Easily improve your DDR5 XMP's performance // for ASUS motherboards

This works for M-Die on a 14700K at 6400CL32, 8 hours of Karhu passed, Thank you!

Have a cheap ripjaws 5600. Would this work?

Do you have a ddr4 timings videos?

I absolutely don't wanna know whats those timmings are, but is it safe for everyday gamming or actually for hardcore overlocking?

Nothing works for me, have 6000mhz gskill set on same board and 12900k CPU can post at 5800 standard xmp2 at 1.35v vdd and vddq super unstable and crashes no matter what I do with voltages even 1.4 and above, got ram cooler sits at 50-60c under load only stable at 5400

Why is my “REF Cycle Time” grey, I can’t write in it. Just “…Cycle Time 2”.

Hi...do you maybe have this type of settings for Hynix A die ?

Edit: as I was typing this, I heard you say I can use these settings with speeds up to 6800. Maybe I'll just drop them to 6600.
I have a 14900k on the new ROG Strix Z790-E Gaming WiFi II that claims to be capable of 8000mhz DDR5. Thought I had it stable until last night. I plan to lower my 2x24 kit to 7200 tonight since i had a 2x16 kit stable at 7200. Can i use these settings with those speeds?

i got +50 FPS on valorant with this insane.

Shit tried this on trident g skill 6000 kit and couldn’t get it to run at all. Even if I tried increasing voltage to 1.45. Tried to loosen timings and still nothing.

I must be doing something wrong as with these timings on a G.Skill DDR5-6000 CL32 2x16GB Kit, Intel 13700K and Asus Z690, the motherboard won't even post. Any ideas?

So does no ine have 64 gig ram? Looked througjojt every single one ofnyour videos and didnt see a single 2 sticks of 32 gig ddr5 ram video

=========> WARZONE: advice please on which Corsair Dominator Titanium 32gb (2x16gb) rgb kit to buy with a single goal in mind: the absolute HIGHEST fps possible in warzone. 14700k + Tuf 3080 + Strix z790-e (4-dimm board, i will keep 2 slots empty). Choices are: 6000/cL30, 6400/cL32, 6600/cL32, 7000/c34, 7200/c34, 7600/cL36.
Please help, thanks. 🙏🙏🙏

these dont work at all for me for some reason

I have a better kit than this and these timings won't even post

Asus Z790F, TEAMGROUP T-Force Delta RGB DDR5 Ram 32GB (2x16GB) 7200MHz PC5-57600 CL34 A-DIE, Intel 13700K. Single RAM stick in A2 or B2 runs XMPII at 7200 fine, memetests no errors. Both RAM sticks single are fine. When I use 2 sticks in A2 and B2 (dual channel) the whole thing is unstable no matter what. BSODs, corrupt apps crashing, total nightmare, even stock settings at 5600.

cant get these to post at 8000 when changing the timings and voltage from xmp tweaked, using 2x24gb gskill kit, its fully stable at 8000 xmp tweaked. the only main difference and potential issue i saw is that i cannot set the timing DRAM REF Cycle time , its grayed out, while i can set DRAM REF Cycle Time 2, which is what i did... but like i said it wont even post.

First off, thx for an awesome channel and all the good info.

Just ordered a Asus board and Corsair CMK32GX5M2B6000C30 memory. After googling my ass off Ive come to the conclusion that I bought Hynix from the 30-36-36-76. Have I understood this correctly? :)

I dont even get system started on this settings

lol used this exact RAM and one dimm died in a week... besides corsair needs different software for rgb too. im avoiding corsair now .

This video helped me a lot setting my xmp to be stable on z790 Asus board with gskills , which did not want to be stable on the stock xmp profile, thank you!

can i use these with same ram just 6000 cl30?

