Комментарии:
Every time I I build a lower regardless of how many times I've done it I always look at these videos. Thank you, Mr. Potter. It truly is a wonderful life, Geo. Bailey!
Ответить8.5 lbs lol. Woot
ОтветитьThanks for the waste of time
ОтветитьFr dude wtf
Ответитьtrash video
ОтветитьThe Brownells video is easier to follow with less fingers in the way
ОтветитьYou can hold the hammer with your palm and dry fire allowing the hammer to come back easy.
ОтветитьYeah, bad video, half the content is missing. Extremely fast, no clear explanation. Causes more confusion than anything. I’ve built over 20 and this video was a test and it failed. Miserably.
ОтветитьDang! I've been doing wrong. I've never used my receiver block, and I've always put my pins in from the right without a slave pin.😅
ОтветитьIm almost 100% he oriented the disconnecter spring the wrong way… I’ve “built” my fair share of lowers and unless I’m doing it wrong… the wide end of the spring goes facing up not down. And if I am wrong… years later no malfunction to speak of. The spring should naturally fit, if you put the wide end down first, there’s some resistance… because it doesn’t fit at all. This video isn’t for starters and a “slave” pin isn’t necessary (neither is a vice block) but makes life easier. If it’s your first time… ignore this video.
ОтветитьWhat are we supposed to look at? Lmao what a waste
ОтветитьIt would be nice if the video actually showed something besides his hands.....
ОтветитьTerrible viedo
ОтветитьJust stop giving money to the NRA, they are anti gun.
ОтветитьThank you Mr Porterfield. This was a big help.
ОтветитьI assume the safety selector is not needed😂😂😂
ОтветитьExcellent and informative video! Thank you!
Ответитьif you cant follow along to this you shouldn't be building a sandwich let alone a firearm
ОтветитьThis video sucks. Slow down and show more.
ОтветитьThank you for this video. I didn't have temporary slave pins, or a vice, but not difficult at all to reassemble it all with the help of this video.
ОтветитьFingers ......
ОтветитьLet's not bother with describing the parts so you will know what we are talking about. Which way is the front on the doohickey so I can put the open side of the watchimicallit facing the front.
Ответитьwaste of a video, didnt show the hammer spring
ОтветитьThe hammer and trigger pins are the same. 3 grooves. Two end grooves for hammer spring legs to lay in and keep trigger in from walking out. Center groove for hammer, little spring leg inside the hammer hole, keeps hammer pin from walking out. Safety/selector goes in first where it interacts with the trigger and disconnector assembly. Can not install safety after trigger. Safety, trigger, hammer, in that order.
ОтветитьThis video lacks all the important details people use these videos for lol
ОтветитьShe was shot by one of her own 99% of all cop shootings is from their own partner
Ответитьive built about 10 ARs to this video, Without a vice just a hammer and punch set. It helps to know how to put the spring on the trigger. This video doesn't help with that.
ОтветитьThanks for blocking what could be useful views.
ОтветитьCan't see anything... which direction do the trigger pins go in?
ОтветитьShould we show how the springs assemble? Midway: nah, let's just make it as confusing as possible and show almost nothing. Oh and if boss man can keep his hands covering the important stuff, that'll make it even better.
Ответитьreally poor instructions on the hammer assembly. Legs of the spring on the pin? thats it? how about some video on it?
ОтветитьDoes anyone have an extra pair of these they are willing to gave away
ОтветитьVoo this video
ОтветитьYou can’t see half the install this is booty
ОтветитьWhat a useless video
ОтветитьHere’s a view of my hand while I work behind it
ОтветитьThis is a really bad video
ОтветитьAbsolute worst video ever. Basically not helpful at all. No shot of the trigger spring in an installed position. No shot of the hammer spring at all. The images that were shown that you might be able to infer about looked like a person with Parkinson’s holding the parts. I got mine working b/c I had done it before just needed a refresher but a newbie can forget about learning anything from this video.
ОтветитьThis was my first lower receiver build. I have replaced several triggers with single stage modules. I have watched several other videos on the lower receiver to see trigger install. I did have to watch the part of installing the hammer three times to catch spring positioning. Any improvements suggestions would be to stop and include a good look inside housing showing spring placement. Thank you
ОтветитьLet’s also not tell people that you need to install the safety first or you have to take everything out and do it all over
Ответитьthank you,
ОтветитьI’m pretty sure this is the worst install video I’ve ever seen in my life
ОтветитьUseless
ОтветитьMove your grubby paws couldn't see anything.
ОтветитьWhere or how do I make a slave pin? My build didn’t come with one.
ОтветитьCan't see what you doing with the hammer
Ответить