Undervolt your GTX 1070 for more FPS! - Tutorial

I can get the minimum possible undervoltage in the 1070 Galax OC Mini, the same design as the founders, in 700 mV at base clock of 1518.
At 1969, only at 900 mV tho.
You should try because not all games require 1900 MHz.

Yo, thanks for tutorial ! will this work well for 1070ti asus cerberus ?

I have 1070 palit 8gb gfx, i followed the tutorial and heaven engine couldnt handle it. I was thinking maybe because I have 1440p monitor and this tutorial was made on 1080p monitor. I kind of tried to find the right spot between 1700 but it feels like i have less fps. Could you maybe calculate what settings i should lut in this case? Thanks

hello bro, what was your power consumption when you undervolted your 1070? i'm planning to upgrade my 960 to a 1070 but i'm worried about the power consumption because it has 1 6pin and 1 8 pin

Upping the memory for me caused hardware errors durring my testing and putting the Fan volt and temp to the max caused instability for me might be wattage wise

I have 1070 strix sli I would just apply this to both cards????

im using 1070TI is it the same with no TI?

I have a 1070ti and i've follow your tutorial step by step and when i apply the 1900, my gpu fans are going crazy ..
This is normal ?

tq so muchhh

hi! I did everything in your video, and my gpu runs 80-89C, is that normal after doin this? Or do I have to turn back the memory clock a bit?

edit: I didn’t get any fps difference because I couldn’t raise the memory clock, how do i get more fps without messing with the memory clock?

Managed to get my 1070 to run stable @1850Mhz, @ 900mV. This significantly reduced the sound my GPU used to make, it also gave me more stable performance in games. Really appreciated this video.

Broo, you are the BEST, my video card 80-90celsius you lovee <3 55celsius gta v low, 65-72celsius full game and 100+fps <33

Right method, is:
1. RMB on point with 900mv hold shift and drag the whole cure to the point when 900mv = 1900
2. SHIFT + select all point on the right of the curve and drop them below, no matter how much, it will align to 900@1900
With this method you will get more stable results, as power increase with frequencies is no linear and you will not upvolt freqs which are lower.

Hi, Would this work for a 1070ti?

The highest cloc speed my Galax Gtx 1070 can go in the 900mv curve is 1800, its unstable after that. When i first tried 1900mhz in 900mv curve i got a few black screens and screen tearing, heaven crashed but thankfully everything went back to normal.


Did a few more tests here and there and eventually got to 1800mhz.


So quick reminder to everyone whos interested in trying to undervolt their GTX 1070 using this tutorial - ALWAYS REMEMBER EACH AND EVERY CARD WILL BE DIFFERENT.

i tried doing it but my gpu clock is stucked at base 1518 MHz, cant change it to 1900 MHz, idk why, can you help me?

Hey, man! Love your video, help me alot! Do you know, by any chance, would this be good to do with RTX 3080? And if you think yes, what would you do?

Thanks for the tutorial, now i can play actual games without hearing planes, also i accidentally set the fan speed to max while following tutorial and uhh my ears went boom, but that was a me error lol

do i really need to have the heaven benchmark app running in the background when doing this?

thanks man

When i do this my 1070 goes to 670 mhz core and thats it , and on default it is at 1000mhz , how do i go 1900??? memory stock is 4000. Pls help!

well it crashes every game i ttry to open on these settings i have gtx 1070 msi the red one

Good morning. Do you happen to have a curve profile for the gtx 980 reference undervolt? I would be grateful

I have a Palit 1070 Super jetstream. By default my card runs at 1911-1949 range clock speed at 70-72c running for 15mins in Heaven Unigine. I tried what you did in the video even with 1900 only but my pc just blacks out and crashes. Should i just add the +500 memory clock and still be safe?

I have a Palit 1070 Super jetstream. By default my card runs at 1911-1949 range clock speed at 70-72c running for 15mins in Heaven Unigine. I tried what you did in the video even with 1900 only but my pc just blacks out and crashes. Should i just add the +500 memory clock and still be safe?

can u do a custom fan speed? most game i play i have high temp and fans make noise

i do this but my gpu mhz doesnt change it does for a second then goes back to 1600

this tutorial is excellent, my old 1070 that used around 77 when on heavy load now stable around 60 degree. its amazing.

I have asus turbo edition when I raise the curve from 900 to 1900 or even 1850 the heaven benchmark running in the background gets stuck and becomes irresponsive. any fix for that?

Hello thanks for the video nut why stand by My pc around 1300 mhz gpu and not 1900 ?

Brooo😂 my shit was cooking at 78c now I’m at 45-50 dude hell yes thank you brotha

what about mobile?

Any chance to increase fps even more than this for the gtx1070?

Thank you for the tutorial!
My 1070 g1, now uses 35-40W less and it is 10°C cooler at the same rpm.

Just to clarify and make sure, the lower I go with the MHz, the more stable it gets right?

I was able to get it working on 900 mV at 1859 MHz
So just to be super sure that it is 100% stable and reliable, can I leave it a bit lower like 1838 MHz? I don't mind 2-3 fps performance loss, I just want it stable withou any glitches and possible audio interference.

Would you recommend to go lower in MHz for reliabilty?

Is it safe to use gtx1070 for 500 watts?

Best setting for manli gtx 1080 ti
Please

I just bought a GTX1070.
This Tutorial helped a LOT!!!!
My 1070 is cooler and quieter now!
THANKS!

If i do that my pc crash every time 😢 i dont know what to do because my games crashes all the time

My MHz stays the same can you help me with that:) nice tutorial btw.

GTX1070 MSI AERO
Core clock 2100mhz
Memory clock 4176mhz
76 degrees with fans on 70%

yes

it works for asus rog strix scar 2 ? can you help me i got alotf of fps drop laptop

if i have a lap top will all the fan options be locked???

temps went from 70-80c to about 60-70, thanks means a lot❤

I did it but it says 600 always idk what to do

The video is already 7 months old but it helped me a lot, I was able to put my aorus gtx 1070ti at 2000Mhz with 0.975V, and with a memory clock of 675+, and in FurMark it only reaches 73 degrees Celsius with the coolers at 65%, Thanks

my gtx 1070 runs at +139core stable for 6months. never went over 65c, gigabyte g1 gaming card :3

thanks so much for this vid. my 1070 gtx was crashing ALL the time, and it was getting worse and worse. Now, after following your vid, it simply does not crash anymore!

sure but mine runs at 607 hurts even if i turn the clock up where you said. makes no sense to me why mine is gay and yours isnt