I made a TOOL for ebikes - Bafang 750 FreeWheel Remover

I got my tool! Yahoo! ✅

Will the tool work on a Himiway

I paid $49 for this tool. I just received it for my rad mini. And it does not fit. $49! WTF!

Please help.
Your tool not working

Very cool. I'm assuming it's a no go for the Bafang 500W motors typically found on Rad bikes?

Shut up and take my money!

I've been imagining this very thing. I'm gonna try a few solutions and see what happens but I may need to buy that tool. Are you guys getting better delivery times?

$50?? Bit hefty don’t you think? You can get a custom made one from Rad Power Bikes for $15 +$10 shipping, so $25 by itself. Bundle it with something else like I did (extra battery charger) and the shipping charge isn’t so bad. If you email them and ask for one and any other items you may want, they can send you a direct invoice. The tool from them has a section cut out of it so you can slide the wiring through, so you would have to make sure you put the tool in a baggie afterwards so you don’t lose the parts. This one by Area13 is one piece so that may be worth the extra $35 to some? Just another option for those looking. Good luck!

Is that Ryan former Voltbike tech?

Anything on the horizon for cassettes, like on the Blackbird?

I will be sharing this my group on Facebook. M2S Bike forum.

What is the part number to order

We never used a wrench on one of those tools. Putting a wrench on that tool and wrestling around with a loose wheel would indeed take two guys and one of them stands a chance of being hurt.

We always clamped the tool into a vise then lowered the wheel onto the tool. Only takes one mechanic to grab both sides of the wheel and turn counterclockwise. Much safer.

Love your videos. I’m trying to make beach chairs and beach carts for challenged people with wheeez balloon tires can you help me out

Does this work for a 350W Bafang hub motor too?

I just bought it from bolton bikes and freewheel his customer service is very good they shipped the wrong item and he reshipped the right one in 2 days. !

Doesn't fit over the nut on my 750 watt bafang motor.

23 seconds into your video shows a bike on a rack with only the front wheel up. Where did you get that? The handy handlebar rack doesn't seem to be made for bikes with fenders.

YO YO Kyle Area 13 u da man top ebike specialists and business man can you tell me what RadPower ebikes will the 750 Watt upgrade motor fit in? Will it fit in the new RadPower RadExpand ebike?

Whelp, I need one of these.

Looked at getting one. Im in Klamath, Ca. do you really have a 90 day backorder?

we ordered one from area13 but it got cancelled hope you can hook us up as we really need this in the Philippines.

My (7000 miles) Radwagon4 750w motor is working but there is no peddle assist. There is a disconnect. Is there an intermediate part that fits over axil first and then the 7 gear cassette slides over both part and axil. Can that intermediate part be ordered and be replaced? Name of part? My two-legged mule is hurting. Turns out cassette and freewheel slide on differently. Another special tool? Forum even mentioned that a spacer is required with cassette.

Cost 50$ 👏 👏👏

I was about to send back my new 11-32 freewheel. This is just what I am looking for!

😍😍😍😍 thank u so much

I recently purchase a himiway cobra and quickly learned the stock gearing sucks, which leaves me shopping for an 11-32 freewheel. The motor says himiway and I assume it's just a rebranded befang, however they were smart in running the wire on the opposite side.

Ouch just spent $102 CAD for this with international shipping. If it doesn't work I'm gonna cry

Does It work on the Himiway and how do I get one.

Amazing tool I need one Asap ! when will they be back in stock ?

if only they knew the actual tool is like a spark plug wire remover pliers that you squeeze the handles together after slipping over and slide into the socketed chamber. handle is built in on the tool gentlemen. i guess this is just a harder way of doing it that does work. oh well.

keep up the great work

i’m need one please

I just cut the wire 😂

Can you still buy the tool?

Is your tool for sale yet, your link doesn’t seem to have the slotted one. I’m trying to remove my freewheel on my RadRover 6 Plus, please assist

Were can i order one .i need one

I usually use a 4 pound hammer and bear it into submission. Which means I usually just buy a new one, and I feel better

Hey, my staff made 2 of these disappear from my toolbox, can you please make me 2 more asap? 🙏

Um those are like $2 on ebay

Used mine yesterday to go to a drift maniac 11-34 freewheel after failing to get it off with one I had cut down the side, this worked perfectly, I did have to very slightly file down the edges of the nut with a dremel to get threw but super easy worth every penny.

Well, we received the tool today and I wish it was the same as the one in this video. Ours would not fit over the 18mm axle nut so we had to dremel the insides a bit to get it to slip over. Once inside it refused to fit the freewheel splines. We tried it on another freewheel and it would also not fit. We compared it to a Park Tool FR-1.3 and the splines do not match up.

Ordered the first generation one and it bent first time I used it , contacted them and they won’t replace it , it was out of warranty and I only got to use it for the first time , I asked them if they wanted a photo to prove it was still shiny and only used once , also said to them if the first gen was working why did they change it to version 2 , poor show lost all my respect for you .

looks like a great tool for my wheel... just cannot order it :(

Where can I get one ? Pls send link or something.. I need one. Thanks

I cut a slot through the normal removal tool with angle grinder, to make the cable to pass through.

I was going to do a similar video and looks like you did an amazing job. I have a Hovsco Ranger with a Sutto 500w. I wonder if you're tool will fit over the connector shell they use on that. I cut a .41 slot out of a fr-1.3, then cut a "wedge" to tap in to keep it expanded. That's actually what they do in the China shop. I have a video. They later sent.

I need the tool for the Shimano free wheel for my Himiway Cruiser

What other super handy ebike tool or product do you want created and why?