This is nice please can you help I have a 6000MHz RAM and it cannot be accessed. When I do xmp and enter, it gives me a blue screen. I tried, but what I found is 5400MHz. I did not use the timing because I do not know how to do that please some help I have z690 f gaming i9 12900k

I have the neo trident ddr5 6000mhz ram kit, but my bios allows me to select EXPO Tweaked . If I have Tweaked available would that be better then the manual timings or worse or negligable?

bro's ram more expensive than his GPU

Hey BZ, I’m still struggling with DDR5 a year later…I know this is an older vid but I’m trying to run these Corsair Vengeance 4x32gb at 6400mhz, which is what the DIMMs are rated for. Any DOCP I, II, or Tweaked profile won’t boot. I feel like it needs to be manually tuned even to hit 4800 or 5200. If I bypass DOCP and set to manual on an ASUS X670E Hero can I use this voltages and sub timings?

i updated my bios to v2703 (latest), i set my XMP 1 on, then started crashing in all games. few days later i set my XMP to disabled, set everything default, rebooted to windows, it ran fine. went back into bios to re-enable XMP to 6000mhz like before at XMP 1 and it now works. weird. z690 tuf gaming plus wifi, hyperx 2x8gb 6000mhz xmp ram. also, is it normal for the PC to restart several times with an orange light, then run fine after a few restarts & load into windows properly on when i enable XMP to 1?

I am shocked nobody mentioned your voice in the comments - it's hard for me not to, not that there is anything wrong with it, but it does sound quite familiar, couldn't help close my eyes and imagine it from the perspective of that character, 'nuff said, I'll let people figure out what I am talking about :P

Hello everyone! I have a asus motherboard rog maximus z790 hero and now a have a issue with DRAM VDD and DRAM VDDQ voltages. my RAM is Kingston FURY Beast Black RGB [KF556C40BBAK2-64] worked on 6000Mhz 36-37-37-70. But today it became a not stable... As i can find 1 dimm work fine, but second, stable only at XMP1 profile with DRAM VDD 1,09V and DRAM VDDQ 1,1V instead 1.25V from XMP1. But more intresting that i can`t change dram voltages manually! Motherboard ignoring me with this dimm in all slots... Who can tell me whats going on?

What about using asus settings on asrock?

cool .. if i want 6400Mhz same setting or must be change something plz reply @

Works just like that and about same performance increase. Great free performance 💪

Why are AMD RAM Read/Copy speeds so slow compared to Intel? Intel is getting +50% performance in that category over Zen 4. On AMD it appears to be hard capped at 64GBps.

Does it work with hynix ddr5 bigger than 16gb? Like 48gb stick x 2 dual channel for 96gb setup?

Hi BZ, so , I know this video is a year old, but I'm running an Asus motherboard B650M-A AX II with DDR5-6000Mhz RAM and a Ryzen 7 7800X3D chip and its crashing my games, when I underclock the RAM to 5200Mhz it runs fine.... I updated the BIOS on the Asus Board, but still crashes. Any ideas what could be causing this or how to fix it? thanks

Can we have a updated Asus am5 DDR5 guide like this… Asus screw over BIOS update. Can’t find any of these settings on ver 2.22.1284😢

How do you get memtweakit to work? I've had the program forever now but haven't found an answer. z690 maximus extreme, 13900k. tforce 5800 cl 36

Thanks!

FYI. Turn on Memory Context to retrain your memory if you are overclocking any memory timings. My PC 7950x / Asus B650E and 64gb DDR6000 CL30-38-38-96 along with Buildroid's custom timings would instantly BSOD on boot or wake from sleep/hibernation. After renabling Memory context to retrain before boot, BSOD stops and system loads normally.

I neeed help to make my ram stable pls help

maybe a little niche, but I'd like to request a subtimings guide for dual rank DDR5s as well! for instance G.Skill 64GB 6400MHz CL32 kit (2×32).

Let's talk about the elephant in the room: where to get that wallpaper?

Hmm I don’t have extreme tweakee settings on my Asus board. X670e-a. Been trying to tune my 5600mhz 64gb ram cl36 Corsair dominator but I’m a complete noob with ram :(

Will these settings work with 7600 A-Die?

Have you done me of these for a die and asus board

Hi I'm running all the timing the same as in this guide and the ram is running at 6400 MT but i started at 70 latency and now im at 65 which is 10 slower than yours any ideas why that could be please.

You saved me from formatting my pc. Thank you so much

Lowering the CPU Agent Voltage was bad advice! It fuked my otherwise stable CPU tuning....