Комментарии:
After using the gimbal even more, I would like to put even more emphasis on the fact, that the original base plate is absolutely useless with anything a little bigger!
ОтветитьWill the Rs2 handle a C100 MKII as well?
ОтветитьDo you know if the stabilization provided by the Sony A&sii including the IBIS and Active Stabilization is additive to the stabilization provided by gimbals like the DJI RSC2 or RS2 ? Thank you.
Ответитьhello anybody knows how to connect my camcorder Canon XA40.? I already balance and put the cable but it doesn't show any camera in the app.
Ответитьi used the rsc2 with the sigma 18-35mm sonya7iii and mc11 converter, it was very jerky and jittery. Do you think the same setup will work smoothly with the rs2? or should i get the crane 3s?
ОтветитьThanks man! I think I understood now :)
ОтветитьWhich camera are you use
Ответитьreally wanting to see part 2, esp. to know about the rig and the extended base plate.
ОтветитьWhich lighting system are you using at the hospital with the grid
Ответитьi use this dji rs2 with FS7 and Zeiss CP lens, its work
ОтветитьI got the rs2.. I have also a c300 canon mark 1, but how can I fit this camera on the rs2? the camera touching the gimbal when I roll down
ОтветитьMy the best channel
ОтветитьDo you have experience putting your C200 on the RS2? Thinking about purchasing one for my C200! Thanks for the great videos, keep up the good work!
ОтветитьWheres the link for part 2
ОтветитьSuper useful video man. I have almost the same setup (Eos R6 + Canon RF28-70 f2), but I'm wondering if the RSC2 would be able to handle this front heavy lens. Or you think I'll be safer by getting the RS2?
ОтветитьI have been experiencing wooble on the roll axis on the rs2. Have anyone else has this problem and tell me how did you solve it? Its a real issue for me
Ответитьwould it be possible to balance an alexa mini on it
ОтветитьWhere can we see the commercial you shot?
ОтветитьHi, I'm alsow thinking to take the rs2 for my c200 but you maked me scare about the viewfinder 😅
ОтветитьGreat vid. I have a C500 mkii and have been experimenting with it on the RS2. You gave me lots of idea's. Looking forward to part 2.
ОтветитьWish they had made the arms a little longer, its impossible not to get roll axis wobble when underslung on komodo + medium/long lens. I have tried smallrig extended plate, counter weights, every motor adjustment & it's perfectly balanced on all axis. I hate this thing; never had these problems on other gimbals. It only works with small lenses.
ОтветитьI’m looking for a thin lightweight HDMI cable to use with my RS2. I EXTERNALLY record from my Sony a7siii to my Atomos ninja v. what cable do you use? Would you recommend it?
ОтветитьFor the canon c70...do you recommend the rs2, the crane 3s or some other gimbal?
ОтветитьHi, sag wo hast du die smallrig 3031 Platte bestellt? Amazon hat sie nicht lagernd und bei den deutschen Versandhändlern zahl ich 15€ Versand. Bin auch in Wien. Lg
Ответить@monkeypixels I do have C300mk iii and DJI RS2. I tried this camera with Canon 16-35mm lense on this gimble, but not sure why it shakes all the time... its wired to see that momvement. It works with idx mk2. Do you have to do any kind of settings for cinema camera setup?
ОтветитьVery helpful video, thanks a lot! Do you already know when you'll post Part 2?
ОтветитьCan't wait for the second part! What a great cliffhanger :')
ОтветитьLove this video!!! I got the RS2 back in November, and had to wait until December to get the small-rig plate so I could use my C200 on the gimbal. Question for you - I noticed your C300 doesn't have the viewfinder, did you get that removed by Canon? I'm thinking I'll have to take it off my C200, to properly use it with the RS2 so I can do underslung :O
ОтветитьPlease do a video talking about the Tilta ring set up, would really appreciate it!
Ответитьhow would it work with the Canon C300 MK2 and 18-80mm Servo lens (without the grip)? The weight with both I think is about 7lbs?
Ответитьtoooo much реклама блять
ОтветитьMan, I've been coming back and re-watching this video every day trying to evaluate if I should take the plunge on the RS2 for my c300iii. Can't wait for part 2 and seeing how the tilta accessories work!
Ответитьdo you think this is better than the Crane 2s?
ОтветитьNever doubted the RS2 for a minute!
ОтветитьI got the RS2 for the lighter weight alone. Now I'm amazed by how easy it is to use and set up. I'll be shopping for accessories based on your recommendations when Part 2 comes around.
ОтветитьI got the RS2 three weeks ago. Now it's the only one that I use! It completely blows the Crane 3S out of the water in my opinion.
ОтветитьGreat workarounds! At least you were able to make the most out of both the gimbals and accessories. Those who complain about the RS2 "not working" should definitely watch your videos!
ОтветитьHow much did your heaviest setup with the RS2 weigh?
ОтветитьCould you share your settings like motor stiffness and things like this? Your footage looks so smooth! I‘m just started to learn the ninja walk and I have these up and down moves in my footage.
ОтветитьGreat video tutorial. I think you got me convinced to get RS2. Thanks for sharing.
ОтветитьWhere are you from?
ОтветитьI want to see part 2
Ответитьawesome
ОтветитьDoes anyone experience a little bit of inconsistency with the follow focus motor? Like a slight jitter? DJI QC is garbage and their window of return (15 days) is very short. Trying to see if I'm the only person who got shafted.
ОтветитьWie heißt eigentlich das Lied in eurem Intro? Finde das mega
ОтветитьFantastic! I do have a question, I just bought one and there is a little piece that looks like a little arm with a cold shoe mount at the end but I can’t find any tutorials about what it is or how to use it. I am assuming it is some sort of arm, was hoping you might be able to help me figure out how to mount it.
ОтветитьGood review! I also made the mistake of not getting the combo pack.
ОтветитьFantastic and very comprehensive. Would you recommend the combo or just the gimbal by itself?
Ответить