Комментарии:
Cam shaft in my 01 silverado LS 4.8 don't have that gear on the end.. so clearly no, you're not talking for all vehicles.
ОтветитьNice.
Do you produce camshafts for 1.6 tdi engine from Volkswagen?
Thank you
And how much in hp can improve the gaines?
Thank you
what cams would you recomend for 7 port injected car?
ОтветитьYou're not telling me what they do for my car ..
ОтветитьDoes the number 264/272/280 on subaru cams means the degrees of lift?
ОтветитьYou meant open 320 thou, not 320 degrees!
ОтветитьIt'very good
ОтветитьI came in wondering what a camshaft is and how it works I left wondering what a camshaft is and how it works
ОтветитьI have a mk1 golf GTi and would like to upgrade the standard camshaft but wish to keep a smooth idle……
What should I install.
Great video wish my teachers in school had the patience to explain principle of function the way man in the video did. BUT maybe I'm just getting older and I understand things better
ОтветитьWhat cams can go on a ford figo 1.4
ОтветитьWonder what would happen if you could get a modified vtec camshaft changing the profiles of the secondary lobes 🤔
ОтветитьI can't believe a set of decent racing cams costs a lot of money.
You're look at about $800 for a set of cams excluding valve springs and retainers.
The hole thing can cost $1500
Nice
ОтветитьLooks like Alfred moved on from working with Batman 😂 nice
ОтветитьParkerized???? Who cares! Parkerizing is worthless!
I’d pay for a good DLC job. That’ll actually protect it and provide an extremely low coefficient of friction.
But parkerizing is a crap treatment. It doesn’t work on firearms and doesn’t work on cams.
If I were to get a cam on a corvette, what would be a good tune for it after installing the cams
ОтветитьKENT - SCHRICK - ALQUATI CAMILO - HORMANN - HARTGE .......in 90s' TIMES !!!!
ОтветитьWhat do you reckon on 2.3 ford Scorpio frog eye engine what cams give it more bhp it's 145 now cheers
ОтветитьSo I can give my car a 2 stroke powerband? Epic
ОтветитьWhy doesn’t any manufacture put a DLC coating on their cams?
ОтветитьDo you need a tune with an aftermarket cam kit or is it just bolt-on?
ОтветитьIs that Adam swords from producer Michael
Ответитьwhat would be a proper cam shaft upgrade would you guys say for a bmw 335i 2008 with the twin turbo v 6 engine and would replacing the cams in a turbo car really make any more horse power
ОтветитьThey actually bored out the camshaft
ОтветитьWell done guys from Australia.
ОтветитьSo if i have an 05 f150 4.2l v6 and i want to get a little more power out of it but it still be a good daily is it worth getting a cam and if so, what cam should i get?
ОтветитьIf you're going to explain things in detail and in a way that a non expert can understand it's hard to hear you use terms such as "scatter cam" "scavenging" and "siamese" ports. Whilst someone with a working knowledge will relate to these terms, it's highly unlikely that someone seeking information in order to make an informed choice will find that information useful. Also perhaps a script, some diagrams, a little preparation would make this a much more user friendly presentation.
ОтветитьAnyone please answer.....
I replaced my street bike (sohc)with 10mm lift cam instead of 5mm lift. But the results are poor than the stock. Upgrade big carbs too and increased the compression ratio also.
please support...
Brilliant explanation about scatter cams! I had no idea it was to prevent port robbing before now!
ОтветитьHi, I'm new to the channel, love watching all the videos,, back in the mid 70's, my 1071 S, had a 649 cam in it, (so I was told when I bought the car),,
It sounded like a tractor below 3500, and then, all hell broke loose till around
7500 /8000 !!! Lol,,
How would the old 649 relate to modern cams ??
(the car had been tuned for hill climbing, and was a riot on the road,,,)
All the best, and keep the videos coming,,
Best regards, John .
I'm impressed with the cam for siamesed ports. This kind of design would also benefit people who have an old Chevrolet inline 6. Those engines have 3 intake ports.
Ответитьis this for the euro version🙀of cars any American style🤔
ОтветитьYou could have high lift and short duration OR high lift and short duration lmao
ОтветитьCam lift is how tall the lobe is on the camshaft. Valve lift is how far the valve comes off this valve seat and that can be changed by putting in different rocker arms without having to change the camshaft.
ОтветитьI love it all of em. These Friday tech videos are great. Bloody fantastic they helped me to totally understand the intricate areas of the mini.
ОтветитьWhat would you recommand for 1275 spi engine for a street racer. and I asume it would be wise to change rocker arms and springs at the same time?
ОтветитьGood and easy to understand information.
ОтветитьLooking at getting a cam kit from you guys in the new year 🤞🏼
Ответитьanother good video, cheers guys
Ответить