crystal set? Big difference?
ОтветитьThis video is why I subscribed to your channel, it’s perfect: answer early in the video with proof afterwards for those with interest, no pointless chat, and a well-explained experimental design. Fantastic, thank you!
ОтветитьWhy not test with a range long enough to lose connection completely?
Ответитьso the best layout was patch on top and omnis on bottom correct
ОтветитьI don’t understand / So which should I get ??
ОтветитьIf I change my throttle settings in the goggles would that work on every quad?
ОтветитьWell what is the best for v2?
ОтветитьPuedo usar fpv goggles v2 en mavic air 2 es compatible si me lo compro
Ответитьso to check a newbies understanding, on the top of the goggles I need 2 omni antennas, one on each side, and then I should connect my crystal (patch) to the bottom connections, is that correct? I get pixilation after 100m already
ОтветитьWould u say the difference from stock is extremely noticeable? I've seen conflicting data.
ОтветитьIs this compatible for dji fpv?
ОтветитьWhat happens if one uses SMA splitter and simultaneously connects 8 antennas to FPV goggles (4 omnidirectional antennas + 4 patch antennas)? Does it increase range/penetration? What do you think?
ОтветитьWhats the verdict?
Ответитьwitch setup was the bottom left? that summed to be the best.
Ответитьiflight sucks, I tried them out for a couple months and there is 0 improvement.
ОтветитьDid you leave the settings in the goggles to auto so it’s still able to switch to the best signal or did you change it to manual 5.8ghz only?
ОтветитьAwesome experiment, thank you. What if I put patch on all of them ? Will it improve bitrate from your experience?
Ответить