Raspberry Pi FluxNode Setup Guide

Mounting failed after reboot it show while booting mount failed and after I log back in and if I check media/ssd with ls command it doesn't show lost+found.. What to do next?

and now i have the problem that i can`t istall docker over the multitoolbox : Module: Install Docker
================================================================
🚨 ERROR: OS version Ubuntu - jammy not supported
🚨 AVX CPU instruction set not found and is required to use MongoDB on jammy
🚨 Ubuntu 20.04 LTS is the recommended OS version... please re-image and retry installation
🚨 Installation stopped...

Hi i had after mounting this problem :
mount: /media/ssd: wrons fs type, bad option,bad superblock on /dev/sda1 ,missing codepage or helper program or other error and i fixed it in fstab with using default value: UUID=your id /media/ssd ext4 defaults 0 0 now its working

Hy i am using a pendrive in the place of sd card is it okay..

Hy my ssh is showing inactive or dead..

every time I set up a new node I follow your lead. The only thing I am having problem with is to mound the SSD....

thank you for this tutorial
I have a question at home the synchronization takes several days with a failure
is it possible that the nvme does not mount?
downloads can be found in home/ mycumulus
THANKS

dose any know if i can use a raspberry pi to mate a smart node btrm or rtm

Hi do you know if i can use the board of ( bobcat miner 300 2gb ) for do this?

Great video....did I miss where you told the install to use the SSD versus the SD card. I could see in the installation script it was using the /home directory

Anyone here have the issue that the node p/w is returning an "access denied" error? I wrote it down so I know it's correct.
I was nearly up and running and then failed the benchmark for upload speed. A day later and I return to setup and pw for node is failing and I've tried going back to start but get other errors there also. Anyone have suggestions?

hello ,why my Flux Blockchain Sync and Status sync connections always 0?

It's done

Hi there, great guide! I'm up to the point of 'discovering' my M.2 ssd but it is not showing up on the fdisk command. Just the sd card with os. I've reseated it a few times. I am using the Argon One case. Any suggestions?
6 days later: the ssd was corrupted and exchanged at the store

It is a great video. I make my own flux node this instructions. I have Dynamic IP, and always crack down my node when ip is change. I make five times this complicated node. Always that problem is come. So, why dont make it is easier? Make Pi install Flux node boot file? Too complicated the Flux ecosystem now. 😔

As of 11/4/22, which Ubuntu OS would you download now that it's starting at :10.0.xx?
Thanks and great job with the video.

Very good step by step explanation. Great job!

Hey Hello, Very nice Video. I have a question. Is there a recent video? I have problems when I have to set up the ssd, files.... as i guess the Ubuntu is a newer one and the configuration are different. Would be nice to get any help. Thank you in advance.

Super clear thank you

I am having problems with mongoDB not installing. ubuntu 20.04.5...is mongoDB supported in this release, I know that in 20.04.4 worked fine...Is there any workaround?

Сколько можно подключить raspberry pi4 к 1 аккаунту и можно ли подключить ssd большего объема?

Just used this walkthrough. Only some small config differences, all easy to determine with common sense. Thank you for the video!

‘Lost+found’ is not found under ssd rather its in ubuntu pwd after boot. where am i going wrong ?

Everything fine until I got to the docker installation. Im using Mac M1 and I am trying to install Docker from Terminal on my mac but when I press 1 on the menu it gives me an error OS VERSION NOT SUPPORTED :( so I cannot install Docker. Any help would be really appreciated! Thank you

🔥🔥🔥

i have everything setup correctly but i keep having a IP issue. any way to correct this.thx

Great video and built 1st RaspPi4b 8gb Node. But.. its failing the benchmarks for CPU and disk writes. So little confused where to go to start looking at fixing that, be good to have a Common Problems setting up FluxNode be really useful. Guess i be heading to Discord channel to investigate.

Hi, I'm having problems with the ssd on the final steps when everything is working fine all the way up to the reboot and the I'm getting "give root password for maintenance"

Hi thanks for this great video !
Just one question : how do you handle your Public IP Address ? Doesn't your internet provider change it from time to time ? thanks

Guys, make sure that you install the Ubuntu 20.04 LTS version and not 22.04 LTS.
Took me days to discover that I had the never version. And that resulted in Mongodb not installing and benchmark failing.

after mounting ssd and rebooting i cannot ssh in all i get is connection refused ?

Writing superblocks and filesystem accounting information: mkfs.ext4: Input/output error while writing out and closing file system. Anyone have any idea how to sort the error out when creating the filesystem? Thank you!

I am getting below error. Please let me know if there is a solution for this
MongoDB was not installed...............[✖]

stuck at creating journal

thx so much for this guide...i was able to finish my first pi projekt and node....iam so hyped <3...great video

Can you provide seperate video on router configuration more detailed explanation

My fan keeps running even under temp settings. I updated Ubuntu, installed curl and fan script, set default fan settings and reboot. Also uninstalled fan script, reboot, repeated steps, same issue. Idk what I'm missing. Any suggestions?

How much time does flux daemon syncing takes, mine exceeded 2 days and left blocks count is increasing instead of decreasing. What would be the issue?

Thank you Johnny Sins! I don't know how you have time to do this between all your other careers, but you nailed it!

Is it possible to run Nimbus too on raspberry pi 4?

can 2 nodes run on raspberry pi 7inch touchscreen display(element14)?

Thanks to Goose and the rest of the team making it possible to work my way through the setup! The Pi is running happily with the confirmed node 🙂

At the final stage during cumulus node setup, status chances from started to DOS. Trying for past 15 days. Anybody please help

I tried this twice, I always error out after Imodify the fstab file, it doesnt like the uid=1001,rw,users says not valid UID?? Help?

Just wondering why the flux node needs 53 and 123 to be fwded. I'm guessing 80 is open to see the web front end of the flux node. Is the flux node really responding to dns/ntp queries?

Goose hi, thank you very much for everything. Great tutorial !! I followed your video and I am now running a Cumulus node with my little Raspberry PI with an external 240 SSD. Looking for ways to start my next one. Thanks again!! you are a star!!

Goose, I took a Gander at your video and now up and running successfully. I could not have done it without you!

Thanks Goose! I got my Raspberry Pi up and running a Cumulus node! At first, I made it all the way to the end and it would constantly fail the benchmark. I went through my Router settings and checked/adjusted the port forwarding like you said and that fixed the benchmark fail! I have very little experience thanks for the help!

Goose your a God sent! Appreciate your wealth of knowledge!